@M5PerfHydros btw, I was recently given for free, an alraedy fabricated Dumas Atlas Van Lines 1/8 (wood). Very messy construction and paint. Also missing a few items. The hobby store owner was all happy to rid it out of his shop, and now I have an ugly yellow thing in my garage that I've become mildly obsessed with. Not sure if I can attach a photo here.
I used to run fast electrics until my back got so bad I could no longer launch and retrieve boats. So...back to my actual first love, R/C Aircraft. BUT!!! This is one of the BEST videos I have EVER watched. Everything is very clear and understandable and Scott...you are also very entertaining. Thanks! Best 1.5 hours I have watched in a very long time although I don't plan to go back to running boats!
Those fine cuts in the tubing is in my best guess cut with a table top band saw where the blade is traveling in one direction "down" against the table top to eliminate all that bounce....
I have a video on my install in my Roadrunner. Thanks for your video it helped with my install. I'm taking my outrigger for testing to the River access tonight.
I was trying to install this in my 1/8th scale hydroplane, and it wasn't going at all like yours was going...I emailed Brent for help, and he got back to me right away and walked me through it..that was awesome.
Man how things have changed…lol, old school way back in the 70s, yup I’m that old, we would never let the thrust push on the engine, we had mini thrust bearings between the dog and strut,even later when the cable drives first came out we still pushed against the strut not the engine. Unless your system is only used on electrics?. Just found your channel and loved it, my son in his 40s has picked up the rc boat bug.
Oh ya, I did that myself in "the early days", and I'm still not convinced that a bearing at the strut isn't the best way to go. Although there's no good way to do that with the solid flex drive system, I think the lighter weight and higher rpm achieved with the solid drive is worth the trade-off. So many ways to slice a cat (and I've tried most of them!).
One of your best videos. For a beginner like me, all your videos are indispensable. My next ML Boatworks kit will arrive in 2 days. You relate well and your enthusiasm is contagious! Thanks.
I just put in an order from Brent. He was quick to respond to my emails and answered any and all of my questions. This video was my determining factor on my upgrade. This will be installed in my Roadrunner Rigger with 28.5cc full race modded engine. He is backordered on the stub shafts. I'm very excited to see the performance gains!!!!
When I was racing unlimited nitro hydros used to run parallel drive back in the 80s with 2 u-joints and 3/16 music wire and 3/8 brass tube and in the tube had 3 B-3 needle bearings. Made for an ultra fast boat.
I just found your channel and subscribed. I'm just getting started with RC boats. Having been involved with boat racing in the real world I've retired and looking for a playtime activity. I'll be watching.
I recognize those triangle boxes! Haha. I switched from coil to solid shaft in all my gas boats and immediately noticed a differences, especially on takeoff. When I pull the trigger on a coil drive, I could see and feel the delay of the drive windings up. When I tried a solid shaft for the first time.. the response was Instant 1:1. Never looked back. Boats got faster and more responsive and won a lot of races!
Just a quick note to wish you a "Happy Holiday" season. Being the socially conscience individual you are, I'm sure you, Jackson and the rest of the Meyers family are safe and waiting for this year to be over. Have enjoyed your u-tube videos. Hopefully when they establish a schedule for 2021, I will be able to watch a race or two. Thanks, and keep up the good / entertaining work. Dave K.
What a great product, love your attention to every detail! As a new subscriber it's easy to see how passionate you are with your models. I can appreciate that as i have that same passion. Looks like i have some ordering to do...
The best place to buy wood kits is MLBoatworks; mlboatworksrc.com/ Many good fiberglass boats and cowlings are also available from RC Boat Company; rcboatcompany.com/
OK, if I understand correctly there's a little hole in the outer brass tube (that is glued in) to hold the other brass stuffing tube with the solder through a tiny hole ? I'm not sure what I'm looking at (it's so tiny). Can you confirm ? Thanks! P.S. I've learned a lot !
Only because this was a retrofit from cable to solid drive. For a new build follow this video th-cam.com/video/Iedpqqx7YFg/w-d-xo.htmlsi=BfQ-8dkjnTEJxrLz
Really meticulous build! I do have one question for you though, what happens when you have to readjust the strut, can the new aluminum tube be flexed or bent?
Hi Ray, If I've built and balanced the boat correctly, the strut should be dang near perfect right off the build table. But of course, the world isn't perfect and there's almost always a small tweak or two needed, and the tube will forgive those small changes with no complaints at all. Stick around... I'm planning a set-up video soon that will explain how to position the strut for success the very first time it gets wet!
Excellent Video Scott! I especially loved the OSHA approved method of cutting the clamp slot in the end of the brass! I need to get this wire drive for my 1/7th scale boats. Solid Shafts with U-Joints are fast but LOUD!
Hi Michael, This is a 1/8 scale boat. The conversion was done for Bill Brandt at Rattlesnake RC who provided all the parts, so I don't really even know what the specs were. It's a legal build to race in RC Unlimiteds in the NW, so it would meet these specs copied from the rulebook; D. Technical Rules 1. Power and drivetrain a. Approved motors: L NEU 1527 1.5Y 850KV HET Typhoon 700-98 840KV i. Turnigy SK3-3994 850KV 1 iv. TP 4040 10V 830KV v. TP 4060 6Y 850KV 1. Approved as a test motor for 2020 Motors not on the approved motor list b. Shall not exceed the manufacturer's KV rating of 860 KV. 1. If the motor case is not clear marked with the manufacturer's KV rating, the owner should be prepared to provide documentation of the maximum KV rating of the motor. May not have a motor case exceeding the following dimensions: 1. Length: 105 mm (4.134 in.), this includes any bearing protrusions. 2. Diameter: 42 mm (1.654 in.). c. Twin motors are not allowed. d. Drive line either cable or hard shafts may be used, no gear boxes allowed. e. Any propeller may be used up to maximum of 57MM in diameter. 2. Electronic Speed Controls (ESC) a. Any ESC may be used as long as it is rated to a minimum 130 Amps and rated to handle a minimum of 8s battery configuration. b. Anti-spark resistors are advised on all speed controllers. 3. Batteries a. A maximum capacity of BS Lithium Polymer (UP) batteries are approved. Only LiPo batteries with a cell rating of 4.20 or less volts per cell are approved. Maximum charged voltage is 33.84 volts b. LHV batteries with per cell capacities to 4.35 volts or higher are not approved
Great video series Scott! I'm learning tons of stuff. After having installed and run the Byers wire drive do you have any comments or recommendations for improvements? Any particular troubling points of failure? I'm just looking over an ML Boatworks 1/10 scale electric kit and am considering the wire drive.
Whatever you do, never run a cable again, especially in the electrics. The Electro Eliminator is still running the same drive with zero failures and super fast!
I am newby and just complete my hull to 53” weedy gasser, deep vee, homelite engine. My plans has the exact shaft drive as you yellow hydroplane “ U21”. Can you recommend and sell me drive shaft, adjustable shaft drive holder. I sure could use you help, I have built into the keel at 3/8 shaft hole, so I am at the point anything can be adapted to make work. John Wanhainen
Final video that I've binged watched again mate haha can't wait to see the next one 😊 even as a sport runner watching your builds have helped me so much and there's so much knowledge and truly cool stuff thankyou for making the videos and of course pit tours are truly wicked
Good idea, but I'm finishing packing up the whole shop right now to move. How about this... When The Boat Shop 2.0 is finished in the spring I'll do a grand tour of my new digs!
EXCELLENT video , what a perfectionist . I think you could be my next best friend , wish I lived around the corner so I could just stop by and learn . Obviously I'm new to rc boats . I was wondering could you would you please do a video on balancing a boat . Getting the right center of gravity for any type . I cant find enough info to learn how to do it . I find bits and pieces but not 100% sure . Any help would greatly appreciated thanks .
i have always called the drive dog the connection between the cable and the prop and on the motor end a flex ferrule...if you google just drive dog instead of cable drive dog, your going to get a good laugh...enjoy your videos..i live across the border, Vancouver Island and use to race several classes many years ago...i new many members from Washington club area...Woghog Lake sound familiar to you.
Jackson knows what’s up😎 Thanks for sharing all this great RC boat setup. Just easing back into brushless FE after focusing on other RC stuff for the last 15 years. My Aveox setups are loving Lipo power😎
I was wondering if you try to balance your boat according to where the "Centre of Gravity" should be? The plans of the boat I am building shows a CG point on the boat and the instructions talk about weight forward Vs weight rearward... rearward = more chance to flip the boat etc. What is your opinion on this?
Oh boy.... That would take a whole video to discuss. Wait a sec.... I'll make a video! Thanks for the idea Paul. Meanwhile, try to center the weight of the boat near the center of the turn fin and you'll be fine
Not sure if you mean the electronics for the boat or the entire boat itself. If the boat hull... YOU can build it! But if you're just looking for hardware and electronics contact Bill Brandt at Rattlesnake RC, he should be able to set you up with everything you'll need. Get him here; www.allrc1.com
You should have used a hardwood block and drilled the appropriate diameter hole to accept the tubing. Then inserted the tubing into the block and tack in place with a very small dab of super glue and then proceed with the cut.
I'm building a sport 20 electric hydro and the water we run in is brackish (Not so easy to find a good freshwater place to run in Hawaii). Would you recommend this shaft for my use or should I stay with a flex cable?
@@M5PerfHydros Thanks! Another question...I noticed you use oil with this wire drive, on our current boats we use marine grease instead of oil because of the corrosion from the brackish water. Would I still want to use grease with this or use oil?
I've converted my boats to a solid flex drive system and don't use cables anymore, but you can get them from a number of sources. A couple I prefer are Rattlesnake RC and Zippkits. www.allrc1.com and www.zippkits.com
In a previous video you were going to increase the motor water jacket inlet and outlet nipples. Did you ever do that ? It looks like they are the same original size.
That was a great video very well done really enjoyed it loved your shop to I also race and I can tell by all the small details that you pay attention to is why you are doing well at it I learned back in the sixties it's those little things that'll get you to the Winner's Circle LOL thanks for all that hard work you did have a great racing season👍🍕🍻
great video. i watched it the day you posted it. i also tried to send Brent an e mail with no response to date. i am just wondering had you checked with Brent before dropping his info on the video to see if he is up to taking on new customers?
Yes Brent was aware I would be sharing his email. I contacted him after receiving your message and he tells me that my video has caused quite a stir and he's a bit overloaded with messages. He's working through them all so I expect you'll hear back from him soon. If not, please shoot him another email as he may have missed some along the way!
Mine or guy who makes the solid flex drive? How about both to be sure.. Mine is scott.meyers24@gmail.com, Brent's (wire drive) is bbyers@altamotive.com
Hey Scott I’ve really been enjoying your videos lately, I just bought my first nitro hydro after ten years of flying rc helicopters and jets. I’m excited to get out on the water and plan on building an outrigger while the ice is covering up the lakes up here in Maine, I have two quick questions, it’s perfectly fine to just run 2 stroke klotz oil on my shaft instead of marine grease? Is that what u do ? Which I’m hoping so because my other hobbie is dirt biking so I have all kinds of klotz! And last quick question, do u happen to have any fast used boats or hulls for sale? I’m also on all the forums too but please if u have one you’d like to sell, I’d love the chance to own such well taking care of boat, nitro or electric. If you happen to I can send my email and send pixs etc. thanks scott, From Scott!
Hi Scott (cool name by the way), I do use grease on the cable. Old fashioned I know, but there it is. I have considered using some sort of oil, and klotz would be good as any I should think. What I would never do is add an oiling cup like I see in a lot of boats. Adding the unnecessary weight would make my head explode!
Oh and second part... No boats for sale currently, but stay tuned. I'll probably sell two at the end of this season to make room for new. Find me on Facebook and you'll see them listed eventually
th-cam.com/users/shortsFXI-K7E4sbg?feature=share here is my running video with the solid flex shaft. Not the best but was on the river with low visibility.
Such a great video. This was my second time around and now I’m a little more confident on what needs to happen.
You can do it!
At 55, i didn't realize how much I missed modeling. Too caught up in the rat race. Thanks for the videos. You're doing a great thing for the cause👍.
At 62 I didn't realize how much I miss having money, so I'm still building boats!
@M5PerfHydros btw, I was recently given for free, an alraedy fabricated Dumas Atlas Van Lines 1/8 (wood). Very messy construction and paint. Also missing a few items. The hobby store owner was all happy to rid it out of his shop, and now I have an ugly yellow thing in my garage that I've become mildly obsessed with. Not sure if I can attach a photo here.
Turn it into a beautiful yellow thing, put a motor in it and give it life!
I used to run fast electrics until my back got so bad I could no longer launch and retrieve boats. So...back to my actual first love, R/C Aircraft. BUT!!! This is one of the BEST videos I have EVER watched. Everything is very clear and understandable and Scott...you are also very entertaining. Thanks! Best 1.5 hours I have watched in a very long time although I don't plan to go back to running boats!
Thanks Jim!
Those fine cuts in the tubing is in my best guess cut with a table top band saw where the blade is traveling in one direction "down" against the table top to eliminate all that bounce....
Yep, no doubt. Super thin blade too!
I have a video on my install in my Roadrunner. Thanks for your video it helped with my install. I'm taking my outrigger for testing to the River access tonight.
Cool! Let's see some video
I was trying to install this in my 1/8th scale hydroplane, and it wasn't going at all like yours was going...I emailed Brent for help, and he got back to me right away and walked me through it..that was awesome.
Bingo!
Man how things have changed…lol, old school way back in the 70s, yup I’m that old, we would never let the thrust push on the engine, we had mini thrust bearings between the dog and strut,even later when the cable drives first came out we still pushed against the strut not the engine. Unless your system is only used on electrics?. Just found your channel and loved it, my son in his 40s has picked up the rc boat bug.
Oh ya, I did that myself in "the early days", and I'm still not convinced that a bearing at the strut isn't the best way to go. Although there's no good way to do that with the solid flex drive system, I think the lighter weight and higher rpm achieved with the solid drive is worth the trade-off. So many ways to slice a cat (and I've tried most of them!).
One of your best videos. For a beginner like me, all your videos are indispensable. My next ML Boatworks kit will arrive in 2 days. You relate well and your enthusiasm is contagious! Thanks.
How's the build coming?
I just put in an order from Brent. He was quick to respond to my emails and answered any and all of my questions. This video was my determining factor on my upgrade. This will be installed in my Roadrunner Rigger with 28.5cc full race modded engine. He is backordered on the stub shafts. I'm very excited to see the performance gains!!!!
Awesome!
How do we order the parts ?!
@harrystatic1494 Go back to the video and you'll find ordering information in the video description
When I was racing unlimited nitro hydros used to run parallel drive back in the 80s with 2 u-joints and 3/16 music wire and 3/8 brass tube and in the tube had 3 B-3 needle bearings. Made for an ultra fast boat.
Thought of that .... Kinda heavy and complicated, but I do think it would be faster than cable
@@M5PerfHydros It is faster for less weight than cable
I just found your channel and subscribed. I'm just getting started with RC boats. Having been involved with boat racing in the real world I've retired and looking for a playtime activity.
I'll be watching.
Welcome aboard Harry! Thanks for watchin' and subscribin' .... Now go build a boat!
I went and got one for the thunder boat.
Attaboy!
Just got my package from brent installing it this weekend can't wait to showup at the club with my new setup .......
Nice! Go get 'em!
3:18 That tight spot on the cable is called the spine. Same thing with glass fishing poles and golf club shafts.
I recognize those triangle boxes! Haha.
I switched from coil to solid shaft in all my gas boats and immediately noticed a differences, especially on takeoff. When I pull the trigger on a coil drive, I could see and feel the delay of the drive windings up. When I tried a solid shaft for the first time.. the response was Instant 1:1. Never looked back.
Boats got faster and more responsive and won a lot of races!
There you go!
This is very informative!! Can’t wait to try it!!
You'll never go back!
Just found your channel and REALLY enjoy your style.! You're like the AvE of R/C boats (hope you've seen Ave's videos). So enjoyable 😍
Thanks Robb!
That is really cool. Never seen a wire drive like that before. Great looking kit!
Great video and humor! Learn new building techniques every time I watch your videos.
Thanks Robert. Now put that knowledge to work and go build a boat!
Just a quick note to wish you a "Happy Holiday" season. Being the socially conscience individual you are, I'm sure you, Jackson and the rest of the Meyers family are safe and waiting for this year to be over. Have enjoyed your u-tube videos. Hopefully when they establish a schedule for 2021, I will be able to watch a race or two. Thanks, and keep up the good / entertaining work. Dave K.
Thanks Dave, it's been a crazy year for sure but I think we'll get a full season next year!
Scott.....when you get some time, would you do a video on a typical transmitter and receiver installation and the channels that you use.
Nice long Vid! Really enjoyed it with the weather setting in for Winter!
Great video! Thanks for the detailed instructions on how to install, set up to run, and maintain.
You're welcome Tim!
What a great product, love your attention to every detail!
As a new subscriber it's easy to see how passionate you are with your models. I can appreciate that as i have that same passion. Looks like i have some ordering to do...
Build a boat!
Awesome video!!
Thanks Jeff, Now go build a boat!
Where do you get your build kits from?
The best place to buy wood kits is MLBoatworks;
mlboatworksrc.com/
Many good fiberglass boats and cowlings are also available from RC Boat Company;
rcboatcompany.com/
you have an excellent workmanship sir. i am your follower now
Thanks again!
Very nice job!!! Beautiful boat!
Glad you like it!
OK, if I understand correctly there's a little hole in the outer brass tube (that is glued in) to hold the other brass stuffing tube with the solder through a tiny hole ? I'm not sure what I'm looking at (it's so tiny). Can you confirm ? Thanks!
P.S. I've learned a lot !
Only because this was a retrofit from cable to solid drive. For a new build follow this video th-cam.com/video/Iedpqqx7YFg/w-d-xo.htmlsi=BfQ-8dkjnTEJxrLz
Can you use the non flex drive shaft for the Sonicwake 36 V2 boat?
That's a question for the builder of the flex drive system, Brent Byers. You can reach him here; bbyers@altamotive.com
Thanks Chris for the three different kinds of power boats I think that's very nportant to beginners to know👍.
Really meticulous build! I do have one question for you though, what happens when you have to readjust the strut, can the new aluminum tube be flexed or bent?
Hi Ray,
If I've built and balanced the boat correctly, the strut should be dang near perfect right off the build table. But of course, the world isn't perfect and there's almost always a small tweak or two needed, and the tube will forgive those small changes with no complaints at all. Stick around... I'm planning a set-up video soon that will explain how to position the strut for success the very first time it gets wet!
Excellent Video Scott! I especially loved the OSHA approved method of cutting the clamp slot in the end of the brass! I need to get this wire drive for my 1/7th scale boats. Solid Shafts with U-Joints are fast but LOUD!
So you missed when I cut the wire on the bench next to two gas cans huh? Frankly I'm a little disappointed in you! 🤣
@@M5PerfHydros Dangit, now I gotta rewatch! How did I not notice that!
I use this systém 20 ears 🤗🤗🤗 and anothere things...
What scale is this boat? Can you give specs on the motor esc prop and batteries for the race ready version?
Hi Michael,
This is a 1/8 scale boat. The conversion was done for Bill Brandt at Rattlesnake RC who provided all the parts, so I don't really even know what the specs were. It's a legal build to race in RC Unlimiteds in the NW, so it would meet these specs copied from the rulebook;
D. Technical Rules
1. Power and drivetrain
a. Approved motors:
L NEU 1527 1.5Y 850KV
HET Typhoon 700-98 840KV
i. Turnigy SK3-3994 850KV
1
iv. TP 4040 10V 830KV v. TP 4060 6Y 850KV
1. Approved as a test motor for 2020 Motors not on the approved motor list b.
Shall not exceed the manufacturer's KV rating of 860 KV.
1. If the motor case is not clear marked with the manufacturer's KV rating, the owner should be prepared to provide documentation of
the maximum KV rating
of the motor.
May not have a motor case exceeding the following dimensions: 1. Length: 105 mm (4.134 in.), this includes any bearing protrusions. 2. Diameter: 42 mm (1.654 in.).
c. Twin motors are not allowed. d. Drive line either cable or hard shafts may be used, no gear boxes allowed. e. Any propeller may be used up to maximum of 57MM in diameter.
2. Electronic Speed Controls (ESC)
a. Any ESC may be used as long as it is rated to a minimum 130 Amps and rated to handle a minimum of 8s battery configuration.
b. Anti-spark resistors are advised on all speed controllers.
3. Batteries
a. A maximum capacity of BS Lithium Polymer (UP) batteries are approved. Only LiPo batteries
with a cell rating of 4.20 or less volts per cell are approved. Maximum charged voltage is 33.84 volts
b. LHV batteries with per cell capacities to 4.35 volts or higher are not approved
These videos are great. Thanks for making them.
Glad you like 'em John!
Great video series Scott! I'm learning tons of stuff. After having installed and run the Byers wire drive do you have any comments or recommendations for improvements? Any particular troubling points of failure? I'm just looking over an ML Boatworks 1/10 scale electric kit and am considering the wire drive.
Whatever you do, never run a cable again, especially in the electrics. The Electro Eliminator is still running the same drive with zero failures and super fast!
Why couldn't you be able to put a shim in between the shaft and the motor collet? If you needed to?
I'm not sure I understand. For what purpose, and where exactly are you talking about?
I am newby and just complete my hull to 53” weedy gasser, deep vee, homelite engine. My plans has the exact shaft drive as you yellow hydroplane “ U21”. Can you recommend and sell me drive shaft, adjustable shaft drive holder. I sure could use you help, I have built into the keel at 3/8 shaft hole, so I am at the point anything can be adapted to make work. John Wanhainen
Hi John. Brent Byers makes the driveline parts that I use. You can contact him here; Brent Byers
Final video that I've binged watched again mate haha can't wait to see the next one 😊 even as a sport runner watching your builds have helped me so much and there's so much knowledge and truly cool stuff thankyou for making the videos and of course pit tours are truly wicked
great video and info..... wil you ever do a shop tour and boat collection video be cool to see?
Good idea, but I'm finishing packing up the whole shop right now to move. How about this... When The Boat Shop 2.0 is finished in the spring I'll do a grand tour of my new digs!
wicked cool idea im in best of luck on your move stay safe
Really informative and detailed video, Scott!
Thank you!
EXCELLENT video , what a perfectionist . I think you could be my next best friend , wish I lived around the corner so I could just stop by and learn . Obviously I'm new to rc boats . I was wondering could you would you please do a video on balancing a boat . Getting the right center of gravity for any type . I cant find enough info to learn how to do it . I find bits and pieces but not 100% sure . Any help would greatly appreciated thanks .
Stop by the shop and we'll talk about it! But seriously, yes I've been thinking about doing a complete "set-up" video... Coming soon!
i have always called the drive dog the connection between the cable and the prop and on the motor end a flex ferrule...if you google just drive dog instead of cable drive dog, your going to get a good laugh...enjoy your videos..i live across the border, Vancouver Island and use to race several classes many years ago...i new many members from Washington club area...Woghog Lake sound familiar to you.
Yup I've heard some of the guys talk about lake Waughop near Tacoma, but never run there myself
Great video as always, when do the gasser 2.0 videos start or perhaps a new electric boat?
On hold, sadly, though there is light at the end of the tunnel.... I'm moving into The Boat Shop 2.0 (construction starts soon)!
Hi Scott, is Brent still making these shaft kits? I sent him an email but haven’t heard back from him
Be patient, he deals with dozens of emails daily and sometimes takes several days to respond
Jackson knows what’s up😎
Thanks for sharing all this great RC boat setup. Just easing back into brushless FE after focusing on other RC stuff for the last 15 years. My Aveox setups are loving Lipo power😎
Post office crushed my box from Brent in the same exact spot But much worse amusing
It's a conspiracy!
I was wondering if you try to balance your boat according to where the "Centre of Gravity" should be? The plans of the boat I am building shows a CG point on the boat and the instructions talk about weight forward Vs weight rearward... rearward = more chance to flip the boat etc. What is your opinion on this?
Oh boy.... That would take a whole video to discuss. Wait a sec.... I'll make a video! Thanks for the idea Paul. Meanwhile, try to center the weight of the boat near the center of the turn fin and you'll be fine
Any suggestion on who builds/sells large scale hydro electrics?
Not sure if you mean the electronics for the boat or the entire boat itself. If the boat hull... YOU can build it! But if you're just looking for hardware and electronics contact Bill Brandt at Rattlesnake RC, he should be able to set you up with everything you'll need. Get him here; www.allrc1.com
Is a solid flex drive viable in a 40xx 1000kv 8s 36" catamaran ? Sorry if this is a dumb question. lol
Heck I dunno... That's a good question for the developer! Get him here; bbyers@altamotive.com
@@M5PerfHydros lol, Thanks for the honest reply.
@@M5PerfHydros Do you have a good link or e-mail for him?
Yup bbyers@altamotive.com
Thanx for the great video, i learned a lot.
Nice ! Thx !! 👍🏼🇦🇹✌🏼
This is really awesome! I smashed the "like" button only because there is no "love" button 😉
I'm feelin' the love!
You should have used a hardwood block and drilled the appropriate diameter hole to accept the tubing. Then inserted the tubing into the block and tack in place with a very small dab of super glue and then proceed with the cut.
But that wouldn't be nearly so exciting...
What kind of oil you using there?
To lube the shaft and strut? I just used two stroke oil, same as premix for gas motors
@@M5PerfHydros I'm wondering if using marvel mystery oil would be ok?
Too thin I think
Omg an hr job turned a day job listening to gjis
I'm building a sport 20 electric hydro and the water we run in is brackish (Not so easy to find a good freshwater place to run in Hawaii). Would you recommend this shaft for my use or should I stay with a flex cable?
Heck yes! Just be sure to remove it after use and you'll be fine!
@@M5PerfHydros Thanks! Another question...I noticed you use oil with this wire drive, on our current boats we use marine grease instead of oil because of the corrosion from the brackish water. Would I still want to use grease with this or use oil?
Brent says oil... I use the Klotz 2 stroke oil, same as for my gas hydros
Nice system. Question you solder that brass tube with tin material?
Yes, standard lead/tin solder as you'd use for electrical soldering
Scott where can I get an alignment tool like you use?
I made it myself, but you can get a similar tool from Brent Byers here; Brent Byers
Where do you get your flex cable
I've converted my boats to a solid flex drive system and don't use cables anymore, but you can get them from a number of sources. A couple I prefer are Rattlesnake RC and Zippkits.
www.allrc1.com and www.zippkits.com
@@M5PerfHydros I assumed you made your own considering you modified everything
Right? I've thought about it, but when I find someone building a thing exactly as I would or even better, I like to support them and buy it from them
@@M5PerfHydros talked with Jeff wohlts about them almost set one of mine up with the wire but......
Perfection!
In a previous video you were going to increase the motor water jacket inlet and outlet nipples. Did you ever do that ?
It looks like they are the same original size.
Shame on you for not watching all my videos! 🤣 YES I show what was done in this one; th-cam.com/video/ScHUHNkOVvI/w-d-xo.html
That was a great video very well done really enjoyed it loved your shop to I also race and I can tell by all the small details that you pay attention to is why you are doing well at it I learned back in the sixties it's those little things that'll get you to the Winner's Circle LOL thanks for all that hard work you did have a great racing season👍🍕🍻
Thanks Paul!
Great video
Thanks Karl!
Who sells the alignment tool
bbyers@altamotive.com
More builds please)
Adam, We've moved to a new property to build a new, larger boat shop... Much more video coming soon!
Sounds good
Chris from Az/ tried to contact Brent by your email address and haven't heard back in a week. What do I need to give him to move forward?
What address did you use?
Received a reply back from Brent / my fault / spam / now I can move forward.
great video. i watched it the day you posted it. i also tried to
send Brent an e mail with no response to date. i am just wondering
had you checked with Brent before dropping his info on the video to
see if he is up to taking on new customers?
Yes Brent was aware I would be sharing his email. I contacted him after receiving your message and he tells me that my video has caused quite a stir and he's a bit overloaded with messages. He's working through them all so I expect you'll hear back from him soon. If not, please shoot him another email as he may have missed some along the way!
@@M5PerfHydros Thanks much appreciated
I have gotten through the back log of emails, but I didn't see one from you. What's your email address?
What is the dia. of the wire .000???
Huh... I dunno, never measured it. Doesn't look like .125", maybe .100", but I'm using memory only since everything is packed away due to our move
@@M5PerfHydros can you send me the email address
Mine or guy who makes the solid flex drive? How about both to be sure.. Mine is scott.meyers24@gmail.com, Brent's (wire drive) is bbyers@altamotive.com
Hey Scott I’ve really been enjoying your videos lately, I just bought my first nitro hydro after ten years of flying rc helicopters and jets. I’m excited to get out on the water and plan on building an outrigger while the ice is covering up the lakes up here in Maine, I have two quick questions, it’s perfectly fine to just run 2 stroke klotz oil on my shaft instead of marine grease? Is that what u do ? Which I’m hoping so because my other hobbie is dirt biking so I have all kinds of klotz!
And last quick question, do u happen to have any fast used boats or hulls for sale? I’m also on all the forums too but please if u have one you’d like to sell, I’d love the chance to own such well taking care of boat, nitro or electric. If you happen to I can send my email and send pixs etc. thanks scott, From Scott!
Hi Scott (cool name by the way),
I do use grease on the cable. Old fashioned I know, but there it is. I have considered using some sort of oil, and klotz would be good as any I should think. What I would never do is add an oiling cup like I see in a lot of boats. Adding the unnecessary weight would make my head explode!
Oh and second part... No boats for sale currently, but stay tuned. I'll probably sell two at the end of this season to make room for new. Find me on Facebook and you'll see them listed eventually
HEY, COBBER, UNREAL & THANK YOU >X:)0
I had to look up what a Cobber was... apparently it's a good thing, so thanks Mate!
th-cam.com/users/shortsFXI-K7E4sbg?feature=share here is my running video with the solid flex shaft. Not the best but was on the river with low visibility.
Nitro is much better then electric cus it's much more fun
Get on with it already