How to Silicone Behind Taps
ฝัง
- เผยแพร่เมื่อ 19 มิ.ย. 2024
- In today's video I will showing you how to silicone behind taps, and other tricky spaces. I'll also be running through the various methods for removing silicone.
Here's a link to the blog post I wrote, explaining how I built the vanity unit featured in today's video charliediyte.co.uk/bathroom-w....
You can buy me a coffee here www.buymeacoffee.com/charlied... or become a monthly member to unlock Discord forum membership, exclusive content and automatic entry into my FREE Monthly Giveaway. Thank you SO SO much!!
🛠Charlie DIYte Amazon Tool Store www.amazon.co.uk/shop/charlie... - all my tried, tested and much loved DIY tools are now in one place on-line.
Today's Video sponsor - Corefix bit.ly/3fdQdkw
Available at Screwfix bit.ly/3ghU4ys, B&Q bit.ly/3i0YB8V, Ironmongery Direct bit.ly/2Dn1fXp and many more
Today's Toolkit UK
- Fila Protective Detergent for Tops geni.us/pZLHTV (Amazon)
- Stanley window scraper geni.us/saUkosg (Amazon)
- Stanley Fatmax knife blades pack of 10 geni.us/M8seP (Amazon)
- Fugenfux Silicone Joint Puller set - bit.ly/3ws0NhF
- Cramer Profiling Kit 7 geni.us/92Ct1th (Amazon)
- Cramer Profiling Kit 7 plus rotating nozzles geni.us/PSnn2n (Amazon)
- Cramer Rotating nozzle geni.us/yLwK (Amazon)
- Cramer Profiling Kit 7 replacement blades geni.us/NAmRO89 (Amazon)
- CT1 Multisolve solvent spray geni.us/A2SF3ZJ (Amazon)
- Lithofin MN Polish Cream 150ml geni.us/AqsbCp (Amazon)
- Draper silicone sealant removal tool geni.us/97w5y8w (Amazon)
- Everbuild silicone sealant eater and remover tool bit.ly/2BMJkcc
Today's Toolkit US
- Fugenfux Silicone Joint Puller set geni.us/AQNE (Amazon)
- Cramer Profiling Kit 7 geni.us/dlrcB (Amazon)
- Rotating caulk nozzle 10 pack geni.us/pbX8QB (Amazon)
- Stanley window scraper geni.us/Dd5Be (Amazon)
- Goddards Granite and Marble Polish geni.us/uDm5qY (Amazon)
* The Amazon links above are affiliate links. It doesn't cost you anything to click on them but I do earn a small commission if you do.
And here's the legal bit I have to state: As an Amazon Associate I earn from qualifying purchases.
SUBSCRIBE - you can subscribe to my Channel here:
/ charliediyte
LET'S CONNECT!
Charlie DIYte
-- Email: charliediyte@gmail.com
-- / charliediyte
-- charliediyte.co.uk/
-- / charliediyte
-- / charliediyte
#silicone #behind #taps - แนวปฏิบัติและการใช้ชีวิต
![ทัศนศึกษาโรงงานผลิตโค้ก [THAI/ENG SUB]](http://i.ytimg.com/vi/M9y-TJBNem0/mqdefault.jpg)
Great advice. I followed your thoughts and choice of tools and now I mastic like a professional. The testing it out on small sections is invaluable. Works for me on a daily basis as now renewing mastic is part of most days. Tyvm sir
Thanks again. My silicone skills have really improved since starting to watch your channel. A really good tip that I picked up from "
Bathroom Plumbing and Fitting" was to have a spray bottle with water and a little detergent to spray the tissue before cleaning the tool.
Another fantastic tutorial!
The modification of the tool at the end was so clever. Top work!
Great video, nice to see someone tackle a real life silicone application. Plus go into the difficulties of running silicone across a tiled surface...Good job 👍🏻
Just purchased the Cramer kit to mastic my completed bathroom refit, I dreaded the mastic more than anything !! It can make a good job look awful...and to my surprise the Cramer kit helped me achieve the best ever silicon mastic I've ever done, by far....thanks for your video's on the subject, they helped me no end ! Gave me the confidence to have a go ! Keep up the great work !!! Steve.
Nice job Charlie and those tools look pretty useful. However, of all the silicone techniques I've ever used (a LOT) the VERY best by far is when using masking tape on both the horizontal and vertical mating surfaces (or other angles too). By leaving whatever gap necessary for the size of bead I require, I then use a silicone "finger/thumb" to FORCE the silicone into the gap as needed and also I can repeat as often as I like to get as much silicone as required into the gap. Leave for ten minutes and remove the tape carefully at an angle away from the bead and the job is done.
When siliconing upstands onto a new kitchen worktop last year I dry fitted the upstands to check for fit against the wall and top, then fitted tape flat to the top, vertical to the upstand, flat on the top surface of the upstand and vertical on the wall above the upstand prior to fitting. when fitting I used no-more-nails (or equivalent) then a substantial bead of silicone on both the top back edge and the bottom edge then fitted the upstand,.ensuring the silicone was exuding from the whole of the top and the bottom. ensured it was pressed uniformly back into the gaps top and bottom with the silicone rubber thumb, final smooth off, remove the tape and a bead of just 2 mm perfectly fitting between base and worktop and able to compensate for less than perfectly flat walls by adding more silicone as required in a few places before final smoothing and removing tape at the top too.
Absolutely THE tidiest job I've ever managed in over 40 years of different techniques. The best thing about it is than it works great behind taps and in awkward corners, but ALSO always the use of one's own fingers without being too concerned about ultimate accuracy.
Easily the best set/series of siliconing videos on YT. What a resource.
Nothing wrong with sponsorship, I'd actually prefer you to be payed for the videos and your help,
Problems comes if you was stop checking yourself or greed starts to creep up and start becoming dishonest, and favour your profit over value for money for your viewers,
But I'm fully confident that you are a scrupulous , moral, hardworking, wanting to help others for free type of person so you'll always check yourself,
Though we all make mistakes, and flows I think you're great upright individual person,
And my hats of to you, respect for your help which is self-evident.
Bless stay safe all in these troubled times.
Just moved into our new home (not a newbuild) and am loving your tips on the silicon application as I am replacing all silicon in the house !! Thank you Sir !!
You're welcome, Richard. Thanks for the comment 👍🏻
Some relaxing DIY during this pandemic, love it, Charlie.
Thanks buddy 👍
Some advice from a regular user of mastic.....your video is very informative and there are some great points of advice, 1 I personally dont agree with is not wetting down the area prior to tooling off. I also believe a straight cut nozel forces mastic between the surfaces, but if you can keep the bead of mastic neat and parallel as possible as you you apply it you then can wet surrounding areas and tool the mastic. This helps excess being spread in unwanted areas and will improve the finish of the mastic (smoother surface) and will not leave fine smearing that can be caused by the dry profile tool. To clean tools used during and after upvc solvent cleaner an an old cloth works perfectly, cheaper than the ct1 spray and old cotton t-shirts cut up will save the paper roll consumption. Great video overall 👍
Excellent video presentation for someone new to applying silicone.
Thanks.
Looking forward to refreshing my shower tray. I bought all the kit after watching your pro video and then broke my hand. Hope to get the job done in a couple of weeks time. It’s a job I’m nervous about but I’ve got all the kit now.
Charlie you really are a mind reader🙌🏻 I accidentally🙄🙄 removed some of the silicone from my bath an sink after spraying Astonish Mould an Mildew Blaster to clean my tiles. So ended up removing the rest an today honestly went to look for your previous fantastic videos an you had just uploaded a new one🙋🏼♀️😜😂 You are a life(well stress) saver😂 Thank you for another excellent vid😜🙌🏻
Excellent tutorial as always. Full of handy tips.
Peeling out silicone in one giant piece is oddly satisfying! Bought a Cramer fuji kit and rotating nozzles based on a previous video and glad I did. Wish I'd known about the multisolve before. Inherited mosaic tiling in a shower cubicle with a terrible silicone job done previously. Nightmare made a lot easier especially with the rake tool. Same mosaic tiles with a very very small gap between the tap with plug mechanism and the wall. Not sure the fugenfux kit will fit when at 90 degrees to the wall, but looks like, with the long handle that something good might come of it.
Another excellent video Charlie - many thanks. I’ve just re siliconed my bath having watched your original video on this using the Fuji kit - wow! What a difference! I’m now going to be tackling all the dodgy silicone jobs done in the past that have been annoying me for years! Thanks for giving me the confidence to do this.
You're very welcome, Simon. So glad you aced it, and thanks for letting me know. If you haven't seen it already, take a look at my corners video if you have time, th-cam.com/video/EErbuodMOAM/w-d-xo.html as I didn't really cover corners that well in my original video. 👍
Did you get the Fuji or just generic silicone tools?
I have sharpened the front edge of one of the old fashioned potato peelers for removing silicone and it works a treat, you know the pointy ones.:)
Thank you for your videos! I started caulking with tape now I use the same tools as you and I do amazing jobs. I love caulking (sometimes) lol. I do like to finish with my finger still because I find myself spending to much time detailing with the tools
I purchased the Fugi tools that you first recommended about a year ago. They are really good thanks
Another great video, very concise.
Really good video Charlie - bought one of those kits after your first video and have used them 3 times now with excellent results. Must try the multi solve spray - I used Stanley knife blades and then methylated spirits to remove the old silicone
Great stuff Charlie! You are by far the best DYI on TH-cam and a silicon magician.
Wow, not sure about that, but that's incredibly kind of you 👍
Very comprehensive and cleared up a lot of questions.
15:00 Just wow! look at how much effort it takes to make these tutorials and then using so much silicone and tissues etc!
Proper DIY channel
thanks mate! much appreciated
I used a hair dryer to heat along the silicone, and it just pealed right off . So easy.
Thats what I did too 😁
A ringing endorsement!
@@daytona1960 u single
Excellent job your videos are always very informative thanks
What another great and useful vid Charlie. Super explanation and thank you for posting as I have some black silicon to replace on my granite worktop....
Behind the kitchen sink taps.
Perfect 👍🏻👍🏻👍🏻👍🏻
Thanks Charlie for showing me how to do my first silicon job properly. Great videos with useful details. Keep the good job going!
You're welcome Lubo. Thanks for the comment 👍
Another great video Charlie! Here are a few points which may be useful:
a) Some 45 degree silicone applicators are so cheap you could cut one back and glue it to a suitable handle
b) You can get a cap that just screws onto a half used silicone tube
c) In your previous video about how to fill a bath with water before siliconing the edges I looked at the setting time for the silicone which was hours so, to keep dry, I did the edges first and then filled the bath with water
d) Using 45 degree edges is not for timid DIYers as it is always so tempting to smooth off with a finger which of course is for concave edges
I've done that with cap better the screw in end of nozzle.but I found just a plastic sandwich bag over tube screw nozzle back on.
Great stuff Charlie, very helpful
Thank you. All the best
Thanks, your videos have been the best I've seen on this topic. I've been working on removing very old caulking around my shower frame on a fiberglass surround. I've found that soaking a paper towel in rubbing alcohol and then laying it on the caulk for about 30 minutes really softens it up. I learned this trick from another video that showed how to clean calcium deposits off a toilet bowl with paper towels soaked in vinegar.
Thanks, that's very kind. Clever! I guess the same technique would work to remove mould - soaking the towel in bleach 👍
Just purchased that ct1 sealant remover from your link, cant wait to use it on my next silicone job, hope it works as good as it does in your video, nothing worse then trying to take off old silicone when its baking hot and your blade has gone blunt
Hi.
I've just re-siliconed bathroom and for the difficult areas to remove the sealant, I modified a hacksaw blade by gently grinding the teeth away then sharpened it. It worked really well.
Good thinking. I can see that would work well 👍👏
Thanks charlie, that was very informative, take care and be safe as always
Fantastically helpful as always, thank you.
It's so nice to find a bloke who doesn't use tape or hose it down with soapy water
Thanks. It's an absolutely no no as far as I'm concerned because it compromises the joint as I explained here th-cam.com/video/_DI4hfHM_Hg/w-d-xo.html 👍🏻
Thanks Charlie, very usefull info.
Excellent tutorial
Thanks
Helpful as ever. Thanks again.
Nice video. Those Fugenfux tools certainly look handy! Wish I had known about them before redoing the silicon around my shower enclosure, it'd certainly have made a neater job in the area between the enclosure and vanity unit!
Clear explanation easy to understand and followed Love it! Thank You Charlie.
You're welcome. Thanks for the comment 👍🏻
Nice one Charlie. Lots of useful info. Thanks.
Thanks for your vids in siliconing...I have ordered a cramer kit and going to have a go siliconing windows and doors 👍
Did my bath yesterday based on your Fugi videos and achieved perfection, except for behind the taps. Should have got something like this.
Wow! Applying silicone the 'correct' way is labor intensive! Very instructive video.
Labor intensive but worth it, because if you do it right once, you shouldn't have to re-do it for a very long time 👍
Sealing my bath in the morning. Dreading it... Watched some of your videos , I'm not much good with silicon..... Love your double sink by the way.
As usual, a highly practical and well presented video....many thanks.
Thanks buddy 👍
Thank you so much for showing us how to do this. Much appreciated.
You're welcome. Thanks for the comment. 👍
Interesting vid. Smoothing agent works and this is how. Squeeze an 8mm bead in your joint, spray with soapy water, now take a 6mm jointing tool and use it. The excess is removed leaving a smooth 6mm bead, the trick is to use a smaller tool than the bead you have squeezed. Cheers.
Hi Charlie, very interesting, particularly the swivelling nozzle. I think I would have done the ends separately after the main bead had cured.
I found the information in this video to be extremely helpful. Can't wait to try the new fugenfux tool. Thanks a lot.
Glad you found it useful. It's a great little tool. Thanks for the comment.
Charlie, I would like to thank you for introducing me to the Cramer kit 7. Its already made it in to my ‘goes to every job’ tool box 👍.
How I’ve not heard of this kit before just proves I am in my own little world. The Current Misses is right.
Well done mate. The sign of a good trade is someone who's always open to new ideas and innovations. It's awesome isn't it! Massive thanks for the comment 👍🏻
Thank you for such a brilliant video full of useful tips and tricks. So much good info in this video. Thanks again. Andrew K-B. 🙂👍
Great video as always Charlie. 🙌
Thank you so much. So informative and helpful. I also very much like your tool recommendations.best regards
Heather
Aw, thanks Heather, I really appreciate the comment 👍 Good luck with your siliconing and drop me a line if you've got any questions.
great video - brilliant tip on storing the used silicon with an old nozzle
Thanks Mike 👍
Super helpful, thanks!
Top work Charlie👍
That diy focus music. Gets me right in the zone
another fantastic video thanks for sharing this information with us enjoyed the video.
You're welcome, and good to hear from you again 👍
Excellent! 👏Thank you for sharing!
You're welcome. Thanks for the comment. 👊
I've been using a silicon spatula - originally intended for getting cake mixture out of the mixing bowl - with some success. Not sure if I can add a photo but it looks to be the same material as in the video
Well done Charlie the best lve seen yet
Nice one Charlie, do check his other videos, lve picked up so many great tips, I'm off to silicone round my bath now stress free
Another excellent video on how to achieve the best possible result when applying a silicone seal to surfaces. I purchased the kit as shown in the first video on "how to silicone" and it did take me three jobs before I became proficient with the tools, but it's absolutely worth persevering. My tip for getting to grips with the tool would be these:
1/ Have plenty of paper roll to hand to wipe the excess silicone from the tool
2/ Hold the silicone gun straight and don't be tempted to angle it as if the nozzle were cut at an angle
3/ As point 2, keep the tools straight to the silicone and don't be tempted to angle it when smoothing off, despite one's desire to do so - take a leap of faith, it works!
Spot on 👍🏻
Is the beveled side of the tool supposed to lead or the flat side? Why is one better than the other?
@@wingerrrrrrrrr flat
As always a fascinating watch.
Thanks David. The silicone still looks as good as when it was done, by the way (as it should do, of course).
Thankyoubfor your great advice Charlie
You're welcome Joanne. Thanks for the comment (and for watching my vid) 👍
Very good tutorial, love all the outtakes.
Thanks Steve 👍
Thats is the best way to remove silcone thanks great video
Used masking tape up tp now and attempting to cut a 2mm strip of tape behind the taps but i wont be using that method again after watching this. Charlie is neat, clean, precise, and so in other words, a pefectionist. Trouble is,o nce you get like this you'll never be 100% with any finished job
Brilliant, Many thanks
Another great video Charlie - well done.
Thanks Ian, I appreciate that 👍
Brilliant video Charli.Best scraper i used is made by Olfa Japan.
Also there are caps i recently found on Amazon to prevent hardening of an unused silicone tube,cheers.
Thanks, I appreciate that 👍 I'll check out those caps. Thanks for the tip.
Great video as always. You have to be careful with the solvent not to damage your waterproofing/tanking if you are doing this on a shower. In this case, better not to spay directly on the silicone....
Good video, lots of little tips.
I don't know if anyone else has mentioned this, but here's another tip I do all the time.
When changing tubes I take the nozzle from the spent tube and put it on the new one. This has two advantages. As Charlie mentioned, it's difficult getting silicon out of a used nozzle which would normally get thrown away. Enough silicon gets wasted when sealing anything so at least you're not chucking nozzles away full of the stuff. You also get to save a brand new nozzle from the new tube which can come in handy if you need to seal a gap with varying thickness.
Thanks Garry. Good tip 👍🏻
Great tips! If you happen to own an air compressor, as a final step before re-siliconing, use it with a small tip and high pressure to blast away any debris or moisture that may still remain in the gap. A can of compressed air works too if you don’t own an air compressor.
Cheers Mike. Good thinking. 👍
Thanks for the tip on that solvent ! I've bought a Cramer kit 7 and it's well worth the money for the results you can get. ( I watched your original sealing video )
Thanks Norman. Yes, it's a lovely bit of kit that will pay for itself many times over. Thanks for watching my vids 👍
Really enjoy your channel. When storing a part used tube of silicone, a suitable sized screw in the end of the nozzle seals it nicely, and is easy to remove for future re-use.
Very helpful tips! Thanks 👍
You're welcome. Thanks for the comment 👊
Found it such a difficult and messy task applying silicone! Will refer back to this video when I need to do the job again in the kitchen and bathroom etc..
Practice makes perfect, my friend. But these forming tools are an absolute must. You would have found it much easier with one of these.
Hi Charlie, Great Video! You give great tips and advice. Would you be able to make a video to give any tips and advice on cutting 15mm and 22mm copper pipes in difficult places for example bath tub. Thanks
really enjyoed these presentations learned alot Thanks!
Thanks. Really glad you found it useful 🙏
best thing I've found for cleaning off sealant are the blue "big wipes" from screwfix & toolstation etc....they are incredible at removing everything including silicone sealant!!
Amazing video, I would have killed for those right angle nozzles about a month ago! Cheers. BTW whats the tune at about 14 mins?
Great video mate! Any tips for sealing 2 surfaces that are at an acute angle where the 90 degree tools wont fit? Cheers!!
Great videos!
Hi Charlie - great videos - do you have one for sealing between outdoor walls and patio's that butt up against them (i.e. outdoor Veranda/pathway/Concrete floor )
Making a good silicone beed in any bathroom or kitchen job can be difficult and I have tried many different techniques and fancy expensive tools like you demonstrate. I now don't use any tools now other than the five different size beed runners I have on my hand ie my fingers, and I only usually use the two smallest. The marble vanity unit you demonstrate on is a nice easy job, and I don't think that plastic lollipop thing would fare very well on tiles with grouting lines that run perpendicular to any flat surace. I use masking tape, run parallel to the joint on both horizontal and flat surface set back from the joint by about 4mm to 5mm. I ensure the tape is pushed firmly into recesses at grouting lines so there is no gap. I then carefully run the silicone into the joints ensuring there is just enough silicone in so there is not too much excess, the least excess the better. I also make sure the nozzle is cut smaller than the joint to ensure there is good penetration of the silicone into the joint. I run my finger (making sure my hands are clean beforehand) dampened a bit with water and a little washing up liquid, run it along the joint quickly to do the initial beed and remove excess sealant, then fill in any low spots with sealant, run along again usually with my pinkie finger. I may do this two or three times whilst the silicone is still soft so as to remove as much excess off as possilbe.The flexibility and softenss of your skin allows it to adjust to any uneven spots at grouting lines etc. I don't apply too much pressure. Leave it for 10 minutes or so and then pull off the masking tape making sure I pull the tape off diaganally away from the joints. The masking tape ensures that any excess build of sealant does not get onto the surface of the bath, shower tray or whatever surfaces you are sealing, so excess build up is not so much a problem. I also put masking tape around any sanitary ware such as taps etc because cleaning silicone smudges off chrome and acrylic can be a pain. I have found this method to be the easiest and by far the cheapest method of getting good even and attractive silicone beeds. I think those tools are ridiculously priced for what they cost to make. A little practice using the method I explained can ensure you get just as good a job, if not better with your just your hands and masking tape.
I feel like this is caulking university - Thank you for this video
Taking your advice I bought the fugi kit 7 and never looked back! That is a lovely vanity unit. Did you make it yourself?
amazing videos!
Great Charlie, pity you can't get that waste back in the Silicon tube but perhaps later on the will come out with something , Stay Safe !!!.
Great video. I can see why using silicon can be daunting for DIYers. I'm a Glazier for over 30 years and silicon joint everything imaginable. I must confess if you're not use to handling silicon your advice is perfect 😊 But for volume of work wetting down beads before smoothing is a far better finish.
I suppose as long as your bead completely covers the joint and doesn't need to be pushed out any further to an uncovered area, it would be okay. If it's dry though, it could allow the gathered silicone to be used for sealing down the line, so it might be more conservative of the amount used.
Thanks for the tips! Guess you can of fashion a shaping tool yourself but with the blade in the kit it seems worthwhile.
Thanks Chris. You could, but it's the composition of the rubber combined with the way it's bevelled that makes this tool so effective at producing such effortless, clean lines.
Great Presentation!
Thanks 👍
I use Multi Solve, And always keep a can in the Van. CT1 have brought out a new Sealant BT1! It use supposed to never go mouldy. I haven't tried it as yet.
great video charlie, would be great to see a real life tester of those wall fixings.
Really helpful caulking videos! :)
Regarding fitting the cramer tool behind the tap: maybe next time you can cut the tool shorter / in half :) the concave corner won't be used probably ;)
The best way IME to remove silicone is to use a snap off craft knife, with the blade extended fully. This makes the blade bend flat against the vertical or horizontal surface and makes the job easy. I will do a video on this when I get a chance. Good video ! 👍