Ein sehr schoenes Modell! Light bulbs on a model steam power plant are problematic; I must have burnt out a dozen on my 1/16 inch scale steam locomotive, trying to accommodate the various steam conditions. Experimenting with steam pressure regulators introduced other problems. I finally gave up and used a Light Emitting Diode (LED) for a light source and turbo-generator load. I simply ran the generator at full steam pressure and introduced the appropriate series resistor to keep the load current (Amperes) within the specifications of the LED. Worked like a charm. The 3 Watt LED gives off a tremendous amount of light. Just make sure that the generator produces direct current (DC). If not, use a bridge rectifier to convert the AC to DC.
Dankeschön 👍 habe die Zeit noch nicht gemessen.. Denke ca 10 min .. Fülle wohl schon Wasser aus dem Wasserkocher ein ,zuerst bißchen warmes zum Kessel vorwärmen 😉
@@dampfdirk5983Habe gerade das Video nochmals genauer angeschaut. Die hat doch keine echte Kreuzkopfführung? Bei 3:44 sieht man da seitlich rein und da müsste man Schleifspuren in der Führung sehen.
Die Märklin 16051 ist die Replika von der 4158/7 .. ( gleiche Aggregat Größe ) Die hab ich auch beide . Dieses hier ist die wesentlich größere 4158/11 👍
Mechanik-Musik; wunderbar anzuhören!
What a beauty, and she runs so smoothly
Mit weiten Abstand das schönste Model was ich zu sehen bekommen habe, echt Wahnsinn ein zu Metall gewordener Traum
Dankeschön ✌️Das stimmt wohl - Die ist was ganz besonderes 👍
Und wenn man nur 10 KM fahren muss um die Maschine abzuholen ist das noch unglaublicher 😉
I've always loved Märklin model steam engines. Would love a large model like this one but they are pretty hard to find and of course very expensive.
Beautifil engine 🤩
Eine sehr schöne Maschine mit einem super tollen Sound.
Amazing engine -- a true classic! (That light bulb didn't stand a chance!)
Ein sehr schoenes Modell!
Light bulbs on a model steam power plant are problematic; I must have burnt out a dozen on my 1/16 inch scale steam locomotive, trying to accommodate the various steam conditions.
Experimenting with steam pressure regulators introduced other problems.
I finally gave up and used a Light Emitting Diode (LED) for a light source and turbo-generator load.
I simply ran the generator at full steam pressure and introduced the appropriate series resistor to keep the load current (Amperes) within the specifications of the LED.
Worked like a charm. The 3 Watt LED gives off a tremendous amount of light.
Just make sure that the generator produces direct current (DC). If not, use a bridge rectifier to convert the AC to DC.
Nice
Beeindruckende Maschine!
Absolutely stunning engine... Thank you.
Wonderful engine , thanks for sharing !
schönes teil, und wenn sie warm ist, lüpp sie auch runder....
Ein Genuss anzusehen
Schön!
Die muss immer Einsatzbereit bleiben um den Notstrom zu liefern.
Hallo Dirk
Hab so eine ähnliche, wie lange musst du heizen bis sie läuft.
Geiles Video
Dankeschön 👍
habe die Zeit noch nicht gemessen..
Denke ca 10 min ..
Fülle wohl schon Wasser aus dem Wasserkocher ein ,zuerst bißchen warmes zum Kessel vorwärmen 😉
I would love one of those but put of my pay grade :)
Kann man wenn man bei der maschine mal richtig dampf gibt die schwungräder überhaupt noch per hand anhalten?
Ich habe es noch nicht ausprobiert 😉
Sehr schöne Maschine. Hat die eine echte Kreuzkopfführung, oder ist das nur Attrappe?👆👆👆👆👆
Alles echt 🙂
@@dampfdirk5983Habe gerade das Video nochmals genauer angeschaut. Die hat doch keine echte Kreuzkopfführung? Bei 3:44 sieht man da seitlich rein und da müsste man Schleifspuren in der Führung sehen.
beautiful, i have an replica in my videos
Die Märklin 16051 ist die Replika von der 4158/7 .. ( gleiche Aggregat Größe )
Die hab ich auch beide .
Dieses hier ist die wesentlich größere 4158/11 👍