Man that car came a long way well done Question 1# when you put side skirts on where do you jack it up at after that. 2# how much light you get thur on your head lights
I need to look again today to make sure but I’m pretty positive the side skirts don’t cover up the Jack/lift points under the car. They are pretty dim but I can still get enough light to see at night.
Do you have like some clear protective film on the lower back doors it says it’s suppose to stop rock from hitting the lower side i ask cause if you don’t then I’m gonna take mine off since they really dirty
how necessary are the braces? mine didn't come with any. also, i'm having a tough time connecting the middle and front pieces, almost as if they were bad molds. did you have the same issue or was the fitment perfect?
Nice job and it seem that you are adding something to your Stinger every week... BTW, where did you get your front plate? Is it custom made? I've been looking for something slim like that just to cover the bracket.
Thanks, yeah I try to keep posting a video every week if I can. I got the plate from eBay - www.ebay.com/itm/Laser-Cut-License-Plate-Delete-for-KIA-Stinger-with-Engraved-Text-/304096525668?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
Hi! it's my first time having a car, and I've bought the whole skirt kit, I was wonder if you need to make the screw holes yourself? or are they already in the car? kind of afraid to damage the body to make screw holes
I noticed that braces came with mine as well. Is there specific placement for them along the splitter? Mine just came today. Just waiting for my front splitter tomorrow and I’ll do an install. Hopefully all goes well. 🤞🏾
@@KDMCurt thanks a lot for your prompt responses man. Really appreciate you. You’ve been a great help. I’m working on installs this weekend for my k5. Is double sided 3m tape only used for the front splitter or should I be used all around for the side skirts and rear spats as well? I promise that’s my last question. So far, the side skirts and rear spats came out good. 👍🏾
The one in this video is a 20v impact drill. A regular drill will also get the job done I just wanted to use this one because I hadn’t in a while haha.
Como joder un coche precioso con tiempo y comprando horteradas en aliexpress... lamentable, si el coche pudiera hablar te ponía fino fino. Que pena, un coche tan bonito y lo hortera y poligonero que está.
Man you made that car look 10x better, even tho it already looks good stock😂
Haha thank you! 😁
Curt you gotta promise me you’ll install my mods for me when I get my stinger, I’ll pay and drive down there. Such awesome work great video as always
Man that car came a long way well done
Question 1# when you put side skirts on where do you jack it up at after that. 2# how much light you get thur on your head lights
I need to look again today to make sure but I’m pretty positive the side skirts don’t cover up the Jack/lift points under the car. They are pretty dim but I can still get enough light to see at night.
Thank you bro. Been looking for a minute
Glad I could help!
Do you think you can cut the little lip for the side skirt?I was looking at it and it seems pretty useless anyway and easy to cut
Do you have like some clear protective film on the lower back doors it says it’s suppose to stop rock from hitting the lower side i ask cause if you don’t then I’m gonna take mine off since they really dirty
Yeah I have those little stickers and they are starting to peel on the edges.
@@KDMCurt you think you gonna take them off or get some new ones?
@@IamKerious I’m just going to leave them for now but if they get worse I’m going to take it to the dealership and make them replace them.
Great video bro, stinger looks awesome!
Thank you!!
Another helpful informative vid. 🙌🏾 Are the head lights a tint overlay or would I get my headlights/taillights tinted like I got my windows?
Yes, it is a film like window tint.
how necessary are the braces? mine didn't come with any. also, i'm having a tough time connecting the middle and front pieces, almost as if they were bad molds. did you have the same issue or was the fitment perfect?
Nice job and it seem that you are adding something to your Stinger every week... BTW, where did you get your front plate? Is it custom made? I've been looking for something slim like that just to cover the bracket.
Thanks, yeah I try to keep posting a video every week if I can. I got the plate from eBay - www.ebay.com/itm/Laser-Cut-License-Plate-Delete-for-KIA-Stinger-with-Engraved-Text-/304096525668?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
Hi! it's my first time having a car, and I've bought the whole skirt kit, I was wonder if you need to make the screw holes yourself? or are they already in the car? kind of afraid to damage the body to make screw holes
Got a question did you line up the back wing with the front bumper and middle lip?
I tried to, if you walk around the car it looks like one continuous line sort of and that’s what I was shooting for.
FUCK YES FINALLY A NORMNAL DUDE WITH A STINGER IM HOOKED :D
Haha thanks, I appreciate the support!
Good stuff Curt!
Thank you!
I noticed that braces came with mine as well. Is there specific placement for them along the splitter? Mine just came today. Just waiting for my front splitter tomorrow and I’ll do an install. Hopefully all goes well. 🤞🏾
I didn’t really use any specific placement, just tried to make sure they were spaced out equally to hold the weight of the splitter.
@@KDMCurt thanks a lot for your prompt responses man. Really appreciate you. You’ve been a great help. I’m working on installs this weekend for my k5. Is double sided 3m tape only used for the front splitter or should I be used all around for the side skirts and rear spats as well? I promise that’s my last question. So far, the side skirts and rear spats came out good. 👍🏾
Never been a fan of the stock looking stinger, you've definitely changed my mind with the exterior mods you've done it looks sick man it looks good 👍
Yo I really appreciate that, thank you!! 😎
Nice work!! Look forward to your videos, I own a 2020 GT1.
Awesome, thanks for the support!!
How are they holding up any issues so far?
I actually traded in the car but when I did have it they were fine. Never had any issues.
Cant wait to learn what todo and what not todo on someone elses stinger ahahhaa!
Good job excellent work hey stinger 4 life stay safe brother peace
Serious question lol what Voltage is that drill ? Nice ass car btw
The one in this video is a 20v impact drill. A regular drill will also get the job done I just wanted to use this one because I hadn’t in a while haha.
@@KDMCurt sounds good I don’t know much about drills I have a 12v. I have a Nissan Sentra nismo tune+cold air. Not much exterior yet
@@quezwoodard1646 a 12v will work just fine!
amazing car
Thank you!!
People that talk about the stinger most likely couldn't even afford a stinger
That is very much correct lol
Como joder un coche precioso con tiempo y comprando horteradas en aliexpress... lamentable, si el coche pudiera hablar te ponía fino fino. Que pena, un coche tan bonito y lo hortera y poligonero que está.