This is a great and super helpful video! I had a system failing due to not enough space to create the EFI partition. Creating more space using Mini Tool Parition Wizard to create an unallocated 10 gb space did the job. But I followed the steps here to see what's happening in the conversion process. All is good now. Thanks!
Thank you very much! The IT Army is the goat! I wish you and your family good health sir!! This video helped where no other video could! I LOVE YOU :DD
Coversion was completed successfully but i got some following errors. Call WinReRepair to repair WinRe MBR2GPT: Failed to update ReAgent.xml, please try to manually disbale and enable winRe. MBRGPT: Before the new system can boot properly you need to switch the firmware to boot to UEFI mode! What to do next ? Kindly help im a starter.
thanks for the video IT Army, mine still says can't find room for efi partition. The setupact.log shows 3 partitions with no errors on any of them, then says mbr2gpt : conversion failed, and that's it no errors or explanation. The last partition type is a 39, it is the recovery partition. Any suggestions on this one. Thanks.
I have an SSD and a HDD. Windows is installed in the SSD but somehow the windows system reserved partition in created in the HDD (even why windows is installed oin the SSD). Now i can`t convert from MBR because whichever drive I adress it gives me errors. What can I do ? Thanks in advance!
Thanks for the great, detailed video. I'm getting an error "Cannot perform layout conversion. Error: 0x00000000" "mbr2gpt /convert /disk:0 /allowFullOS /map:222=EBD0A0A2-B9E5-4433-87C0-68B6B72699C7" It was solved by the above command!
check how many partition you have via "create and format disk partition" if you have 4 partition then you can delete one or merge it with another one. then run the command again. note that if you have 2 recovery partition you can delete and merge them using AOMEI Partition...
mbr2gpt failed to update reagent.xml please try to manually disable and enable winre. how can i resolve this problem , however the conversion was successful and i booted in Windows OS.
Can't we use EaseUS software this functionality is already available in that, which was used in your one of our video to convert logical partition to physical partition
This utility worked for me but upon rebooting windows wouldn't start up. Booted a recovery USB and selected fix start-up issues. It said windows could not fix your start up issues. Rebooted and it all works fine and now running GBT on c:.
A very helpful video indeed. I was wondering if these could be done offline? A friend gave me a broken and all that's intact is the hard drive (ssd) but upon checking I found out that there are 3 partitions on it: Reserved, Primary(MBR) and OEM partition(GPT). I tried to install windows 10 but it keeps failing, I tried converting it through cmd it while installing but it won't allow me. Could you help me please.
Thanks for the great, detailed video. I'm getting an error "Cannot map MBR partition type 28. Cannot perform layout conversion. Error: 0x00000000 I have the below details of my error info from Setupact.log. I haven't been able to upload a copy of my Disk Management window. I can send that, too, if you can tell me how to do it. (I saved it as PNG file with Sniping Tool.) It shows that Partition 1 is empty. Is it possible that I can delete it? I recently upgraded from Windows 7 to 10 and Partition 1 was present with Win 7. I don't know why setupact.log shows 4 partitions, as I only see 3 in Disk Management. Partition 1 shows as a Healthy Primary partition. Thanks. 2019-09-22 14:54:40, Info =========================================================== 2019-09-22 14:54:40, Info MBR2GPT: Performing the layout conversion 2019-09-22 14:54:40, Error LayoutConversion: Cannot map MBR partition type 28. 2019-09-22 14:54:40, Error Cannot perform layout conversion. Error: 0x00000000 2019-09-22 14:54:40, Info MBR2GPT: Partition information at error point 2019-09-22 14:54:40, Info =========================================================== 2019-09-22 14:54:40, Info Partition layout for disk: 0 2019-09-22 14:54:40, Info Partition style : MBR 2019-09-22 14:54:40, Info MBR signature: 2861995129 2019-09-22 14:54:40, Info Number of partitions : 4 2019-09-22 14:54:40, Info ===================PARTITION=============================== 2019-09-22 14:54:40, Info Number: 1 2019-09-22 14:54:40, Info Type: 28 2019-09-22 14:54:40, Info Boot: No 2019-09-22 14:54:40, Info Recognized: Yes 2019-09-22 14:54:40, Info Style: 0 2019-09-22 14:54:40, Info Offset: 1048576 2019-09-22 14:54:40, Info Length: 26843545600 2019-09-22 14:54:40, Info Volume: , Error:0x00000012 2019-09-22 14:54:40, Info Drive: None 2019-09-22 14:54:40, Info NT Path: \Device\HardDisk0\Partition1 2019-09-22 14:54:40, Info ===================PARTITION=============================== 2019-09-22 14:54:40, Info Number: 2 2019-09-22 14:54:40, Info Type: 7 2019-09-22 14:54:40, Info Boot: Yes 2019-09-22 14:54:40, Info Recognized: Yes 2019-09-22 14:54:40, Info Style: 0 2019-09-22 14:54:40, Info Offset: 26844594176 2019-09-22 14:54:40, Info Length: 472652972032 2019-09-22 14:54:40, Info Volume: \\?\Volume{2d3e5343-3036-11e1-848d-806e6f6e6963}\ 2019-09-22 14:54:40, Info Drive: C:\ 2019-09-22 14:54:40, Info NT Path: \Device\HardDisk0\Partition2 2019-09-22 14:54:40, Info ===================PARTITION=============================== 2019-09-22 14:54:40, Info Number: 4 2019-09-22 14:54:40, Info Type: 12 2019-09-22 14:54:40, Info Boot: No 2019-09-22 14:54:40, Info Recognized: Yes 2019-09-22 14:54:40, Info Style: 0 2019-09-22 14:54:40, Info Offset: 499497566208 2019-09-22 14:54:40, Info Length: 104857600 2019-09-22 14:54:40, Info Volume: \\?\Volume{aa969479-0000-0000-0000-604c74000000}\ 2019-09-22 14:54:40, Info Drive: None 2019-09-22 14:54:40, Info NT Path: \Device\HardDisk0\Partition4 2019-09-22 14:54:40, Info ===================PARTITION=============================== 2019-09-22 14:54:40, Info Number: 3 2019-09-22 14:54:40, Info Type: 39 2019-09-22 14:54:40, Info Boot: No 2019-09-22 14:54:40, Info Recognized: Yes 2019-09-22 14:54:40, Info Style: 0 2019-09-22 14:54:40, Info Offset: 499603472384 2019-09-22 14:54:40, Info Length: 504365056 2019-09-22 14:54:40, Info Volume: \\?\Volume{aa969479-0000-0000-0000-b05274000000}\ 2019-09-22 14:54:40, Info Drive: None 2019-09-22 14:54:40, Info NT Path: \Device\HardDisk0\Partition3 2019-09-22 14:54:40, Info =========================================================== 2019-09-22 14:54:40, Info MBR2GPT-undo: Removing the EFI system partition 2019-09-22 14:54:41, Info MBR2GPT-undo: Extending back the WinRE partition 2019-09-22 14:54:41, Info MBR2GPT: Conversion failed
First partition with partition id 28 (1C in hexadecimal number system) is creating problem. I guess you have ASUS machine and its the eRecovery partition that is creating problem. Please ensure whether you machine supports uefi or not. If it doesn't support you won't be able to boot after converting to GPT.
mine is converted in GPT but giving an error called "Failed to update ReAgent.xml, please try to manually disable and enable WinRE." will this create some kind of issue in my operating system????
Please share disk partition screen shot. I guess you don't have recovery partition. In case of OS boot failure you wont be able to boot to recovery console. You will need Windows installation media to do recovery.
My OS is in ssd drive which is drive C... but while validating or converting it always say "Cannot find OS partition(s) for disk 1" .... please check the below mentioned commands DISKPART> lis par Partition ### Type Size Offset ------------- ---------------- ------- ------- Partition 1 Primary 238 GB 1024 KB DISKPART> sel par 1 Partition 1 is now the selected partition. DISKPART> lis par Partition ### Type Size Offset ------------- ---------------- ------- ------- * Partition 1 Primary 238 GB 1024 KB DISKPART> det par Partition 1 Type : 07 Hidden: No Active: No Offset in Bytes: 1048576 Volume ### Ltr Label Fs Type Size Status Info ---------- --- ----------- ----- ---------- ------- --------- -------- * Volume 0 C NTFS Partition 238 GB Healthy Boot help me out.... please... Thanks in advance
how to resolve this log msg plz help ValidateLayout: Too many MBR partitions found, no room to create EFI system partition. though i have maximum three partition only
failed to update reagent.xml ... many people have this problem how to solve it . i have an old Asus laptop ... when i do mbr2gpt /validate /allowfullos is successfull but when arrived to convert reagent.xml is failed and its failed when reagent is enable ..... please help
@@itarmy2778 i do at the begining in the command prompt reagentc /enable and yes it goes enable but still failed to update can you help about it cause i guess its only the manufacturer can unlock uefi ..... thank you
its say The selected GPT formatted disk contains a partition which is not of type 'PARTITION_BASIC_DATA_GUID' and is both proceeded and followed by a partition of type 'PARTITION_BASIC_DATA_GUID' how to do this
@@itarmy2778 sorry sir i am replying you late, 1.In legacy mode no boot media available, something like this error. 2. In UEFI mode it starts dell troubleshooting and checking any hardware problem for 1:30 minutes after this it gives two options, press ESC to exit and press F2 to BIOS setting. Thanks for your reply.
@@itarmy2778 sir, actually i don't think there is any hardware related issue, because i have linux live flash usb and when i plug and run it UEFI mode it starts and i am able to access my hard disk data. So i think now i have reinstall window 10
I have a different problem, I have tried this method and your other video method. Both have failed. I will show you screenshots of disk management and error logs. Havent tried to convert as can't get it to even validate. Here they are mega.nz/#F!blw1AKxa!Rb5TY7a2odu5OcXIr2nYSA
Your boot partition is on disk 1 and windows is installed on disk 0. There is no empty space at the end of disk 1 so you need to shrink volume E by 10 MB
@@itarmy2778 How is my boot partition on disk 1 and how can i move it to disk 0 To give more info, my pc had a HDD where it had FREEDOS OS, I added a SDD and installed Windows 10 on it, and left the other harddrive for data but without formatting (just in case i had to leave the laptop as it came to return it in case it failed). And here we are now.
where there is problem in PC there will be legit solution by Indian Bros. Thank you so much
Welcome!
This is a great and super helpful video! I had a system failing due to not enough space to create the EFI partition. Creating more space using Mini Tool Parition Wizard to create an unallocated 10 gb space did the job. But I followed the steps here to see what's happening in the conversion process. All is good now. Thanks!
Glad it helped!
Thank you very much! The IT Army is the goat! I wish you and your family good health sir!! This video helped where no other video could! I LOVE YOU :DD
You're welcome! thanks for the greetings. Love you too.
Thank you so much for all of your videos on the MBR2GPT topic! You made my day!
Coversion was completed successfully but i got some following errors.
Call WinReRepair to repair WinRe
MBR2GPT: Failed to update ReAgent.xml, please try to manually disbale and enable winRe.
MBRGPT: Before the new system can boot properly you need to switch the firmware to boot to UEFI mode!
What to do next ?
Kindly help im a starter.
This is normal. The failed to update reagent.xml error. Safe to ignore that one and just enter the BIOS to make sure it's set to boot in UEFI mode.
thanks for the video IT Army, mine still says can't find room for efi partition. The setupact.log shows 3 partitions with no errors on any of them, then says mbr2gpt : conversion failed, and that's it no errors or explanation. The last partition type is a 39, it is the recovery partition. Any suggestions on this one. Thanks.
I have an SSD and a HDD.
Windows is installed in the SSD but somehow the windows system reserved partition in created in the HDD (even why windows is installed oin the SSD).
Now i can`t convert from MBR because whichever drive I adress it gives me errors.
What can I do ?
Thanks in advance!
did you find a solution i have the same problem ?
@@mehdihamouda5227 No, i did not. I just made a clean install of windows
Thanks for the great, detailed video.
I'm getting an error "Cannot perform layout conversion. Error: 0x00000000"
"mbr2gpt /convert /disk:0 /allowFullOS /map:222=EBD0A0A2-B9E5-4433-87C0-68B6B72699C7"
It was solved by the above command!
222=DEh, It's DELL's hidden diagnostic partition. I guess you have dell machine.
install Mini tool Partition Wizard and easily convert any MBR disk to GPT
@@firmware3293 yea after paying for the pro version way to sell your product
check how many partition you have via "create and format disk partition" if you have 4 partition then you can delete one or merge it with another one. then run the command again. note that if you have 2 recovery partition you can delete and merge them using AOMEI Partition...
how to fix when I convert it it says "Cannot find room for the EFI system partition" please help
one question, if I shrink my partition and then convert, and then boot, will my UEFi mode windows have less storage than before?
Seeing as nobody else has decided to answer this I shall. Yes it will have less space by whatever amount you shrink your partition by.
@@Jammermaker Oh shoot. Thank you, good thing I didn't do it
Thanks, It helps me a lot and at last, I succeed.
Glad it helped
Wowow, it was very useful and informative tutorial video. Thnx
Glad it was helpful!
mbr2gpt failed to update reagent.xml please try to manually disable and enable winre. how can i resolve this problem , however the conversion was successful and i booted in Windows OS.
Can't we use EaseUS software this functionality is already available in that, which was used in your one of our video to convert logical partition to physical partition
cannot create EFI system partition. Error: 0x000036B7 . Need help please
Nice, i cant even shrink my start partition
& What if i get this Error: 0x000036B7
can you tell should i do same procedure for this error while converting ?
My log was different, too many mbr partitions found , no room to create edi system partition
Hi, whenever we change map on OEM partition, we can convert mbr to gpt without deleting any OEM partition right?? Thnx
Yes we can.
This utility worked for me but upon rebooting windows wouldn't start up. Booted a recovery USB and selected fix start-up issues. It said windows could not fix your start up issues. Rebooted and it all works fine and now running GBT on c:.
Great
Great video, clear, to the point and very knowledgeable. Thanks for taking the time to do share.
Glad it was helpful!
i tried but i am getting an error "invalid arguments"
cannot find room for the efi system partition conversion failed what to do for this?
th-cam.com/video/t0i8hgo1E6A/w-d-xo.html
Thank you sir for the tutorial. Please, I need your assistance still I can't change mine
Welcome! Please share the error log.
A very helpful video indeed. I was wondering if these could be done offline? A friend gave me a broken and all that's intact is the hard drive (ssd) but upon checking I found out that there are 3 partitions on it: Reserved, Primary(MBR) and OEM partition(GPT). I tried to install windows 10 but it keeps failing, I tried converting it through cmd it while installing but it won't allow me. Could you help me please.
Install Windows 10 after deleting all the partitions.
My error is different, it say 0x000000C1, he cannot install new boot files. I searched on the internet but there is nothing
Please check the log file
Hi there, i have a question, with this explanation, can we change OEM partition or Reservation partition type to 7th and delete normally??
Yes
Thank you brother
Thank you!
Thanks!
Welcome!
it works
Thanks for the great, detailed video.
I'm getting an error "Cannot map MBR partition type 28.
Cannot perform layout conversion. Error: 0x00000000
I have the below details of my error info from Setupact.log. I haven't been able to upload a copy of my Disk Management window. I can send that, too, if you can tell me how to do it. (I saved it as PNG file with Sniping Tool.) It shows that Partition 1 is empty. Is it possible that I can delete it? I recently upgraded from Windows 7 to 10 and Partition 1 was present with Win 7. I don't know why setupact.log shows 4 partitions, as I only see 3 in Disk Management. Partition 1 shows as a Healthy Primary partition. Thanks.
2019-09-22 14:54:40, Info ===========================================================
2019-09-22 14:54:40, Info MBR2GPT: Performing the layout conversion
2019-09-22 14:54:40, Error LayoutConversion: Cannot map MBR partition type 28.
2019-09-22 14:54:40, Error Cannot perform layout conversion. Error: 0x00000000
2019-09-22 14:54:40, Info MBR2GPT: Partition information at error point
2019-09-22 14:54:40, Info ===========================================================
2019-09-22 14:54:40, Info Partition layout for disk: 0
2019-09-22 14:54:40, Info Partition style : MBR
2019-09-22 14:54:40, Info MBR signature: 2861995129
2019-09-22 14:54:40, Info Number of partitions : 4
2019-09-22 14:54:40, Info ===================PARTITION===============================
2019-09-22 14:54:40, Info Number: 1
2019-09-22 14:54:40, Info Type: 28
2019-09-22 14:54:40, Info Boot: No
2019-09-22 14:54:40, Info Recognized: Yes
2019-09-22 14:54:40, Info Style: 0
2019-09-22 14:54:40, Info Offset: 1048576
2019-09-22 14:54:40, Info Length: 26843545600
2019-09-22 14:54:40, Info Volume: , Error:0x00000012
2019-09-22 14:54:40, Info Drive: None
2019-09-22 14:54:40, Info NT Path: \Device\HardDisk0\Partition1
2019-09-22 14:54:40, Info ===================PARTITION===============================
2019-09-22 14:54:40, Info Number: 2
2019-09-22 14:54:40, Info Type: 7
2019-09-22 14:54:40, Info Boot: Yes
2019-09-22 14:54:40, Info Recognized: Yes
2019-09-22 14:54:40, Info Style: 0
2019-09-22 14:54:40, Info Offset: 26844594176
2019-09-22 14:54:40, Info Length: 472652972032
2019-09-22 14:54:40, Info Volume: \\?\Volume{2d3e5343-3036-11e1-848d-806e6f6e6963}\
2019-09-22 14:54:40, Info Drive: C:\
2019-09-22 14:54:40, Info NT Path: \Device\HardDisk0\Partition2
2019-09-22 14:54:40, Info ===================PARTITION===============================
2019-09-22 14:54:40, Info Number: 4
2019-09-22 14:54:40, Info Type: 12
2019-09-22 14:54:40, Info Boot: No
2019-09-22 14:54:40, Info Recognized: Yes
2019-09-22 14:54:40, Info Style: 0
2019-09-22 14:54:40, Info Offset: 499497566208
2019-09-22 14:54:40, Info Length: 104857600
2019-09-22 14:54:40, Info Volume: \\?\Volume{aa969479-0000-0000-0000-604c74000000}\
2019-09-22 14:54:40, Info Drive: None
2019-09-22 14:54:40, Info NT Path: \Device\HardDisk0\Partition4
2019-09-22 14:54:40, Info ===================PARTITION===============================
2019-09-22 14:54:40, Info Number: 3
2019-09-22 14:54:40, Info Type: 39
2019-09-22 14:54:40, Info Boot: No
2019-09-22 14:54:40, Info Recognized: Yes
2019-09-22 14:54:40, Info Style: 0
2019-09-22 14:54:40, Info Offset: 499603472384
2019-09-22 14:54:40, Info Length: 504365056
2019-09-22 14:54:40, Info Volume: \\?\Volume{aa969479-0000-0000-0000-b05274000000}\
2019-09-22 14:54:40, Info Drive: None
2019-09-22 14:54:40, Info NT Path: \Device\HardDisk0\Partition3
2019-09-22 14:54:40, Info ===========================================================
2019-09-22 14:54:40, Info MBR2GPT-undo: Removing the EFI system partition
2019-09-22 14:54:41, Info MBR2GPT-undo: Extending back the WinRE partition
2019-09-22 14:54:41, Info MBR2GPT: Conversion failed
First partition with partition id 28 (1C in hexadecimal number system) is creating problem. I guess you have ASUS machine and its the eRecovery partition that is creating problem. Please ensure whether you machine supports uefi or not. If it doesn't support you won't be able to boot after converting to GPT.
mine is converted in GPT but giving an error called "Failed to update ReAgent.xml, please try to manually disable and enable WinRE." will this create some kind of issue in my operating system????
Please share disk partition screen shot. I guess you don't have recovery partition. In case of OS boot failure you wont be able to boot to recovery console. You will need Windows installation media to do recovery.
i get an error saying " cannot find OS partition(s) for disk 0 " any idea on the issue?
system partition and boot partition should be on the same disk. Please share the disk partition screenshot.
My OS is in ssd drive which is drive C... but while validating or converting it always say "Cannot find OS partition(s) for disk 1" .... please check the below mentioned commands
DISKPART> lis par
Partition ### Type Size Offset
------------- ---------------- ------- -------
Partition 1 Primary 238 GB 1024 KB
DISKPART> sel par 1
Partition 1 is now the selected partition.
DISKPART> lis par
Partition ### Type Size Offset
------------- ---------------- ------- -------
* Partition 1 Primary 238 GB 1024 KB
DISKPART> det par
Partition 1
Type : 07
Hidden: No
Active: No
Offset in Bytes: 1048576
Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
* Volume 0 C NTFS Partition 238 GB Healthy Boot
help me out.... please... Thanks in advance
system and boot partition should be in the same disk. I guess you have system partition in the other disk.
@@itarmy2778 So is it possible to convert without performing a clean installation?
wow after striking my 10 gb lost and also i can't see a drive also so please make a video on how to extant rom
how to resolve this log msg plz help
ValidateLayout: Too many MBR partitions found, no room to create EFI system partition.
though i have maximum three partition only
Please check the log file.
failed to update reagent.xml ... many people have this problem how to solve it . i have an old Asus laptop ... when i do mbr2gpt /validate /allowfullos is successfull but when arrived to convert reagent.xml is failed and its failed when reagent is enable ..... please help
It is a warning. Just disable and enable the reagent
@@itarmy2778 i do at the begining in the command prompt reagentc /enable and yes it goes enable but still failed to update can you help about it cause i guess its only the manufacturer can unlock uefi ..... thank you
It failed and has me stuck in bios. Or black screen.
Please share machine specs and steps performed
thanks!
Welcome!
Thanks its working 👍
Welcome 👍
Bro
I'm getting this error.
''Too many MBR partitions found, no room to create EFI system partition.''
Disk layout validation failed for disk 0.
Help?
I've created one more video on this topic.
@@itarmy2778 can u please provide the link.
Salaam.
its say
The selected GPT formatted disk contains a partition which is not of type 'PARTITION_BASIC_DATA_GUID' and is both proceeded and followed by a partition of type 'PARTITION_BASIC_DATA_GUID'
how to do this
Your disk is already GPT.
Thank you
Validating layout, disk sector size is: 512 bytes
Disk layout validation failed for disk 0
what can i do ?
th-cam.com/video/ytRJhwL6vAg/w-d-xo.html
thanks alot for the info
You're most welcome.
Can you help me converting non OS disk from MBR to GPT?
Use some 3rd party software
"Cannot create EFI syatem partition" when I go to setuperr.txt it says "cannot format the partition" any idea to help me out with this
Try formatting to fat32 using diskpart or any third party software. Check your hard disk health if it is old.
where's your recovery partition?
Windows versions prior to 1909 didn't have separate recovery partition. System partition used to serve as recovery partition also.
@@itarmy2778 i have used laptop i dont even know when it was made
i have i5 2nnd gen can i convert lagacy to uefi
No
MBR2GPT sucessful but now my dell laptop does not booting, even changing Legacy to UEFI.😵😵😵
Is there any solution for this🙄🙄🙄
What error are you getting?
@@itarmy2778 sorry sir i am replying you late,
1.In legacy mode no boot media available, something like this error.
2. In UEFI mode it starts dell troubleshooting and checking any hardware problem for 1:30 minutes after this it gives two options, press ESC to exit and press F2 to BIOS setting.
Thanks for your reply.
May be some hardware or driver issue. Please take the backup and reinstall windows in UEFI mode or visit a computer technician.
@@itarmy2778 sir, actually i don't think there is any hardware related issue, because i have linux live flash usb and when i plug and run it UEFI mode it starts and i am able to access my hard disk data.
So i think now i have reinstall window 10
which laptop model?
aap hindi me samjhaya karo pls
Sorrry! It fail.
Please share the error message
I have a different problem, I have tried this method and your other video method. Both have failed. I will show you screenshots of disk management and error logs. Havent tried to convert as can't get it to even validate.
Here they are mega.nz/#F!blw1AKxa!Rb5TY7a2odu5OcXIr2nYSA
Please watch this video also th-cam.com/video/ytRJhwL6vAg/w-d-xo.html
Your boot partition is on disk 1 and windows is installed on disk 0. There is no empty space at the end of disk 1 so you need to shrink volume E by 10 MB
@@itarmy2778 How is my boot partition on disk 1 and how can i move it to disk 0
To give more info, my pc had a HDD where it had FREEDOS OS, I added a SDD and installed Windows 10 on it, and left the other harddrive for data but without formatting (just in case i had to leave the laptop as it came to return it in case it failed). And here we are now.
@@itarmy2778 Now after shrinking E it says "Cannot find OS partition for disk 0"
Just for the record, same happens if i try it for disk1
日本語訳があると助かるのだけどなあ・・・
ごめんなさい、日本語がわかりません 😊
@@itarmy2778 Thank you for your reply. I failed the conversion, but leave the MBR.
I've created videos on that topic.
@@itarmy2778 Thank you . I have to be careful. I'm not used to difficult work.
Thanks!!!
Welcome!
Welcome!