I noticed in these countries in all the factories no matter what they toss everything on the ground instead of putting it in containers so it can be easily moved around. They toss it in the dirt then sombody comes along and picks it up again and puts it into a bag or some other container. I watched a recycle vid they have these huge bags of pop bottles and just dump it in the dirt and scatter it all over hell then the workers go through it and pick it off the ground very weird . They wont use conveyor belts either the worker will fill what ever bucket he has walk climb stairs dump the bucket into the machine go back to the pile on the ground and pick it all up by hand and start the process all over walk back and forth climb stairs n dump really weird
The extractor fan in the wall of the aluminium buffing process shed is a good start. Why not use ducting from the fan to each wheel. ?.That would take out far more dust and keep the area cleaner. Aluminium dust is very bad when breathed in.
You beat me to it. It seems that is the norm in everything that they make. Everything is a mess no matter what they make. Work smarter not harder, but obviously doesn't apply in Pakistan.
اكن كل التقدير والاحترام لهؤلاء الناس العمال انهم يكدون و يتعبون كي لا يسقطوا تحت رحمة الغرب الصهيوني الشيطاني عندما تكون تنتج ملتزماتك يحترمك الجميع ولا احد يستطيع التطاول عليك شكرا لكم ايها الابطال المثابرون
The only thing that separates the brake levers from $150 levers is the guy with the drill press that just wallers the heck out of the cast hole instead of precisely drilling through the parts. All the rest of that work is a waste because they'd be worth several times more if they improved that step.
En este siglo en que estamos es una vergüenza ver seres humanos trabajando en esas condiciones y más niños no sé cuál es el índice de mortalidad en Pakistán por enfermedades pulmonares pero no debe estar bajo.pero tienen que aserlo para sobrevivir.muy triste.
If you look at the machinery there is no maintenance they dont clean it they dont even grease it . If you look at the one machine it has grease zerks on it and its bone dry the ram is bone dry never been greased. This equipment must be WW II surplus there is no way a new machine would take this kind of abuse . Bare feet around all those shavings and metal to shove into your feet wow just blows my mind all the bare feet and all those shavings
All you commentators thank you for your concerns however Pakistan is a poor country and striving to join the big boys in its quest to better the lot of its people. 😢his country makes fighter jets to cement plants sugar mills surgical instruments soccer balls for the whole world besides autos cars and a host of other things. So this is slowly changing as the West did not have all the rules laws in place for at least a 100 years! Happy New Year!
They were individually boxing those for retail. I'd be shocked if Honda had any connection to this except the part they copied on day one had the word Honda written on it.
А есть ещё те, кто торгуется при покупке вещей из Пакистана. Опомнитесь, в каждой вещи цена одной жизни пакистанца, без преувеличений. Одним днём живут люди.
Suggestion, please use appropriate safety protective equipment
Maybe everyone could come together and get these guys some face shields
Love all the safety equipment.
That boy doing the spray paint should be wearing an N-95 mask.
At least one Covid mask.
😂😂 he takes breathe this paint spray powder, instead of oxygen.
Alli parece que la salud no importa
I noticed in these countries in all the factories no matter what they toss everything on the ground instead of putting it in containers so it can be easily moved around. They toss it in the dirt then sombody comes along and picks it up again and puts it into a bag or some other container. I watched a recycle vid they have these huge bags of pop bottles and just dump it in the dirt and scatter it all over hell then the workers go through it and pick it off the ground very weird . They wont use conveyor belts either the worker will fill what ever bucket he has walk climb stairs dump the bucket into the machine go back to the pile on the ground and pick it all up by hand and start the process all over walk back and forth climb stairs n dump really weird
Молодой парень на порошковой покраске, даже без повязки, не говоря уж о рейсператоре.
Лёгкие выплюнет лет в 30... 35, если доживёт.
Не надо так!
The extractor fan in the wall of the aluminium buffing process shed is a good start. Why not use ducting from the fan to each wheel. ?.That would take out far more dust and keep the area cleaner. Aluminium dust is very bad when breathed in.
Thank GOD for working people.
They take better care of the machines then themselves
This makes "Modern Times" (1936) look like a major improvement in terms of health and safety
Instead of throwing the parts on the floor, would it not be more economical and efficient to put them in some kind of container/bin?
It's a religion thing.
When allah was born, his mom did the same.
You beat me to it. It seems that is the norm in everything that they make. Everything is a mess no matter what they make. Work smarter not harder, but obviously doesn't apply in Pakistan.
That's what I was going to say
Hmmmmmm...........Breathing in all that powder coat powder?
So sad, OSHA would shut that factory down in a New York second. That kid doing the powder coating will probably die of lung disease before he is 50.
So in every western country.
O cara da pintura deve ter só mais uns 2 anos de vida pela frente.
Cara, pensei a mesma coisa, aquele tipo de tinta é altamente cancerígena. Tá louco.
Amazing work
Amazing work.
AMEI ESSE VÍDEO ESTÃO TODOS DE PARABÉNS
They need to wear dust mask
Garbage in, garbage out.
Con solo una caja de 1000 máscaras podrían evitar muchas enfermedades futuras es algo tan sencillo y barato no entiendo.
8:45 - надпись на коробке: "для вскрытия коробки не использовать мачете". Сурово!
Why do they always throw them to the ground. Don't they like to use crates. But kudos for their work.
Are they produce the machine blok under the licence of HONDA company? Bravo
I thought the same thing. Probably fake licence.
Not only Honda there are other manufacturer also could be any one.
It looks like unlicensed after market parts that can be sold for a fraction of what genuine parts would cost
FUNK FPV might like this video.
La empresa honda les paga una fortuna por hacer partes 😅😅😅
How about heavy duty tipable boxes on stands and with castors and clear level pathways for product to move on? All the double handling would be solved
اكن كل التقدير والاحترام لهؤلاء الناس العمال انهم يكدون و يتعبون كي لا يسقطوا تحت رحمة الغرب الصهيوني الشيطاني عندما تكون تنتج ملتزماتك يحترمك الجميع ولا احد يستطيع التطاول عليك
شكرا لكم ايها الابطال المثابرون
The only thing that separates the brake levers from $150 levers is the guy with the drill press that just wallers the heck out of the cast hole instead of precisely drilling through the parts. All the rest of that work is a waste because they'd be worth several times more if they improved that step.
It is better if you mention place of manufacturing
Pakistan
Hơn Việt Nam nhiều.
جزاک اللہ
En este siglo en que estamos es una vergüenza ver seres humanos trabajando en esas condiciones y más niños no sé cuál es el índice de mortalidad en Pakistán por enfermedades pulmonares pero no debe estar bajo.pero tienen que aserlo para sobrevivir.muy triste.
If you look at the machinery there is no maintenance they dont clean it they dont even grease it . If you look at the one machine it has grease zerks on it and its bone dry the ram is bone dry never been greased. This equipment must be WW II surplus there is no way a new machine would take this kind of abuse . Bare feet around all those shavings and metal to shove into your feet wow just blows my mind all the bare feet and all those shavings
Why would you polish the metal then paint it WTF ? Now that is weird wow what a waste of time and man power and materials
If you make any money from these videos please buy these kids masks!
Why? They'll just be on phones scamming gift cards from the elderly in other countries anyway.
Nivel de seguridad para los trabajadores nulo,y todos en chanclas y sin mascarilla para la pintura en polvo
ہر چیز کو نیچے زمین پر نہ پھینکا کرو بلکہ کسی ٹرے یا کسی باکس میں ڈالو ۔ اسے اُٹھانا آسان ہو گا ۔
Injection moulding plastic would be cheaper and better
Plastic break handles? Nope
plastic brake levers are not a good idea
Nowhere in my comment did I mention plastic , metals can and are injection moulded @@TheJiminiflix
No wonder motorcyclists are dying in Pakistan like flies.
You can not make such comments without survey. Come to Pakistan see n comment.
All you commentators thank you for your concerns however Pakistan is a poor country and striving to join the big boys in its quest to better the lot of its people. 😢his country makes fighter jets to cement plants sugar mills surgical instruments soccer balls for the whole world besides autos cars and a host of other things. So this is slowly changing as the West did not have all the rules laws in place for at least a 100 years!
Happy New Year!
HONDA third party products
They were individually boxing those for retail. I'd be shocked if Honda had any connection to this except the part they copied on day one had the word Honda written on it.
Replacement parts copied from genuine ones.
Кустарные артели, производство на коленке....,такое происходит когда в государстве нет экономической политики.а людям нужно хоть как-то выживать
А есть ещё те, кто торгуется при покупке вещей из Пакистана. Опомнитесь, в каждой вещи цена одной жизни пакистанца, без преувеличений.
Одним днём живут люди.
Any one have contact number this factory