@@JasonMorrisphotocinema i feel that many people get confused on paying more $$ = more epic shots. Just have to master your tools and work with what you got. Diy trinty is hyped for most but only a few can really operate that style of shooting. I almost bought the float but after watching your video and bestboy adam i felt that theres no point in justifying anything more than $500 for the attatchments. Just work smarter and save more.
Why did you decide to hold and control the sled by the bottom end of the rig? I have a Glidecam and when you handle the sled at any position other than near the gimbal, you risk inducing movement into the camera mount end. Touching the sled only near the center of balance allows the balance arms to do their job and absorb footsteps and vibrations. When you hold the sled near the bottom, you transfer a lot of movement from your body to the sled. Of course, the electronic gimbal will remove a lot of movement on its own, but the whole reason for using a steadicam-type of rig is to remove footsteps from your footage.
Awesome video. Couple of questions, how did you find the results on the Z axis compared to gimbal alone? And does the vlock mount run power through the monopod arm or are the cables just loose?
G'day mate...very good video n preview..is digitalfoto kind enough to tell u to keep it after ur review?I like the previous video with the glide too...luv to but either one of those gimbal support..if u not keep it,r u planning to sell it private soon?I can order it online but with what happening around the world,it make the delivery impossible come in time n will take ages..would be handy if u sell it as we both in qld..thanks mate
Hello, I'm going to buy the Thanos 2 and also the Ronin RS4 but I'm not sure whether to buy the pro or the common one. I use an a7s3 with cage and lens and it weighs around 2.5 kilos. But maybe it's better to have the project than leftovers. You who think it's better. Thank you so much. On the other hand, when you have to rotate the camera, what do you do if you don't reach the gimbal joistick?
THANKS FOR THE VIDEO.. I buy this but I need help, I have balanced everything perfectly, both the gymbal and the thanos, but my gymbal vibrates when I use the thanos, can you know what is happening?
Hey great video! I have a similar setup with the zhiyun crane 3s and fx6 and I really love it so far. Question tho. What are the tools you're using to adjusting the arm.? Did they come with your kit? I had the 1st gen Thanos pro and just upgraded the arm, yoke and trinipod. Thanks.
It actually can. I tried it with URSA 12K + Irix 15mm and 45mm cine lenses with the V-mount battery still attached to the camera (we couldn't get an xlr to V-mount cable) and it all balanced a Crane 3S with the Thanos Pro 2, no problem.
@@darkyagami4139 hey how is it going the the ursa 12k. My thanos ii comes in this weekend I’m nervous as I have the dzo Pictor, ursa, matte box, battery, wires , and cage plates, monitor mounted with a arm. Any advice and do you think I will be good???
What other budget options for the arri trinity are there, ive been looking all over the place… I definitely need one of these for my next film that were shooting…
Hey Jason - another quick question if I may: Is the Adjustment Tool available separately? It's not on the "in the box" list for the rig I'm considering for my DJI Ronin-S. I'd really like to have that puppy! Any advice is greatly appreciated! TIA!
Yo. Thanks for these videos. I have an S1H & Crane 3s. I'm looking to get one of these vest things so that my camera man doesn't die from exhaustion. And while I CAN afford the Thanos PRO II the GlideGear is less than half the price (and I'm very not rich). So I'm wondering if the Thanos PRO II is worth the extra 800 dollars and if so, why? Thanks again!
why is everybody showing a black item in front of a black shirt in an almost black room??? wouldn't it be better to show something black in a less dark environment or at least wear brighter clothing?
How is the attachment point between the Crane 3s and the Thanos? Is it just the one bolt thread holding everything together? That's been my main concern with seeing setups like this, that's a lot of weight being leveraged at that one connection point. Have you noticed anything there? Maybe its nothing to worry about at all?
the connection point seems to be solid. I personally am not worries about it as it seems to be built quite well. I definitely would assume the arri trinity is built with the best materials so it is hard to beat but for the price digitalfoto have done an exceptional job
Just got my TPII. It's not clear whether it needs to be balanced both horizontally and vertically. I can get it perfect horizontally but if the aim is to have the gimbal turn back to the centre horizontally this then puts it out vertically. Any suggestions? Thanks.
I went with a similar setup and a "budget" model (whom I dont want to advertise here). But I just wanted to say that for whichever system you go with, ANY vest setup with a gimble and the 6k PRO is a MUST.. ESPECIALLY when im using non IS lenses. made my shots usable and beautiful (gave up most handheld shots with non IS lenses-rolling shutter nightmare). and WITH IS lenses, shots look like crane shots. so glad I did it. cheaper vests can be a bit hot with all the padding though. but I originally bought it JUST to mount the camera without the gimble because I didnt you I could even break off the handle on the Rs2. once I got the power base and mounted it changed my world. Not something you'd want to fly with on a plane, but for sure out in the field its amazing.
if you have a red ranger gemini, what steadicam should i use because arri trinity is just to expensive, more expensive than the camera in my case lol ?
Do not buy the thanos pro 2, there is no way to balance the arm because there is nothing to adjust in the part where the arm connect to the vest and therefore you will never be able to have the entire system balanced. You are suppose to release the arm and it shouldnt go forwards or backwards, or left or right, but this is only possible with vest and arms that has adjusment knobs in the part the arm connects to the vest, the thanos pro 2 doesnt have it. So you will never be able to balance it. This guy must probably accepted the 20% money return that digital foto offers you if you do a video showing this equipment in a positive way even if it doesnt work. I refused that and asked them for a refund and returned and they didnt want it, I actually beg them and Lydia didnt give a damn. Dont buy this thing from then, all they want and do , is to make a sell, you are warned.
![⚔️จำกัดเวลา⚔️ [พากย์ไทย] ซอร์ดอาร์ตออนไลน์ ซีซั่น 1 - ฉบับมัดรวมทุกตอน](http://i.ytimg.com/vi/ohkfBVDXLSA/mqdefault.jpg)
Perfectly balanced as all things should be.
I see what you did there
Really enjoying all your videos, Jason! Watching all your stuff about DigitalFoto rigs, the Thanos-Pro II seems like the way to go for my FX3!
The Crane 3s and steadicam set up he has is the same I have with my Eva1 and S1H. I fly the S1H more now. Dope!
nice nice!
I actually bought the g2g 505 stabilizer after watching your other video. Got it paired with my rs2 and bmpcc6k with xeen 24mm t1.5
What are your thoughts? Definitely much much cheaper than this one
@@JasonMorrisphotocinema love it shooting with it right now with my wife
@@JasonMorrisphotocinema i feel that many people get confused on paying more $$ = more epic shots. Just have to master your tools and work with what you got. Diy trinty is hyped for most but only a few can really operate that style of shooting. I almost bought the float but after watching your video and bestboy adam i felt that theres no point in justifying anything more than $500 for the attatchments. Just work smarter and save more.
Why did you decide to hold and control the sled by the bottom end of the rig? I have a Glidecam and when you handle the sled at any position other than near the gimbal, you risk inducing movement into the camera mount end. Touching the sled only near the center of balance allows the balance arms to do their job and absorb footsteps and vibrations. When you hold the sled near the bottom, you transfer a lot of movement from your body to the sled. Of course, the electronic gimbal will remove a lot of movement on its own, but the whole reason for using a steadicam-type of rig is to remove footsteps from your footage.
because thats the beauty of having a setup like this, getting shots from any angle. a solid fitting gimble shouldn't matter where you control it from.
Awesome video.
Couple of questions, how did you find the results on the Z axis compared to gimbal alone? And does the vlock mount run power through the monopod arm or are the cables just loose?
perfectly balanced in every way
So awesome!!
If this is the THANSO PRO II, Cant wait till they release the "DARKSEID" CUT
G'day mate...very good video n preview..is digitalfoto kind enough to tell u to keep it after ur review?I like the previous video with the glide too...luv to but either one of those gimbal support..if u not keep it,r u planning to sell it private soon?I can order it online but with what happening around the world,it make the delivery impossible come in time n will take ages..would be handy if u sell it as we both in qld..thanks mate
Epic rig.. epic actress 😆😍👌
😂😂😂
Hello, I'm going to buy the Thanos 2 and also the Ronin RS4 but I'm not sure whether to buy the pro or the common one. I use an a7s3 with cage and lens and it weighs around 2.5 kilos. But maybe it's better to have the project than leftovers. You who think it's better. Thank you so much. On the other hand, when you have to rotate the camera, what do you do if you don't reach the gimbal joistick?
I’m thinking about getting this. I shoot with the Z Cam with a DZO 20-55 lens. What is the payload for this system?
THANKS FOR THE VIDEO.. I buy this but I need help, I have balanced everything perfectly, both the gymbal and the thanos, but my gymbal vibrates when I use the thanos, can you know what is happening?
Which one do you think it is better< the Thanos Pro II or Tilta Float?
nice actually how secure is the connection to the thanos ? is tthere anyway make it more secure?
Does it include the npf to vmount adapter in the package? Or you just buy one and that will work?
Hello. Do you know if it has any limit in the size operator?
I have a red epic dragon, atlas anamorphics and a crane 3s pro. Do you think the thanos can take that? 🥶
Wondering how this compares to the tilta float
Tilta float is built better
Hey great video! I have a similar setup with the zhiyun crane 3s and fx6 and I really love it so far. Question tho. What are the tools you're using to adjusting the arm.? Did they come with your kit? I had the 1st gen Thanos pro and just upgraded the arm, yoke and trinipod. Thanks.
This tool comes with the Thanos Pro II. Makes things much easier to adjust
@@JasonMorrisphotocinema ok cool. Thanks for letting me know. 👍🏾🙏🏾🙌🏾💯
tnx guy
is it comparable to the tilta float?
this thin need focus pulling or wheel on near monitor
excellent setup... I wonder if this could take on the Blackmagic 12k camera?
It is rated up to 10k. So depends on the lens and accessories but it could potentially handle it
It actually can. I tried it with URSA 12K + Irix 15mm and 45mm cine lenses with the V-mount battery still attached to the camera (we couldn't get an xlr to V-mount cable) and it all balanced a Crane 3S with the Thanos Pro 2, no problem.
@@darkyagami4139 Good to hear... thanks!
@@darkyagami4139 hey how is it going the the ursa 12k. My thanos ii comes in this weekend I’m nervous as I have the dzo Pictor, ursa, matte box, battery, wires , and cage plates, monitor mounted with a arm. Any advice and do you think I will be good???
Is it true that the gimbals is only connect to the Thanos steadycam only by one single screw? That would really 😟
Good budget rig
Its awesome Mario!
This vs the Tilta Float, any input?
Nice video. Can't this rig be used with normal camera rig, with out using any gimbal on the thanos pro 2. Thank you
Yes it can. It can be used like a steadicam
@@JasonMorrisphotocinema thank you
What other budget options for the arri trinity are there, ive been looking all over the place… I definitely need one of these for my next film that were shooting…
came tv has their version which seems to be pretty good. I do like the build of the digitalfoto rig
Yo I have one just like this available, brand new hmu with best offer!!!!
Does the metal part in front of your chest hurt?
Hey Jason - another quick question if I may: Is the Adjustment Tool available separately? It's not on the "in the box" list for the rig I'm considering for my DJI Ronin-S. I'd really like to have that puppy! Any advice is greatly appreciated! TIA!
HI Don do you mean arm tension key or monopod balance adjusting rail kit? Both are included in the package now of THANOS-PROII
If you don't want to use the monopod for some shoots, is it possible to shoot without it?
Hi. Nice video, but how to control the camera tilt?
I have the same setup. We have to buy wireless controller of zhiyun? But it's works only with its video sender wich is not good(
I only had on tilt lock. Can't control the tilt unless you have that wireless controller
@@JasonMorrisphotocinema its possible by phone, but not so good
Any balancing tutorials?
I may create a full balancing tutorial in the near future as I have has plenty of requests to do so. Stay tuned
Yo. Thanks for these videos. I have an S1H & Crane 3s. I'm looking to get one of these vest things so that my camera man doesn't die from exhaustion. And while I CAN afford the Thanos PRO II the GlideGear is less than half the price (and I'm very not rich). So I'm wondering if the Thanos PRO II is worth the extra 800 dollars and if so, why? Thanks again!
GLIDEGEAR`s aluminum material make system heavier and stable function,mounting function is not as good as DF THANOS-PROII
I’m selling one, brand new and not used, just taken out of the box, hmu with best offer!
why is everybody showing a black item in front of a black shirt in an almost black room??? wouldn't it be better to show something black in a less dark environment or at least wear brighter clothing?
How is the attachment point between the Crane 3s and the Thanos? Is it just the one bolt thread holding everything together? That's been my main concern with seeing setups like this, that's a lot of weight being leveraged at that one connection point. Have you noticed anything there? Maybe its nothing to worry about at all?
the connection point seems to be solid. I personally am not worries about it as it seems to be built quite well. I definitely would assume the arri trinity is built with the best materials so it is hard to beat but for the price digitalfoto have done an exceptional job
@@JasonMorrisphotocinema Excellent, that makes me feel a lot better about possibly investing in this setup! thank you for the response.
Does it have single op focus control?
Just got my TPII. It's not clear whether it needs to be balanced both horizontally and vertically. I can get it perfect horizontally but if the aim is to have the gimbal turn back to the centre horizontally this then puts it out vertically. Any suggestions? Thanks.
If you find a tutorial in English, hit me.
I will see if i have time to make this tutorial. a lot of people are asking
5:51 who does that?
drink out of cups with nothing in them? ha ha
do you think this will work with heavy setup as DJIRS2 WITH BLACKMAGIC 6KPRO AND MATT BOX ?
Most definitely
I went with a similar setup and a "budget" model (whom I dont want to advertise here). But I just wanted to say that for whichever system you go with, ANY vest setup with a gimble and the 6k PRO is a MUST.. ESPECIALLY when im using non IS lenses. made my shots usable and beautiful (gave up most handheld shots with non IS lenses-rolling shutter nightmare). and WITH IS lenses, shots look like crane shots. so glad I did it. cheaper vests can be a bit hot with all the padding though. but I originally bought it JUST to mount the camera without the gimble because I didnt you I could even break off the handle on the Rs2. once I got the power base and mounted it changed my world. Not something you'd want to fly with on a plane, but for sure out in the field its amazing.
if you have a red ranger gemini, what steadicam should i use because arri trinity is just to expensive, more expensive than the camera in my case lol ?
Get your clients to budget for a steadicam operator on shoots then it’s free for you
@@allyoliver5760 this
@SaxqueSam
Trying to sell mine, brand new still in the box never used!! Hmu with offer
How come?
Do not buy the thanos pro 2, there is no way to balance the arm because there is nothing to adjust in the part where the arm connect to the vest and therefore you will never be able to have the entire system balanced. You are suppose to release the arm and it shouldnt go forwards or backwards, or left or right, but this is only possible with vest and arms that has adjusment knobs in the part the arm connects to the vest, the thanos pro 2 doesnt have it. So you will never be able to balance it. This guy must probably accepted the 20% money return that digital foto offers you if you do a video showing this equipment in a positive way even if it doesnt work. I refused that and asked them for a refund and returned and they didnt want it, I actually beg them and Lydia didnt give a damn. Dont buy this thing from then, all they want and do , is to make a sell, you are warned.
huh