HP m402 m403 m426 m427 maintenance kit fuser rm2-5399 kit replacment instructions.
ฝัง
- เผยแพร่เมื่อ 29 ก.ย. 2024
- How to replace the HP m402 m403 m426 m427 maintenance kit fuser rm2-5399 kit instructions.
Shop
www.metrofuser...
Today we will be reviewing the removal and installation process for the HP M402 M403 M426 M427 Fuser and Maintenance Kit RM2-5399-Kit
Start by making sure the printer is off for at least 15 minutes and unplugged. Approach the printer from the rear and open the rear door.
Repair Notes
There is no Page count Reset for these models.
80,000 page yield
Kit Contents:
RM2-5399 Fusing Assembly
RL2-0656 MP Roller
RL2-0657 Separation Pad
RM1-4023 Transfer Roller Assembly
RM2-5397 Separation Roller Assembly
RM2-5452 Pickup Roller Assembly
This fuser and kit is available at in an number of different options at metrofuser
Thanks for watching. If you would like to see more of these videos hit like and subscribe..Visit on Metrofuser's TH-cam channel or www.metrofuser.com.
Metrofuser is a leading global innovator, manufacturer of printer parts, equipment, diagnostics, repair information and systems solutions for professional users performing critical tasks. Products and services include hp printer parts, printers and printer repair training. Parts include hp printer parts such as printer fusers, printer maintenance kits and other hp printer replacement parts. The company's, customers include office equipment dealerships, online retailers, repair centers and MPS service providers nationwide. Metrofuser has been named to Inc. Magazine’s fastest growing companies five consecutive years. Visit us at www.metrofuser...
At 4:10 it shows just pulling the back panel off which isn't the case for the 402 I just serviced. It's connected to a black plastic assembly along the bottom that needs to be unhooked from the printer first. Flip the printer onto it's front and unclip it at the bottom center, then the two pieces flip toward you and up. This video was really confusing until I figured that out.
This comment saved my ass, thank you
I just like the ones where everything comes out the front or side, no disassembly required!
MY PAPER HOLDER WONT CLOSE ALL THE WAY ON THIS PRINTER i
Just what I needed for a service call: clear, concise, and to the point. Another video on this topic seemed to gloss over things, but you covered each step, which I appreciate.
Heads up: the side guards can be a pain to wrestle, and the black plastic cord cover needs to have a specific orientation.
Thanks for the breakdown info. We had a transparent page get wrapped around the fusion roller. We’re back in business now.
When printing on hp404 the toner is not fixed on paper or it is wiped out soon what shall I do
Can you explain me, why the fuser is very loud after replacing, the prunter getting some vibrations tried with many fusers
Dear friend, price of this maintenance kit? thank you
Your video having excellent nugget of information I have been using HP M 403 over six months 60 k pages completed no complaints has been found so far. Before this i used canon lbp 6300 which churned out 290k pages in 3 years.
Can’t get the one roller to move to right side. How????
Great video but it's missing some huge points - the one I will mention is that when you place the fuser back in, on the bottom left there is a gray plastic protrusion and on the printer there is a gray lever. They MUST line up or you'll get paper jams. Most of this video you can watch without commentary, but how that gets glossed over is a bit frustrating. When I watched this for the first time, I knew that handle was important so I stopped immediately to find out what it did. But thanks for making a video.
Thanks a bunch for this. This should be pinned to the top lol
Good video. Please, What is the life cycle of the maintenance kit fuser ? I didn´t find it in the service manual or bulletin service. Thanks
I had to smack the hell outta the side panels to get them back on.
Excellent information. Great job!
Ok
Thanks, looking at getting a new fuser for this model of printer and HP is no help at all re: guides at replacing the fuser. Of course we may just end up purchasing a new printer, depends on the cost of parts vs a new one, as always
Ty
Great job mate👍🏻 i fix my hp m404n in no time thanks to you👍🏻 keep up the good work
Hp 2015 duplex paper jam solutions
Somebody at HP needs a good, old fashion trip to the wood shed for designing those covers like that.
I see you removing parts and then putting them back in.....are these new parts or the same old parts? There is no explanation as to what your doing. Also, giving the part name as your removing/replacing them would have been more helpful.
Excellent Video, appreciate the guidance as always.
Thank you!
this is very helpful thank you.
Glad it was helpful!
Excellent
Awesome video
Thank you
your welcome
@@metrofuser
Sir please tell to do service of Hp laserjet pro printer
M403d.
Full Service
one on one part service
Sir Please
Thank you
Thank you, KING
your welcome
this was helpful, thanks!
Glad it was helpful!
This is great information, Thank you!
Now u r best eng😂
Video stuck after playing two minutes
MFP M426fdn in our facility is printing all pages fading out to very light print on the right side of the page. Brand new HP cartridge installed didn't help. Can this help?
Hey Ralph Clean the laser scanner lens, there is probably toner on one side of the lens.
I have a HP M402n that is giving me a "Jam in Cartridge Area open door and clear jam" after some searching online some people were saying unplug it and turn it upside down oddly enough to clear the message. That works occasionally, then after I try to print the paper gets stuck in the exact same spot and I'm back to the error message. I have tried a new cartridge and it also did nothing. The printer is fairly new, everything inside is in almost new condition. Any help would be greatly appreciated.
Sounds like you probably lost a spring on a sensor. When u flip the machine over u are allowing the sensor arm to return to home (the spring should be returning it to home position)
Looks complicated.
How did you take the transfer roller out?! I see you did something on the left side to the white clip. I am trying to replace it currently and cannot release it.
there should be a blue plastic release tang on the right side of the roller - left side just sticks into a black plastic holder
Can you give me a diagram of the hp m402 machine (with color)?
nice
nice video
Thanks 👍🏽
not suppose to touch new transfer roller with out gloves on
That is correct..Thanks for pointing it out!
@@metrofuser great video otherwise
U must be see dani Danial s video u got that
Thank you so much
You're most welcome