Those are RunCam Link antennas. Any 5.8ghz LHCP antennas with the IPEX connector should work. In theory better then the dual band antenna it comes with, but I've never tested it.
Sorry, not sure. The 3d printed parts are the hatch latch, the motor mounts and the antenna mounts. The power module for the Caddx Peanut is also sticking out the right size from the hatch.
Will it do a spin like that while climbing?, is is 'falling leaf' the only option? And where are you getting the funking music for the last few vids? It matches the flights so well.
Now put 3d props on and set the esc's for 3d and now you got even more spin, braking and reverse flight. I wonder what caused the servo to fail, if it was a brown out you would see it, maybe a sticky control rod or a bad servo.
@@RickyGode Differential thrust will not help wag at all in Inav unfortunately. iNav doesn't do yaw stabilization in most flight modes. I disable yaw stabilization when using differential throttle or any rudder control in iNav.
Would you share your pid values? I just get a t1 ranger and I find my roll is either too sluggish or has lots of bounceback for quick roll inputs. Whats your experience with that?
This T1 is currently retired and the FC has been put into something else. Have you run autotune? It generally does a pretty good job. Then you can use inflight adjustments if you have some channels to spare.
Not sure. At this point I'll be replacing it. There doesn't seem to be any notable. Servo still works on the bench. No issue with wiring that I can see.
Frustrating I bet. thank you for letting us ride along.although there are other people doing proximity FPV on TH-cam I like yours the best because I also live out in the country with tractors and trucks and farm equipment and get to watch you do what I wish I was doing lol.
You do a great job on these edits.
Awesome flight video some of my favorite keep up the good work thanks for sharing 👍 cheers
Could the atomrc penguin do flatspins too?
nice flight. too bad about the crash!
Love the video what antennas on the 03 mate ?? Cheers
Those are RunCam Link antennas. Any 5.8ghz LHCP antennas with the IPEX connector should work. In theory better then the dual band antenna it comes with, but I've never tested it.
Whats the red thing out the right side of your ranger, i saw it on a 3d printables site??
Sorry, not sure. The 3d printed parts are the hatch latch, the motor mounts and the antenna mounts. The power module for the Caddx Peanut is also sticking out the right size from the hatch.
Will it do a spin like that while climbing?, is is 'falling leaf' the only option?
And where are you getting the funking music for the last few vids? It matches the flights so well.
I can't see any way it could climb while spinning like that. I get my music from uppbeat.io.
Now put 3d props on and set the esc's for 3d and now you got even more spin, braking and reverse flight. I wonder what caused the servo to fail, if it was a brown out you would see it, maybe a sticky control rod or a bad servo.
Are you running inav? What are your differential thrust settings?
Yep, I have a 0.4 yaw differential setup.
@@NotamedClosed Thanks! I’d like to stabilize the “wag” but my TH-cam research has led to recommendations to leave off differential thrust.
@@RickyGode Differential thrust will not help wag at all in Inav unfortunately. iNav doesn't do yaw stabilization in most flight modes. I disable yaw stabilization when using differential throttle or any rudder control in iNav.
Would you share your pid values? I just get a t1 ranger and I find my roll is either too sluggish or has lots of bounceback for quick roll inputs. Whats your experience with that?
This T1 is currently retired and the FC has been put into something else. Have you run autotune? It generally does a pretty good job. Then you can use inflight adjustments if you have some channels to spare.
Sad to see that
The rudder orthoraty is pretty bad needs a bigger one 😂
servo failure?
Not sure. At this point I'll be replacing it. There doesn't seem to be any notable. Servo still works on the bench. No issue with wiring that I can see.
Frustrating I bet. thank you for letting us ride along.although there are other people doing proximity FPV on TH-cam I like yours the best because I also live out in the country with tractors and trucks and farm equipment and get to watch you do what I wish I was doing lol.
@@markschmidt6737 Thanks! Sounds like you need to get a few FPV wings!
N1 ;-)