Thank you very much for all the information and I would like to know where I can find the pressure settings for auxiliary gas according to thickness and type of material to determine the cutting speed. Thankyou so much for the videos . They are helpful.
Is it possible to cut 12mm with nitrogen without the criogenic dewar tank and the vaporizer set? just a normal compressed nitrogen cilinder? my cilinder is 9mt3 (9000L) how can i know how many time will last with the 1.5mpa pressure ?
Good morning, I operated a 3 kw laser cnc, which I have to keep the auxiliary oxygen gas open when cutting with nitrogen because it throws an alarm of low oxygen pressure, check for leaks and I have not, but I have observed that in cutting with stainless steel having Oxygen pressure at the outlet so that it is not present, this alarm decreases pressure little by little and the brown color cuts me, do you mean that the nitrogen is contaminated with oxygen, has this happened to someone, please? what to do
@@ClaraChai Blessed day, Miss Clara, I really don't know where I'm from. With the figure, you'll have a video to show you how to do it, thank you very much for your information
Thank you very much for all the information and I would like to know where I can find the pressure settings for auxiliary gas according to thickness and type of material to determine the cutting speed. Thankyou so much for the videos . They are helpful.
First your machine should have the proportional valve, normally it is for the oxygen only.
Thanks 🙏
Is it possible to cut 12mm with nitrogen without the criogenic dewar tank and the vaporizer set? just a normal compressed nitrogen cilinder? my cilinder is 9mt3 (9000L) how can i know how many time will last with the 1.5mpa pressure ?
the gas purity is highly required.
Hola me puedes ayudar con parámetros para un laser de 1500 w usando aire de compresor, cortando acero al carbono y acero inoxidable
You can check my video, cutting parameters, thanks
thank you
So welcome!
Good morning, I operated a 3 kw laser cnc, which I have to keep the auxiliary oxygen gas open when cutting with nitrogen because it throws an alarm of low oxygen pressure, check for leaks and I have not, but I have observed that in cutting with stainless steel having Oxygen pressure at the outlet so that it is not present, this alarm decreases pressure little by little and the brown color cuts me, do you mean that the nitrogen is contaminated with oxygen, has this happened to someone, please? what to do
Did you set the gas delay?
@@ClaraChai Blessed day, Miss Clara, I really don't know where I'm from. With the figure, you'll have a video to show you how to do it, thank you very much for your information
@@gilbertochirinos9972 I know how to do it? I do know what I am doing.😁😅
@@ClaraChai Yes I know, I have seen all your videos, and the one in Spanish, can you help me, in what parameters of cypcut, can I change it, ????
@@gilbertochirinos9972 I need more information, talk to me on WhatsApp +86-13335151833
Could you give information about the filters used in air and auxiliary gases? Can you tell us about the air filters?
Thank you