Glad you liked the video. My pleasure 🤗 I know that some of my content is focused for Indian users, I do try to create content that is useful for users from any place. If possible do subscribe ☺
Hi, great video, very informative! I saw you already commented on the sturdiness of the desk, but if you would be so kind, I'd like to ask if you could comment if you notice any wobble if you were to use the desk to write by hand or draw for instance?
Hi... Glad you liked the video. I did not face any wobble in using it for writing or such activities. The adjustable stoppers at the bottom with wide area helps to keep the table firm in place without any wobble. The only possibility of wobble is when the screws during installation are not tightened well. Otherwise even with multiple position changing done in my house with the table, there is no issue of wobble. Hope this helps.
Congratulations on the purchase, as I mentioned in the video you can use the cross bars/frame under the grill to fix the monitor arm. It's very sturdy.
@@IAmGizmogeek thinking of getting the motorized one.. the electric underframe, not the manual one though... You're talking about the underframe right?
Hi my PC is like 10kg ,if i put it on the table will it shake or become unstable? since uou pur your PC on the table too. Will it shake after you put the pc on top lf the desk?
The table is very sturdy and doesn't shake even with heavy weight... 10kg should be manageable but keep it towards the end where the metal grill is there so that the load on Particle board is less
Redgear ka keyboard kab se use kar rahe ho ? Any problem from keyboard that you faced.i am planning to buy one and any suggestion from you for keyboard under 2000 for full day use?
Hi... Ek saal hogaya leke, no issues till now. As ye mera first mechanical keyboard hain, thoda time laga use to hone ke liye and typing speed pakadne. Personally typing jyada hoga toh I would prefer a membrane keyboard for full day use, but agar mechanical hi chahiye toh this redgear one is amazing. You can buy it.
Hi bro, great video, I'm planning to buy the same table from the store but not sure if it will fit in my i10 (old model). Can you please confirm if this will fit in my car or not. Thanks in advanced 🙌🏻
@@SanketKulkarni hi... Glad you liked the video. And regarding the transport... I doubt it would fit in old i10 as it's smaller than Baleno that I used. After fitting it in Baleno (new one) I had to almost sit with chest touching the steering whole driving. Would suggest to borrow a bigger car from a friend if possible for the shopping day.
bro nice and clean setup ❤ i know what it takes to clean everything . i want know which power extension you are using because u have lots of stuff on u r desk and they all are glowing 😆and i want to know socket amp (power extension socket) please reply asap and thank you
Thank you so much... Glad you like the arrangement.. It was messy earlier with 2 monitors and me placing CPU on the desk directly... Did some rearrangements to have more free space.
Hi, can i please know the type of your case or at least the dimension of the case? I am planning to put my PC case in the metal mesh but all cases dimensions are different i am afraid it wont fit Thank you beforehand.
@@DiNusaOfficial Hi.. This is the one I am using.. You can check the dimensions www.pcstudio.in/product/deepcool-matrexx-55-mesh-v4-c-argb-atx-mid-tower-cabinet-black/?srsltid=AfmBOorV-eV88uk_yullovmOEZ_KJLgeY4oqv9pzMRsD9IUOacCUAxXH
Initially I thought the same too but if you actually see the metal part it is super strong and can easily take the weight of multiple monitors. There's enough space too to give the arm a proper grip.
I have this desk as i also got it last year and have a dual monitor arm holding up up two 27" in LG Monitors and even had two 31.5" HP Monitors so the back of the desk does hold up well. I even bought a metal plate from Amazon 10"x6" to put under the monitor arm base for more stability and peace of mind. My purchase came with 2 plates so i have another underneath for the clamp on the monitor arm base.
can you post link of wallpaper you are using?
Here you go www.uhdpaper.com/2022/11/window-balcony-scenery-digital-4k-4470h.html?m=0
Thank you for sharing such a detailed explanation of the setup.
Looks wonderful!
Thank you and glad you liked it... Do subscribe for more such interesting content 😊
o con la cámara
What measurement is there between the legs of the desk and the edge of it?
Hi... Between legs of the desk is 124cm from inside of legs and 132cm from outside of leg. Edge to edge length of top plank is 160 cm.
Thank you for detailed review brother, very practical information that I could not get anywhere else. Hello from Slovakia!
Glad you liked the video. My pleasure 🤗 I know that some of my content is focused for Indian users, I do try to create content that is useful for users from any place. If possible do subscribe ☺
Hi, great video, very informative! I saw you already commented on the sturdiness of the desk, but if you would be so kind, I'd like to ask if you could comment if you notice any wobble if you were to use the desk to write by hand or draw for instance?
Hi... Glad you liked the video. I did not face any wobble in using it for writing or such activities. The adjustable stoppers at the bottom with wide area helps to keep the table firm in place without any wobble. The only possibility of wobble is when the screws during installation are not tightened well. Otherwise even with multiple position changing done in my house with the table, there is no issue of wobble. Hope this helps.
Hi! Could that metal part hold 3 27’ monitors? Or that’s too heavy?
@@Stryker4Real hi... I think k it can easily take the weight of 3 27" monitors if properly spread across.
Ordered this one today and confused now How can I fix my monitor ergo arm in that grill?
Congratulations on the purchase, as I mentioned in the video you can use the cross bars/frame under the grill to fix the monitor arm. It's very sturdy.
Bro... Looking for Utespelare Table top exactly like this with electric height adjustable underframe?
Is there any option to do that?
Unfortunately no. Utespelare Table top is not available separately. You have to go with the Sit/stand models in IKEA
@@IAmGizmogeek Yeah, thinking of getting the trotten table top (160x80) with Jin office single motor height adjustable underframe... Will be good?
@@satishranjanrout3579 That's good... Down side is no black and the height is manually adjusted with the handle and not by a button
@@satishranjanrout3579 This one's a better deal.. you should look out
amzn.to/4cey6Jh
@@IAmGizmogeek thinking of getting the motorized one.. the electric underframe, not the manual one though... You're talking about the underframe right?
Hi my PC is like 10kg ,if i put it on the table will it shake or become unstable? since uou pur your PC on the table too. Will it shake after you put the pc on top lf the desk?
The table is very sturdy and doesn't shake even with heavy weight... 10kg should be manageable but keep it towards the end where the metal grill is there so that the load on Particle board is less
@@IAmGizmogeek okay thanks
Redgear ka keyboard kab se use kar rahe ho ? Any problem from keyboard that you faced.i am planning to buy one and any suggestion from you for keyboard under 2000 for full day use?
Hi... Ek saal hogaya leke, no issues till now. As ye mera first mechanical keyboard hain, thoda time laga use to hone ke liye and typing speed pakadne. Personally typing jyada hoga toh I would prefer a membrane keyboard for full day use, but agar mechanical hi chahiye toh this redgear one is amazing. You can buy it.
Where r u from, IKEA delivered in india??
@@QNEXOP Navi Mumbai and yes Ikea has a store here... I got them picked personally but they deliver too.
i decided to go with black than the beige
@@williams1867 good Choice
Is this better than the frede desk?
Quality wise both are almost same... But I liked Uteslepare to be more spacious and offers much more value for money
How is the desk handling the PC on top? Is the desk still going strong? Great vid! Thanks :)
Hey... Glad you liked the video... It's handling pretty well even now. It can easily take another cabinet too.
Hi bro, great video, I'm planning to buy the same table from the store but not sure if it will fit in my i10 (old model). Can you please confirm if this will fit in my car or not. Thanks in advanced 🙌🏻
@@SanketKulkarni hi... Glad you liked the video. And regarding the transport... I doubt it would fit in old i10 as it's smaller than Baleno that I used. After fitting it in Baleno (new one) I had to almost sit with chest touching the steering whole driving. Would suggest to borrow a bigger car from a friend if possible for the shopping day.
I was gonna do the Karlby / Alex desk set up but this video convinced me on the Utespelare
@@SloRush glad the video could convince you,.. Utespelare is indeed a great choice... If you can, add some pegboards too.
@@IAmGizmogeek that's a great idea, it has good utility with decoration aspect. My desk arrives tomorrow I'm so excited
thank you brother, every question i had was answered in this review 10/10
My pleasure... Glad that the video could help you get the answers... Do subscribe for more such content
bro nice and clean setup ❤ i know what it takes to clean everything . i want know which power extension you are using because u have lots of stuff on u r desk and they all are glowing 😆and i want to know socket amp (power extension socket) please reply asap and thank you
Thank you .. glad you liked it... This is the one I am using from last 1 year... Superb quality
amzn.to/3KbfQ7l
Nice review brother 👍
@@BossaNova___ Thank you brother ☺️
That’s an amazing setup! ❤️
Thank you! 🤗
Nicest setup I ever saw. Too many things on the desk usually makes the setup look bad. But your setup still looks good. Good job.
Thank you so much... Glad you like the arrangement.. It was messy earlier with 2 monitors and me placing CPU on the desk directly... Did some rearrangements to have more free space.
Dope setup 🔥
Thanks! 😃
Back at it 🔥
Thanks bro :)
Are you sure you can put the pc on top of it? If you actually can ill buy the desk
@@5flash713 My PC has been on this table for more than one year and there is no issue.
Hi, can i please know the type of your case or at least the dimension of the case? I am planning to put my PC case in the metal mesh but all cases dimensions are different i am afraid it wont fit
Thank you beforehand.
@@DiNusaOfficial Hi.. This is the one I am using.. You can check the dimensions
www.pcstudio.in/product/deepcool-matrexx-55-mesh-v4-c-argb-atx-mid-tower-cabinet-black/?srsltid=AfmBOorV-eV88uk_yullovmOEZ_KJLgeY4oqv9pzMRsD9IUOacCUAxXH
@@IAmGizmogeek thank you so much for the quick reply 🙏
Koini bro, ab daal Lena video
Haan wahi... Thanks for staying subscribed
Ur Cable management is bad
I know... My wife says the same... Will have to work on it
Not sure but I won't rely on the metal part holding dual monitors with an Arm. 🥲
Initially I thought the same too but if you actually see the metal part it is super strong and can easily take the weight of multiple monitors. There's enough space too to give the arm a proper grip.
I have this desk as i also got it last year and have a dual monitor arm holding up up two 27" in LG Monitors and even had two 31.5" HP Monitors so the back of the desk does hold up well. I even bought a metal plate from Amazon 10"x6" to put under the monitor arm base for more stability and peace of mind. My purchase came with 2 plates so i have another underneath for the clamp on the monitor arm base.
Ayyyyyy 🎉🎉🎉🎉 cool vibes
Thanks a lot 😊