Finally an AFFORDABLE 3D Scanner for your MINIATURES in 2024

แชร์
ฝัง
  • เผยแพร่เมื่อ 23 ธ.ค. 2024

ความคิดเห็น •

  • @Boris945471
    @Boris945471 5 หลายเดือนก่อน +15

    Great video really interesting
    What excites me is the idea of archiving mintures. I think thiers been so many minatires made that are now out of print with no way of viewing or accessing them. Being able to keep historical records and archive them for others to use is a really exciting idea especially with 3D printers become very affordable.

    • @nekrataali
      @nekrataali 5 หลายเดือนก่อน +3

      Especially with stuff made before pewter became industry standard. A lot of lead models have been lost to time due to lead rot because people at the time didn't know how to properly clean and prime their models. A lot of stuff from the 1940s and 50s is gone forever because they'd just paint them with enamel paints onto bare metal with no primer or cleaning then seal them with varnish. This caused rust to build up beneath the paint and over the decades the mini would be ruined.

    • @andersand6576
      @andersand6576 5 หลายเดือนก่อน

      Wish some one would take up the mandle and get the rights to scan old minis to sell prints and stls. One could even pay the original creator royalties for every mini or file sold.

    • @Joel-ym3ij
      @Joel-ym3ij 4 หลายเดือนก่อน

      I want to scan and print the oldschool minis, mostly because I want to print them in the same scale as more modern miniatures. I love the old sculpts, but the scale is too small to use them with modern scale fantasy miniatures

    • @andersand6576
      @andersand6576 4 หลายเดือนก่อน

      @@Joel-ym3ij same here. Wanted an old school space marine kill team in true scale for a long time, but old minis are just so small, some ig minis are taller.

  • @MrBizteck
    @MrBizteck 5 หลายเดือนก่อน +2

    Love this. Looks like a great winter project when my job slows down.

  • @MiniatureHobbyist
    @MiniatureHobbyist  5 หลายเดือนก่อน +5

    Use coupon code: "mini10" for 10% discount on any order 🙂

  • @jeremiahembs5343
    @jeremiahembs5343 5 หลายเดือนก่อน +1

    Looks really cool! If you computer takes that long to boot up there's a good chance you need to reinstall the operating system. Surprisingly the newer versions of Windows work pretty well on older computers as long as you have enough hard drive space and Linux of course runs on almost anything. But if your computer is so old it doesn't even have an onboard wireless card it's probably time for an upgrade. You'd be amazed how much faster newer computers are, but like you I try to get the most out of my machines before upgrading. Computers are far too expensive to upgrade often even when you build them yourself from parts like I do.

  • @andersand6576
    @andersand6576 5 หลายเดือนก่อน

    Great video. Want one of these, just not sure i would have anything to use it for :)

  • @TheTrueCyberpig
    @TheTrueCyberpig 5 หลายเดือนก่อน +1

    Omg you are exactly the way I pictured you. Remember the Beard grows the Man.

  • @harrymorrison96
    @harrymorrison96 5 หลายเดือนก่อน +4

    If you are sending the scan off to get the stl conversion, do they hold any rights to the file?

    • @openscan_eu
      @openscan_eu 5 หลายเดือนก่อน +6

      No, we do not keep any of the files for longer than 7 days, so that you can download the results. Any rights of the raw data as well as the results stay with you.

  • @albertoalonso8975
    @albertoalonso8975 5 หลายเดือนก่อน +1

    Hello nice video ,im into cleaning and resculp scans of old minis and the share for free ,I want to buy it one myself can tell me the plastic is abs or pla ,know some people that told me some pieces can bend whit the heat and i Know the abs filament part are a good solution to that problem

    • @nekrataali
      @nekrataali 5 หลายเดือนก่อน +1

      If you put resin in boiling water for a few seconds, you can bend and warp it a little bit. By repeatedly putting the piece in boiling water, bending it just a little, putting it in cold water, then back into boiling to bend it again, you can get resin to go from being straight to curved and vice versa. You can't do this with filament printer pieces because in order to get the plastic to bend, you'd have to heat it up to the point where it just melts. It won't hold detail when you go to bend it and will act more like wax.
      I hope this answers your question!

    • @albertoalonso8975
      @albertoalonso8975 5 หลายเดือนก่อน

      @@nekrataali bro im talking about the printing parts of the scaner himself XD,i know the rotor part heat up and bend some pieces because i know people that it happen before just want to know the mats ,aniway i ask on the page

  • @byrond1096
    @byrond1096 5 หลายเดือนก่อน

    That is amazing. What is the maximum size?

  • @allenforbes8108
    @allenforbes8108 5 หลายเดือนก่อน

    Awesome, something maybe affordable! Anyways, this week is called: "Kraken" week, by "Pointy Hat", and I've got an idea for an Orc/Ork car that is based on a squid on top of 2 tank tracks for a 1 shot. Now what will you do? 😅

  • @reneesteeves3698
    @reneesteeves3698 5 หลายเดือนก่อน +2

    imagine making something in the old spruegoo way and then being able to make millions of them!

    • @nekrataali
      @nekrataali 5 หลายเดือนก่อน +3

      | 3-D scan Warhammer models
      | Create molds of those scans
      | Pour sprue goo into the molds
      | Have new Warhammer models using GW plastic
      Problem, James Workshop?

    • @reneesteeves3698
      @reneesteeves3698 5 หลายเดือนก่อน +1

      @@nekrataali hahaha that’s brilliant!

  • @sarahpoet6014
    @sarahpoet6014 5 หลายเดือนก่อน

  • @supercharger1958
    @supercharger1958 5 หลายเดือนก่อน

    Brilliant mate …😂

  • @lanesteele240
    @lanesteele240 5 หลายเดือนก่อน

    with 3d printed parts is right at 400 usd. That is not cheap

    • @nekrataali
      @nekrataali 5 หลายเดือนก่อน +2

      It's pretty cheap for a 3D scanner. Most decent ones start around $700. Everything in the $400 range or under can only scan large objects with flat surfaces, which isn't helpful to miniature painters. Or they're for something really specific, like teeth. The industrial 3D scanners GW was using in the early 2000s to scan 3-ups (before they switched to 3D printing) were in the $10,000+ range.

    • @maxlarsen1468
      @maxlarsen1468 5 หลายเดือนก่อน +2

      besides its at wery nice product works well and realy easy to learn

    • @maxlarsen1468
      @maxlarsen1468 5 หลายเดือนก่อน +1

      besides its at wery nice product works well and realy easy to learn

  • @Taematoe
    @Taematoe 23 วันที่ผ่านมา

    374.00 "affordable". Uh maybe for some people.

  • @RonM-f3h
    @RonM-f3h 2 หลายเดือนก่อน

    $200 USD sloppy print, when Amazon sells it for $300 for Bluetooth/wifi 😂😂😂

  • @indoom666
    @indoom666 5 หลายเดือนก่อน

    not sure I can trust someone who would go through the headache of waiting 30 mins for their computer to boot up, it sounds like mental illness, mine starts in .05 seconds