@@3rdgenerationrichkid167 it look like the same one I got on Amazon.. but different brand I guess. Hopefully this will help whoever fixing to fix mine 😂
I have two different heat press 1 is over heating and the other after switching the SSR Solid State Relay out is still not getting hot can you point me in the right direction?
I could use some help. I had a heat press arrive (my very first) and it didn't work. I took the back panel of the display off and saw several wires disconnected. What do you need in order to assist me with getting this thing running? I can take video of what's there.
@@3rdgenerationrichkid167 trust I know it would be high to ship, super heavy was trying to see if you was local, but press just stopped working, I'm following your video and looking in the back it looks just like the one in this video, but everything looks normal, no burned wires, I have had this one for a few years though, but it's my favorite lol
That’s for reply ha dam I couldn’t find where to bolt it (will have another look) as I opened and seems to disconnected/loose (Can I attach to any of the bolts on it?) Everything else looks in order
@@3rdgenerationrichkid167it is completely missing. I had to fix where the wires go because 10 and 11 were switched. And 3 and 4 the area where screws go are empty, screws and wire missing.
Hello, So I have a brand new never used str8 outta the box heat press and its not heating up. I've unscrewed the plate and made sure the wires were all tightened and connected good. There's a light that won't go off, Its the "OUT" light. I feel thats the problem I need to fix. I also have 2 wires a Red & a Blue that came unconnected and I have No clue were or what to connect them too. Are they grounding wires, cause I'm not sure. Do you have an Email or Instagram I could contact you at. I really need help and have no clue how to fix it or what to do. Please if you could help me & Let me know how to get a hold of you. I'd appreciate it, Thanks - Ryan
I’m having to change a few connectors on a few wires that connects to the on and off switch and also change the on and off switch. Does it matter which color wire is plugged to which prong on the on and off switch
I want to upgrade my wiring. What do you recommend
There normally is a 30 amp fuse or switch in the machines ... I would do a 10 gauge wire
hey how are you boss Im having problems with my heat press is there any contact info on you
Which heatpress is this ?
Power press
@@3rdgenerationrichkid167 it look like the same one I got on Amazon.. but different brand I guess. Hopefully this will help whoever fixing to fix mine 😂
Yes, it's the same
I have two different heat press 1 is over heating and the other after switching the SSR Solid State Relay out is still not getting hot can you point me in the right direction?
What brand do you have ???
@@3rdgenerationrichkid167 the 1 over heating is a YF40 Heat Press Machine and the 1 not heating up is a Yonntech
Ok ... I will check into the diagram ... and see if I can locate your issue
@@3rdgenerationrichkid167 do you have an email so I can send you a short video and pictures of the press
What is that thing called that the wires connect to
Controller
No it's in the inside
Shoot me a video and load to your page ...
Where are you located
Canada 🇨🇦
Good day!
Please my Heat press combo machine always sparks fire and goes off anytime I on it.
What should I do?
I would replace the machine
How do I send you pictures of my heat press. There's a burned wire on mine as well and it's the same brand in this video
Make a video .... and post it to your page
And just let me know ... u have post the video ... Thanks ...
I seen them .... Let me look at them in deep detail ....
Good Afternoon .... your switch is burned and the harness is burned ....
The controller look to be ok
What size wires do you recommend?
16,14 or even 12 ... just something heavier than 24
How do we reach you? I need to send photos to you and I ask you a couple questions.
Make a video ... and ask the questions
I could use some help. I had a heat press arrive (my very first) and it didn't work. I took the back panel of the display off and saw several wires disconnected. What do you need in order to assist me with getting this thing running? I can take video of what's there.
Make a video of the wires that are disconnected ... post it to TH-cam .... and let me know ... I should be able to help ... Thanks for the comment 👍
@@3rdgenerationrichkid167 Done. Video link is here:
th-cam.com/video/rMg0udw05wU/w-d-xo.html
I just uploaded a video .... about the wiring .... hope this helps .... thanks 😊for reaching out and posting a video ...✌
what is the brown wire and blue wire
Those wires are coming from the power cord
where are you located?
I only try to help the customer via ... videos ... I don't do repairs on them anymore ... shipping is too high
What's going on with your unit
@@3rdgenerationrichkid167 trust I know it would be high to ship, super heavy was trying to see if you was local, but press just stopped working, I'm following your video and looking in the back it looks just like the one in this video, but everything looks normal, no burned wires, I have had this one for a few years though, but it's my favorite lol
No power to the press at all
Even when you turn the power switch on
hey is the yellow and green wire meant to be connected to anything?
The yellow and green is a ground
It is bolted to the base of the frame
I also have a updated video .... check that one out also
That’s for reply ha dam I couldn’t find where to bolt it (will have another look) as I opened and seems to disconnected/loose
(Can I attach to any of the bolts on it?)
Everything else looks in order
Make a video .... and posted ... so I can check it out .... let me know when u post it ... No problem
My machine is missing the wire between 3 and 4. What do I buy to fix that? And will this cause it to say HHH and beep constantly?
Is the wire just only melted ... check the box ... to see if there is any damage
@@3rdgenerationrichkid167it is completely missing. I had to fix where the wires go because 10 and 11 were switched. And 3 and 4 the area where screws go are empty, screws and wire missing.
Ok ... let me check it out ... actually repairing one right now
Hi I am needing help with my heat press not powering on. I can email you or post video
Yes post a video
Hello, So I have a brand new never used str8 outta the box heat press and its not heating up. I've unscrewed the plate and made sure the wires were all tightened and connected good. There's a light that won't go off, Its the "OUT" light. I feel thats the problem I need to fix. I also have 2 wires a Red & a Blue that came unconnected and I have No clue were or what to connect them too. Are they grounding wires, cause I'm not sure. Do you have an Email or Instagram I could contact you at. I really need help and have no clue how to fix it or what to do. Please if you could help me & Let me know how to get a hold of you. I'd appreciate it, Thanks - Ryan
Please send me a video of the disconnected wires ... to chris@massamanagement.com
I didn't get the video
@@3rdgenerationrichkid167 - I haven't been able to make it yet... this weekend possibly 👍 I appreciate u checking up 🙏
- Kool, I sent you a vid to that email, Let me know what you think, thanks 👍
I posted a new video ... check it out ... just giving you a quick update
I need some help. My heat press machine won't turn on.
Are you capable to remove the back panel ... and check the wiring
?
@@3rdgenerationrichkid167 yes and the wires look fine
Do you have a fuse inside
Should be near the switch
Please what could CJX2-12 doing in an heat press machine ?
I'm not understanding your question
Hi how can I schedule a tech call with you?
What's going on with your press
@@3rdgenerationrichkid167 it turns on then off like it’s a short in it. Sorry just seeing this
Sorry for the late reply ... would you be able to remove the rear cover
How can I get intouch with you to walk me trough fixing my machine
Shoot me your email 📧
@@3rdgenerationrichkid167 this is not going through
I could really use some help with my heat press. Could I email you?
Yes I will post it 4 u
@@3rdgenerationrichkid167 Thank you
What is the issue with your heat press
Are you able to post a video on your page ???
I’m having to change a few connectors on a few wires that connects to the on and off switch and also change the on and off switch. Does it matter which color wire is plugged to which prong on the on and off switch
I need help 😫 my heat press machine wont turn on.
@3rdgenerationrichkid167 I uploaded the video on my page..
Ok great
I didn't see ... see any visible damage
@@3rdgenerationrichkid167 Do you think it's the fuse?
Yes, check the fuse
What happens when the heat temperature gets hotter then you set it for. And it's making a humming noise.
The controller is bad
Where you able to fix it
I need help with mines
Ok ... what's going on with it
My heat press want power on with switch. I press emergency start its come in but goes back off
Which press do you have
Can you please show mew how to replace the fuse?
Is your fuse in the switch ... or is the fuse in the machine
It heats up but before it gets to 300 degrees it cuts off. It’s the orange switch in the side under the power switch.
I will try to figure out how to email you a picture.
I'm going to setup a email ... strictly for TH-cam ....
@@3rdgenerationrichkid167 just checking to see off u have an email yet set up for on here?
I need help
What's going on with your heat press