Kobalt Table Saw With Rack and Pinion Fence System TS10601 [ Easy / Quick / Step by Step Assembly]
ฝัง
- เผยแพร่เมื่อ 21 ก.ย. 2024
- This is a step by step assembly video of Kobalt Table Saw, Model #TS10601 _With Rack and Pinion Fence System). I couldn't find a assembly video of the saw, so I decided to made one myself and share it to the world.
|| Like & Subscribe ||
Hope the video helps you to follow the steps to assemble the product, enjoy!
If you like to see more videos like this, upcoming video of a DIY zero clearance throat plate for this table saw or the shop transformation video, like and subscribe!
Kobalt 10-in 15-Amp Portable Jobsite Table Saw with Gravity Rise Stand
www.lowes.com/...
Tool used:
Socket set 🔩 amzn.to/4alMRZE
Wrench Set 🔧 amzn.to/4cvrDus
*Disclaimer:
1. FTC Disclaimer: Some links above are affiliate links from which I get a small commission, but does not affect you as a customer at all.
2. This video is for educational purpose only and not a replacement of original manual of the product assembly. Also the item is purchased by myself and not sponsored by Kobalt or Lowes
I really couldn't understand anything that you were saying, 😂😂😂 but the video helped tremendously.... just add the final installation items and it's a winner....
I really appreciate your feedback. In the next video, I'll try to improve the audio and lighting as well. I am working on a video for a garage shop lighting upgrade! 😉. Good tip on the final installation items.
Ok. I was wrong. I disassembled it all and started over. I had a couple of things wrong. Thanks for the video.
Glad it helped
Could have done with a few "hey make sure this is in this position before you do this next thing," etc pointers but ultimately only had to partially take it apart twice more before being successful! Thank you.
Also, i think the washer on the lock mechanism should go between the slider (i think they call it a "bonus piece?) and the bar. I swapped it when i was all done and it moves into place better.
Thanks for the tips. Agreed with the washer placement also.
Thank you for this. Saved me the headache of having to read their and follow their terrible instruction manual.
I am glad the video was helpful! 👍
This video saved me the hassle of trying to figure out the poor instructions manual
Glad the video helped you.
One thing that I had to do different from what the instructions said was to put leveling foot, the longer of the two types in the opposite location of where the instructions said. The of course the short adjusting foot wasn't long enough to go into the other location. However, this allows me to level the table saw with the added length of the leveling foot. Strange, but it works this way.
Thanks for watching! Let me know how did I do and areas of improvements (Which, I am sure there are many! 😆etc. Thank you!
Dude seriously this thing has a tone of screw holes I REALLY REALLY wish you had said this piece screws into the third hole from the bottom through the second hole of this piece. From the video I honestly can't tell this hunk of junk is still sitting half put together on my floor. 3 people including myself watched your video and read the directions and still don't know 😢.
This is one of the most complicated assemblies I've done. I tried to use notes in different points of the video to help people not make the mistakes.