Knife Making - forging my first feather explosion damascus with Thiers steel
ฝัง
- เผยแพร่เมื่อ 22 ก.พ. 2023
- Knife Making - forging my first feather explosion damascus with Thiers steel
[EN] In this video I finally test my press and make my first feather explosion damascus. When you are self-taught in damascus you say to yourself I understood how he did it but putting it into practice is not so easy! Forging a damascus feather blade is not easy I spent hours watching videos on this subject and once I understood the steps I started, but between theory and practice there is a world! I managed the steps pretty well until I split my damascus ingot in half to give the feather design because the tool I made for myself to split the ingots was too thin and it melted as I went. In addition, my tool was stuck in the ingot, I sweated to get it out and had to cut it again each time. I'm going to have to make myself a stronger tool! but hey, I'm happy with the result because this feather damask is unique.
see you soon BOULDERDASHFORGE
Share the video with your friends who might be interested.
[FR] Dans cette vidéo je teste enfin ma presse et réalise mon premier Damas plume explosion. Quand on est autodidacte en Damas on se dit tien j’ai compris comment il a fait lui mais le mettre en pratique n’est pas aussi facile ! Forger une lame Damas plume n’est pas de tout repos j’ai passé des heures à regarder des vidéos sur ce sujet et une fois compris les étapes je me suis lancé, mais entre la théorie et la pratique il y a un monde ! j’ai plutôt bien réussi les étapes jusqu’au moment de fendre mon lingot de damas en deux pour donner le dessin de la plume car l’outil que je me suis fabriqué pour fendre les lingots était trop fin et il a fondu a mesure. En plus mon outil restait coincé dans le lingot j’ai sué pour le sortir et j’ai dû le redécouper à chaque fois. Il va falloir que je me fasse un outil plus costaud ! mais bon je suis content du résultat car ce Damas plume est unique.
à Bientôt BOULDERDASHFORGE
Partagez la vidéo avec vos amis qui pourraient être intéressés.
▬▬▬ TO GO FURTHER ▬▬▬
💡 Subscribe to BOULDERDASHFORGE to follow my various craft achievements:
urlz.fr/joOW
💡 Find me on my website: www.boulderdashforge.com/
💡Discover my playlist: urlz.fr/joPp
▬▬▬▬ SOUND ▬▬▬▬
Musique : Metal par Alexander Nakarada (www.serpentsoundstudios.com)
Sous licence Creative Commons BY Attribution 4.0 License
creativecommons.org/licenses/ par/4.0/
▬▬▬ ABOUT THIS VIDEO ▬▬▬
I regularly post cutlery, metalwork, blacksmithing and furniture videos 😊 so don't miss anything subscribe!
#BOULDERDASHFORGE #knife #craftsman #forge #knife making #blacksmith - บันเทิง
[EN] To support me don't forget: Share my videos around you! Thanks in advance BOULDERDASHFORGE
[FR] Pour me soutenir n'oubliez pas: Partagez mes vidéos autour de vous ! Merci d'avance BOULDERDASHFORGE
What kind of powder that he use is?
Дд
Дд😊
This is inspiring. If I ever forge, I learned a couple really nice things in this video.
cool ! Thank you 🙏
No one should have that kind of skill. But I’m happy they do. Art in knives and a true artisan creating them. Thanks for sharing!!! Ciao.
Thanks for your comment 🙏 FYI I do everything myself. Ciao
Last forging session I thought you ruined it! So lucky you had enough meat to finish this beautiful feather damascus!
yes I was very hot but fortunately I was able to take out a nice blade thank you for your comment 👍
Beautiful work. Thank you for sharing.
thank you very much it is with pleasure 😉
A Masterpiece! Beautiful!!
Thank you very much 🙏🙏🔥
Wouldn't be out of place in a high-end kitchenware catalog and/or retailer!
So thank you very much for the compliments, it means a lot to me 🙏🙏🙏🙏
Oh man now I need a press, and a sander, and a shop space and..
Gorgeous work, thanks for sharing.
glad you like it 👍👍🙏🙏🙏
Вот это я понимаю работа.Высший пилотаж.Браво маэстро.
спасибо большое 🙏🙏🙏🔥🔥🔥
Dang. That knife is gorgeous.
Thanks a lot 🙏🙏🙏
Very beautiful knife. Congratulations on your work!
Thanks a lot 🙏🙏🙏🙏
The forge work there was brilliant.
thank you very much 🙏😉
Ну это художник, а не кузнец!💪🤩👍
спасибо большое 🙏🙏🙏🔥
Excelente trabajo mi amigo, le quedo espectacular 👏👏👏🇨🇴
Gracias 🙏🙏🙏
Excellent job on your first feather pattern.
Thanks a lot 🙏🙏🙏
Действительно красивая вещь. Можно с уверенностью сказать, что это произведение искусства!
Спасибо большое 🙏🙏🙏🙏
Incroyable !
Grazie mille 😉
Sacré boulot... Magnifique !!!
Merci 🙏🙏🙏
Spectacular.
Thanks 🙏🙏🙏
Sr. Ud es un maestro. Su cuchillo es muy hermoso . Felicitaciones
gracias me hace muy feliz 🙏🙏🙏
I really do admire and marvel at master craftsmen that are capable of this degree of excellence. It is a special gift and I enjoyed watching.
thank you for this compliment I am happy that you liked my video !
Amazing workmanship ❤
Thanks 🙏🙏🙏😉
Piękna robota .
Dziękuję 🙏🙏🙏
master !
🙏🙏👍
Sublime !
Merci 🙏🙏🙏😊👍
Прекрасная работа, с хорошим художественным вкусом.
большое спасибо 😊
Bruh you truly do wonderful masterpieces
Thank you very much 🙏🙏🙏🔥🔥🔥
Il est vraiment très beau, félicitations Rémi
Merci 🙏🙏🙏
Comme dit plus haut une œuvre d'art ! Encore plus beau en vrai qu'en vidéo ☺️
Merci ! comme tu dis encore plus beau en vrai 🤩
Well said.
@@YIAudta.. 👍👍👍🙏🙏🙏
Did a great job, really nice craftsmanship
Thanks a lot 🙏🙏🙏🔥🔥🔥
Your video came up on my recommended
Excellent work
Subscribed
Saludos Cordiales
thank you very much it's really nice! see you soon have a nice day 😉
Totally beautiful knife
Thanks 🙏🙏🙏
Une œuvre d’art bravo
Merci 🤗🙏🙏🙏👍
Masterpiece
🙏🙏🙏🙏😊
Beautiful work
Thanks 🙏🙏🔥
Magnifique !
Merci 🙏😉 🤗
So awesome man. You have a real talent
Thanks a lot 🙏🙏🙏🔥🔥🔥
Isso sim que é uma obra de arte...
muito obrigado senhor 🙏🙏🙏
Great skill, and I love the choice of music🤘 New sub!
Thanks a lot 🙏🙏🙏
Beautiful knife, and it was fun watching it be made.
Thanks 🙏🙏🙏
that's very nice.. and captivating to watch.. thank you.
Thanks a lot 🙏🙏🙏👍👍👍🔥🔥🔥
SPLENDIDE !
Merci 🙏🙏🙏🔥
Nice piece of art
Thanks 🙏🙏🙏🙏
Thanks Damaskus ❤
🙏👍😉
Muito bom seu trabalho 👍👍👍
muchas gracias 🔥🙏🙏
Beautifull!
Thanks 🙏🙏🙏
Muito capricho você tem.
Belíssima faca.
🙏🙏🙏
Really beautiful
Thanks 🙏🙏🙏🔥
Very cool knife
Thanks 🙏🙏
Wonderful knife snd VIP ⭐
Thanks a lot 🙏🙏🙏🙏🔥🔥🔥
Hi, great job, well done. Cheers :)
thank you very much glad you like it 🙏🙏🙏👍👍👍
Ottimo lavoro. Bravo
Gracie mille 🙏🙏🙏
Congratulations magnificent work
Thanks 🙏🙏🤗
Gran descripción gráfica del diseño, cómo giras e intercambias las placas de damasco. Excelente cuchillo
¡Guau! muchas gracias 🙏🙏🙏 🔥🔥🔥
Superbe, bravo !! 🤩
Merci beaucoup 🙏👍
Muito bom seu trabalho . Very beautiful knife. Congratulations on your work!.
Thanks a lot 🙏🙏🙏🔥🔥🔥🔥
Well done , Bon travail .
Merci 🙏🙏🙏
Bon travail grand maîtrise👍
Merci beaucoup 🙏🙏🙏
Вай-вай,какой красивый,слушай да!
Спасибо большое 🙏🙏🙏🙏
Respect
Thanks 🙏
beautiful knive.....
Thanks 🙏🙏🙏
Juste wahou !!
Juste merci 🙏
Du coup c'est tellement beau qu'il me le faut!!! Je te passe commande, je veux le même.👌👍😆(ceci n'est pas une plaisanterie). Bizz Dash😘
Merci l'ami il est disponible je le mets bientôt sur mon site :)
Expetacular essa faca deve mais de 700 camadas de aço damasco, parabéns 👏👏👏👏👏
OBRIGADO 🙏🙏🙏🔥🔥🔥
You have any web where Im can buy?
Uma bela OBRA DE ARTE, fico pensando quando seria o preço de uma arte como essa.🤔🤔
muchas gracias 🙏🙏🙏 mi sitio: boulderdashforge.com
cuando le metio corte mola no me gusto me gusta q sea todo forjado
Ну вот и набрались, набежали просмотры. 🙄🤝
Как сказал один советский космонавт - Если то, что ты делаешь, правильно, то это со временем обязательно поймут.
👍😉
Hermoso
Thanks 🙏🙏🙏
Spettacolare 😊
Grazie mille 🙏🔥
Bien joli ton opinel !
J'ai remarqué une nouvelle presse ...ça à l'air de bien fonctionner...des bises
😂, Merci mon pti des bises
Mantap 👍👍👍👍👍👍👍❤❤❤❤
🙏🙏🙏🙏🔥🔥🔥🔥🥰🥰🥰
super
🙏🙏🙏🔥🔥🔥
Cortar uma carne com uma faca de aço damasco desse padrão, é garantia de sucesso ...kkkkkkkkk
Linda demais. Parabéns pelo trabalho. Ainda vou ter uma dessas.
ter uma faca de damasco requer manutenção mas proporciona imenso prazer 👍
🔥🔥🔥👍👍👍
🙏🙏🙏
본 것 중 최강인다!
🙏🙏🙏🙏🔥🔥🔥🔥🔥🥰🥰🥰🥰
Aparentemente essa faca extraordinária tem 7.168 camadas de aço damasco. Não tem como não se apaixonar por esse padrão
muito obrigado isso me deixa muito feliz 😊 confesso que não contei as camadas de aço 😂
@@boulderdashforge kkkkk eu me basiei pelo número de placas de aço, contei 32 placas, não não tenho certeza se era exatamente isso 😅 aí multiplique pelo número de camadas cortadas e empilhadas kkkk, excelente trabalho
@@Yelsew1992 OBRIGADO ! sim deve ser isso 👍
СУППЕР 🎉
🙏🙏🙏🔥🔥🔥😊
This has to be one of the most beautiful piece I have seen so far! Congratulations! I wonder if this piece is for sale?
Thank you for your comment ! yes it is for sale. Find my creations on my website: www.boulderdashforge.com/
Hi Myster blacksmith...This is incredible job!
how much does a knife cost.
@@vitaliybashtovyy9446 thank you very much everything is on my site : boulderdashforge.com
@@boulderdashforge why is the website french?
@@ChrisTomatoPie because I am French and I work in France
👍👍👍
🙏🙏🙏
👏👏👏👏👏👏
🙏🙏🙏🔥🔥🔥
Amazing!!!!🤩🤩🤩
Elle sert à quoi la petite poudre de perlimpinpin que vous mettez sur le métal chaud Monsieur le forgeron?
Bonjour privatefun, merci pour ton commentaire 👍👍👍 la poudre c'est du borax ça sert a décaper l'acier pour favoriser la soudure des plaquettes entre elles. 🙏🙏🙏😉
Vraiment classe ! J'aime la répétition du triangle à 3 ou à points. Perso quand je fait du rivetage décoratif (souvent 1mm cuivre ou laiton), je me dis que mater ne suffit pas et qu'il faut aussi coller. Est-ce vraiment nécessaire ? Car je vois que vous ne le faites pas ! Après on est pas sur le même diamètre mais j'imagine que la même logique s'applique ^^
Merci 🙏 pour les rivets c'est du 2mm, la il rentre en force et je les frappe bien mais oui on peu ajouter de la colle aussi ça peut y faire que du bien 😉 d'ailleurs sur l'arrière du manche je les colle car ils aident à tenir l'ensemble. Sur le manche ce n'est que de l'esthétique
whaouuu jolie
Merci 😊🙏🙏🔥
Mantab
🙏🙏🙏
Please tell me what is the name of that glue ?? For making knife handle.
Hi! it's epoxy resin ✌️
Beautiful knife. But is that handle just glued on? None of those decorative pins go through the tang not are the buttcap pins structural. Will that handle hold up long term. Absolutely beautiful though.
Thank you very much 🙏 the handle is glued with epoxy glue then the silk goes through the 2 pieces of wood cast in epoxy as well. The nails are just there for decoration. This handle will never move 😉👍
so beautiful knife, so if you cut anything with it it explode ?
THANK YOU !!! the explosion is the bending of the steel layers on their edges :)
у вас интересный пресс!Есть обзор этого пресса?
Я очень доволен им, я снял видео о создании моего пресса 😉.
🇩🇪 Top 1A 👍👍👍👍👍👍✨✨✨✨
🙏🙏🙏🙏🔥🔥🔥🔥🗡️🗡️🗡️
nice knife...plz make rambo knife after this...👍🏻👍🏻👍🏻
Thanks I already made the Rambo knife
th-cam.com/video/83JkJGqu0nQ/w-d-xo.html
💪🏻👍😎
🙏🙏🙏🔥🔥🔥
Impresionante cuchillo, como se pueden conseguir???😮
Muchas gracias 🙏🙏🙏 ponerse en contacto conmigo :
boulderdashforge@gmail.com
6:45 This is going to sound silly, but you need a 2 headed hammer.
8:10 What happened? Not hot enough or too much squish?
15:50 I have no idea if this would work, but if those 3 little holes were still a little abrasive inside, I bet you could pour a red-colored clear epoxy (TotalBoat) into them for a splash of color.
Cool-looking blade.
Hi! 6:45 I only need one tool to split otherwise the feather pattern would be in both directions. 8:10 I think I crushed too hard which made my soldering burst (I was so happy not to do it by hand anymore that I was too greedy). 15:50 yes it's possible it's a good idea. If you like it don't forget to subscribe 😉
@@boulderdashforge I was trying to say in order to get the piece off of your chisel splitter, you need a hammer with 2 heads that are a couple inches apart so you hit down evenly from both sides. I was trying to be cute by half.
The only part of the blade I worry about is the hard 90s at the small tang. I never saw a close-up to see if those corners were rounded.
I'll subscribe, you keep producing cool stuff. Deal?
@@AndyFromBeaverton Ah ok I didn't understand about the hammer, thanks for the clarification, I'm going to get a bigger chisel with a stronger steel because this one is too thin and too fragile. Yes, there are small roundings on the silk. I will continue to do other projects now that I have invested in a camera. I'm starting to have good equipment to make beautiful things I hope my videos will be more and more qualitative.... Thanks a lot for the comments
Hello. Good day to you.
You did a great job.
What liquid did you use in the tube to make the blade emboss the pattern? Is that engine oil/Lubricant?
Thank you
hello Thank you very much the liquid used is iron perchloride
Thank you. The knife you made is truly a work of art.
@@user-ul7kq5lj5l with pleasure 😉 thank you very much 🙏🙏🙏🔥
Magnifique. Je suis curieux de savoir combien de temps ça prend de créer une telle pièce.
Merci 🙏 34h de taf en tout 😅
@@boulderdashforge merci pour la réponse. Et encore bravo pour la performance
@@nico77 merci à toi 😉
Красивый клинок, хорошая рукоять, информативное видео... и мало просмотров. Что людям и ютьюбу нужно? 🙄
Спасибо, это поднимает мне настроение, потому что у меня тот же вопрос...🙏🙏🙏
@@boulderdashforge Значит, кино не для всех. Поэтому просто делайте своё дело, которое нравится. 🤝
@@Leonid-22 да, я тоже пришел к такому выводу. еще раз спасибо за комментарии, до скорой встречи 😉
@@boulderdashforge Простите за совет, просто опыт: пакет перед разрубом лучше проварить электродом по углам. Не растрескивается.
А чтобы он не растрескивался при расковке в клинок на боковые плоскости можно наварить при сварке разруба тонкие железные пластинки.
th-cam.com/video/c6JrUXH_CIU/w-d-xo.html Можно и так. 😊🖐
용접 장면은 화면을 조절 할 필요가 있겠습니다. 놀라운 솜씨 잘 봤습니다
정말 감사합니다🙏 다음 영상에서는 솔더링 마스크와 비슷할 수 있는 것을 찾았습니다. 훨씬 더 좋을 것 같아요
Santo ku. Abençoado ku.
👍
hello dude, can i ask you something? what is that little wite stuff you put on the steel during the heating? And what that use for ?
hello, it's borax powder it is used to strip steel to facilitate welding 😉
I live in South Korea and you are the best at making knives. It would be an honor if I had a nice knife you made. If I get a knife as a gift, it will have more subscribers in South Korea. And I'll cook delicious food for the family with that knife.
thank you very much for your comment it makes me very happy 😉 Unfortunately I can't afford to offer my knives I too have a family to feed. that's why I make videos to show you my work and so that those who are really interested can do it again at home. Sincerely BOULDERDASHFORGE
@@boulderdashforge I understand and support you 👍
@@user-om4pi1un9z thanks 🙏🙏🙏
"Porque Deus tanto amou o mundo que deu o seu Filho Unigênito, para que todo o que nele crer não pereça, mas tenha a vida eterna."
João 3:16💚
🙏🙏🙏