This is different from all the but allocation videos I've seen thank you. But I'd like to ask won't the 0.5 you took from the waist affect the measurement?
Thank you for the tutorial but my question is won't the 1 inch and 0 5 inches be replaced and secondly I noticed that the skirt pattern the hip line goes straight down, it wasn't shaped
Thank you ma,my question now is when cutting on the main fabric especially the front,how we going to shape it out as the paper wont the front be into two?
Thank you so much for this great video. My concern is, will the back pattern not going to be longer than the front pattern after lifting the butt by 1". Thank u
Goodday ma,I just came across your channel and your work...thank you for the knowledge.. Pls ma,for this technique ,after drafting it on a paper and you want to transfer it to the fabric,do we transfer directly the way it was done on the paper? And after transferring on the fabric,are we placing anything like gumstain,canvas,or thick chestpad to give it a round shape?
Thanks for d video, I noticed that the pattern are straight as in u didn’t shape d knee part of d skirt. Again d 0.5 inch taken from d waist line will it be replaced. Or it won’t affect d measurements.
The 0.5 won't affect the measurements, about the knee ignore that the skirt was done for illustration, like I said in the video this can be done for any type of garment of your choice, not necessarily skirt also a dress.
Thank you Ma I really appreciate this secret you have shown us. Pls if am doing free hand how do I have this hip slash of 1inch effect. Thank you and God bless you.
Hi dear the slashing is not achievable with freehand, how ever if you do only free hand you can still do your connections one inch at helm half inch at waist and connect to give it also a rounded look without the slash👍
Great idea but Please is this technique for people with bumbum or flat bum? Because the way I see it, if the bum is flat it will create a balloon at the back.
Thank you for this ma. When cutting it on the main fabric, do we also cut it out at the hip line like you did on the paper, and if yes, what should be put underneath to lift it. I hope you understand my question ma
Ma thanks so much for the tutorial ps my question is Can be butt lift go for anybody cos I tot its only for those dat hv a big butt so the butt lift helps create more room for the butt to sit and also prevent the case of shorter back ( the ass pulling the clothe up). Secondly, the half inche that was removed from the waist n connectd tother neck n hip, did u replace it at the side back of the waist while drafting? Sorry for my long story
![[TH] 2024 PMWC x EWC Group Stage Day 3 | PUBG MOBILE WORLD CUP x ESPORTS WORLD CUP](http://i.ytimg.com/vi/VnOqutfqWqU/mqdefault.jpg)
Thank you. This is the simplest tutorial on the but illusion I have watched!
Thank you so much for this illustration. Please my question is won't the back be longer than the front when joining?
Thanks so much.
What about front. How do we accommodate protruding belly?
For someone with tommy.
This is different from all the but allocation videos I've seen thank you. But I'd like to ask won't the 0.5 you took from the waist affect the measurement?
Thanks so much sister for the tutorial. I'm subscribing right away.
Pls can it be applied to tummy area for people with protruding tummy ?
Thank you for the tutorial but my question is won't the 1 inch and 0 5 inches be replaced and secondly I noticed that the skirt pattern the hip line goes straight down, it wasn't shaped
Thanks for this tutorial and I have subscribe to your channel
Much love..... Thank u
Thank you ma,my question now is when cutting on the main fabric especially the front,how we going to shape it out as the paper wont the front be into two?
Thank you so much for this great video. My concern is, will the back pattern not going to be longer than the front pattern after lifting the butt by 1". Thank u
U r the best 👌
That's what I'm waiting for thanks my sister ❤
Goodday ma,I just came across your channel and your work...thank you for the knowledge..
Pls ma,for this technique ,after drafting it on a paper and you want to transfer it to the fabric,do we transfer directly the way it was done on the paper?
And after transferring on the fabric,are we placing anything like gumstain,canvas,or thick chestpad to give it a round shape?
Won't the back be longer than the fro not by the additional 1 inch
D part u cut of for 1inche and 0.5inches will it be replaced back wen cutting d pattern on d fabric
Understood clearly I learnt something new today thank you for sharing, blessings
Hi, can it be use for trousers pattern
Thank so much dear very important
What abt if u are to draft on ur fabric directly how do u go abt it
Thanks so much for this tutorial, so clear. I've subscribed to your channel
How will I cut d front part at d hem line bcos it will be longer Dan d front
Will this work for hip 53
Ma please what did you use at the waist and hips measurements did you add allowance before deducting the 0.5 am so confused here please help me thanks
Wow thank you very much ma, God will always bless you and always keep you strong to give us secret.
Amen, thanks so much
Pls ma'am ll u use the accurate measurements for shaping after all this process
Can I apply this method for a mermaid skirt?
Please ma how will this balance with my front pattern when joining together since this is just for the back
God bless you for this ma. Can I do this on an A sharp with tail skirt
Yes, it's done on all kinds of skirts
Nice tutorial.... My concern is, that additional 1 inch at the back where you slashed, won't it affect the length at the CB??
No it won’t, the butt will sit in it. I do this all the time so as to avoid d butt side squeezing in and not sitting well
Thanks for d video, I noticed that the pattern are straight as in u didn’t shape d knee part of d skirt. Again d 0.5 inch taken from d waist line will it be replaced. Or it won’t affect d measurements.
The 0.5 won't affect the measurements, about the knee ignore that the skirt was done for illustration, like I said in the video this can be done for any type of garment of your choice, not necessarily skirt also a dress.
Thank you Ma I really appreciate this secret you have shown us. Pls if am doing free hand how do I have this hip slash of 1inch effect. Thank you and God bless you.
Hi dear the slashing is not achievable with freehand, how ever if you do only free hand you can still do your connections one inch at helm half inch at waist and connect to give it also a rounded look without the slash👍
Thank you ma,why are you lifting the center front, would it not make the front bulging
That's a centre back not front. This technique is usually done at the centre back
Great idea but Please is this technique for people with bumbum or flat bum? Because the way I see it, if the bum is flat it will create a balloon at the back.
Very simple and understanding. God bless you
Thank you for this ma. When cutting it on the main fabric, do we also cut it out at the hip line like you did on the paper, and if yes, what should be put underneath to lift it. I hope you understand my question ma
No dear this is strictly pattern drafting technique, the lift cannot be achieved directly on fabric
Good
Beautiful easy to follow tutorial. Thanks!
Good good comment
Ma thanks so much for the tutorial ps my question is
Can be butt lift go for anybody cos I tot its only for those dat hv a big butt so the butt lift helps create more room for the butt to sit and also prevent the case of shorter back ( the ass pulling the clothe up).
Secondly, the half inche that was removed from the waist n connectd tother neck n hip, did u replace it at the side back of the waist while drafting?
Sorry for my long story
Please Can u also do butt allocation to this butt lift?
Ma pls wont d back be longer dan d front
No dear, the bum bum will take it in
I always thought was 2"
There is no rule to it, it depends on the size of the person butt. I add 2” to mine, 1.5 inches to pple with hips 39-42 and less just like dat
I understand ma
Good