mdt makes plenty of quality rails in all sizes cheap too . im attaching mine with screws . simple . and can now mount my ckye pod bipod on all my regular firearms !!
What is the best optimal length for a CZ 457 MTR stock? and how do I install it for Benchrest and Bipod shooting. Do you have a video for installation & setup please. Where can I purchase this Arca Rail system in the UK? Many thanks.
So I have a 2020 Winchester Severe service stainless in 338 Win Mag and it kicks more than I can stand. I have 11" of length just in front of my mag well screw and I would like to add weight and maybe a tri pod mount to the rail. I've put a lot of lead in the rear cavity of the stock and I'm trying to balance it out some and I wouldn't mind adding 2 lb to the front if I can get that much. So I'm thinking the 10" arca rail minimum, but I could stand a little overhang with a 12" possible? What do you guys think? I have a picture, but I don't know how to attach it to this.
what is the size rail for MDT XRS chassis? I'm sure I can use the 10" rail but can the universal 12" be used as well?.... I am assuming if the 12" is used then there will be overhang... is that feasible?
Where can I purchase one in Canada? Also where is the ARCA clamp and 9 to 13" bi-pod avaliable? What length rail would you recommend for my RPR ? I hope you will email my answers to me... im going to subscribe if requires. Thanks...Best regards Michael Currie I
Just helped a buddy install the universal rail (can’t remember the length) it actually ended up being way easier than expected. The hardware that came with it will actually screw into the two existing threads in the at-one forend
On that stock you're only going to be able to run one back to the little bump about 2" in front of the magwell. The 8" or 10" would be best. You'll also end up drilling/adding a rear anchor point just ahead of that bump.
mdt makes plenty of quality rails in all sizes cheap too . im attaching mine with screws . simple . and can now mount my ckye pod bipod on all my regular firearms !!
Just the video i was looking for.
Can’t use our 12” mlok arca rail without 7 consecutive mlok slots.
Unless you’ve got 6 mlock slots and a file that you’re not afraid to use. Lol
What is the best optimal length for a CZ 457 MTR stock? and how do I install it for Benchrest and Bipod shooting. Do you have a video for installation & setup please. Where can I purchase this Arca Rail system in the UK? Many thanks.
Do you have a measuring tape?
do you have contoured rails for regular hunting stocks?
What rail would you suggest for a Bergara Premier Ridgeback?
My Springfield waypoint has 3 mlok slots. What size can I use if I do not want to just use the existing mlok slots?
So I have a 2020 Winchester Severe service stainless in 338 Win Mag and it kicks more than I can stand. I have 11" of length just in front of my mag well screw and I would like to add weight and maybe a tri pod mount to the rail. I've put a lot of lead in the rear cavity of the stock and I'm trying to balance it out some and I wouldn't mind adding 2 lb to the front if I can get that much. So I'm thinking the 10" arca rail minimum, but I could stand a little overhang with a 12" possible? What do you guys think? I have a picture, but I don't know how to attach it to this.
Just curious - why is there no Zero Press in the background?
This video pre-dates the press!
Do you have any solution for Blaser R8?
what is the size rail for MDT XRS chassis? I'm sure I can use the 10" rail but can the universal 12" be used as well?.... I am assuming if the 12" is used then there will be overhang... is that feasible?
Where can I purchase one in Canada? Also where is the ARCA clamp and 9 to 13" bi-pod avaliable? What length rail would you recommend for my RPR ? I hope you will email my answers to me... im going to subscribe if requires. Thanks...Best regards
Michael Currie
I
Boyds AT ONE
Just helped a buddy install the universal rail (can’t remember the length) it actually ended up being way easier than expected. The hardware that came with it will actually screw into the two existing threads in the at-one forend
What do you recommend for Magpul 700 Hunter? It measures 11.5 inches but only has two M-Lok slots in the front.
On that stock you're only going to be able to run one back to the little bump about 2" in front of the magwell. The 8" or 10" would be best. You'll also end up drilling/adding a rear anchor point just ahead of that bump.
Do u have just a Swiss arca plate that screws directly to the stock and is non adjustable for hunting rifle stocks such as a bell and carlson medalist
All of our stocks can be attached directly to the stock. The 4.25” or 8” would be my picks for a strict hunting application.
Recamendation for Sig Cross?
Will arca mount to hand guard style bolt actions like the Sig Sauer cross?
Sure, without one in-hand I'd guess the 12" MLOK model would be an easy install and SUPER solid.
Can i use one on these rails on my t/c venture stock
No reason why not - and if you need some help choosing the correct rail, well, you’re in the right place…
I wanna 14 without the barricade stop!
What would be recommended for a A5 mcmillan
12 would come out pretty flush
Yep it wud. I got the 14 in the end.
Did it work with the front action screw or did you have to drill it forward of that
Worked with the front action screw.