You really are the truth holder. I'm standing here looking at a pile of crap. To think these azzholes couldnt do their OWN job. If this random person didn't do this video, WE as PAYING CONSUMERS would be SCREWED. Yes this guy made the vid out the kindness of his heart but that doesn't eliminate that the manufacturers are classless useless failures.
i'm a sngle mom so i became a handy woman learning how to put things together by myself watching youtube videos. After watching this video it took me 5 minutes to put this together. it was very easy to remember the video instructions. i hate paper intruction. they are very unclear. i need to see videos like this to learn how to do things so thanks!
Yes I understand. A lot of them just show the pictures without words to assemble their products. I'm a single mother too and I had to become my own Ms. Handywoman too.
Hi Gabriel. Thanks for your comment .I'm glad this video helped you. 😊 please share the channel with your friends on Social Networks and hit the like button.👍🏽👍🏽 th-cam.com/users/proassembler
I just bought this frame a few days ago and sit on the floor to put it together. Instructions really didn't help. TH-cam here I come. You did a fantastic job. So helpful. Now only if you could have helped this seventy-one year old do the famous crawl off of the floor 🤔😊😅. Thank you for making this simple.
The opening space in the bars for a full are supposed to be placed over the existing bar. If that makes sense. They are supposed to fit together for more support.
Thanks for your comment We can use it for both queen and full modes. If we add the bars part, its size will be bigger and if we do not use it, of course, it will be smaller. I hope I understood your point correctly and vice versa.
Came back to a video of this bed to make it into a full from a twin setting I have been using. Your comment helped me. It make sense to align the extending bars to the existing bar. And the on with short casing was meant for the middle. Nice. Thanks.
Hi there. You can use any washer as long as the diameter of the washer hole is not bigger than the diameter of the screw. You can take a screw to Lowe's or Menard or Home Depot and get a washer.
I'm sorry, but when you removed the bolts from each end, where you showing that the frame can also be a twin? Otherwise you made this look very easy! thank-you
@@ProAssembler Guess what? it is easy! the only thing I suggest is that you allow the mattress lie flat in a warm room! the room I was using was cold, and it it took 3 days for it to fully expand, so I moved it to a warmer room, and it worked out fine! Like dough rising!😁
Where did you get the extension bars? I cannot find it anywhere, it did not come with my twin a few years ago when I got it and now I want it to extend it to a full. Thank you!
Hi Nora. I did not get it from anywhere. This is a complete package. This link is its full price. www.walmart.com/ip/Spa-Sensations-by-ZINUS-14-SmartBase-Adjustable-Platform-Bed-Frame-Twin-Full/291460087
So basically take the bed frames out turn them upside down open up the two bars underneath the bed put them in the whole take a screw screw it in do it to the other end too go to the other bed frame do the same thing after that put them together take the big screw put it in a hole take a washer put the washer in the middle push it threw the washer into the third hole then take a screw screw that up then do it to the other end that's it now go to sleep there is no need to look at the directions that's a twin for a full don't use the big screws make those two bed frames up then put the six bars you got in the box put them in the middle of the bed to spread it out to make a full that's it any questions ask him or me
That's what I'm trying to figure out. I don't want my son to fall through the middle of his mattress and I don't want it to buckle Underneath Him. I guess I'll put it in the Box in save it
Hi there . I do not remember exactly, but I think the size was 6 mm. The screw thread is also important and I do not know if it was small or large. I do not know if you have lost all the screws But if this is the case, be sure to look at the cartoon box again, and if it is just a screw, you know what to do.
@@ProAssembler there is not one ☝️ ugghh these days no matter which store if it’s not “ chat” only .. which this company does not have that option but there is an email us comment section but I gave not had a reply to that email 😯
@@joansmith6844so you need a u shape metal to attach both together. Just figure out where you can find a small metal with size between to bed Or order it again 🤔 . Sorry for that.
@@ProAssembler I know was thinking of just ordering it again .. just for those spacers Not what u mean by U shape? These spacers are for the middle goes between each twin frame to make / adjust to a king I’ve looked ever where on line for a dupe or these parts but they don’t exist .. option 1) order new 2) company contacts me and I’m actually able to just purchase them -& hoping there not expensive There straight flat metal pieces / having downward teeth that lay flat that go in between the two frames making it a king
@@joansmith6844 😉😉😉😉 I know what you say because I assemble that . I Wana say instead of that piece u can use u shape to fix that. Make something to fix . I think the best option is order but you know it is money. Good luck 🤞
@@ProAssembler thank you so much for your reply I did manage to get it all together but without your help I would have been up the creek without a pattern thank you again
Thank you for this video. The "instructions" that came with it are literally as useless as a puddle of mud.
that’s what i’m saying
You really are the truth holder. I'm standing here looking at a pile of crap. To think these azzholes couldnt do their OWN job. If this random person didn't do this video, WE as PAYING CONSUMERS would be SCREWED. Yes this guy made the vid out the kindness of his heart but that doesn't eliminate that the manufacturers are classless useless failures.
this
You are a lifesaver, thank you! I was on the verge of tears looking at the diagram that was included with this bed frame. Thank you thank you!
i'm a sngle mom so i became a handy woman learning how to put things together by myself watching youtube videos. After watching this video it took me 5 minutes to put this together. it was very easy to remember the video instructions. i hate paper intruction. they are very unclear. i need to see videos like this to learn how to do things so thanks!
you're welcome.
Please share the channel with your friends.
Yes I understand. A lot of them just show the pictures without words to assemble their products. I'm a single mother too and I had to become my own Ms. Handywoman too.
Great, step-by-step video of how to do this with the twin-full arrangement. VERY easy to follow. Even had some cool "learning" music. Well done! :)
Hi Gabriel.
Thanks for your comment .I'm glad this video helped you. 😊
please share the channel with your friends on Social Networks and hit the like button.👍🏽👍🏽
th-cam.com/users/proassembler
Where does the bar with the smaller ends go.
I just bought this frame a few days ago and sit on the floor to put it together. Instructions really didn't help. TH-cam here I come. You did a fantastic job. So helpful. Now only if you could have helped this seventy-one year old do the famous crawl off of the floor 🤔😊😅. Thank you for making this simple.
Hi Rose.
I'm glad this video was helpful. thanks for comment.
Thncx so much for this such helpful video! Needed to make sure I had it built or setup correctly!!
The opening space in the bars for a full are supposed to be placed over the existing bar. If that makes sense. They are supposed to fit together for more support.
Thanks for your comment
We can use it for both queen and full modes. If we add the bars part, its size will be bigger and if we do not use it, of course, it will be smaller.
I hope I understood your point correctly and vice versa.
Came back to a video of this bed to make it into a full from a twin setting I have been using. Your comment helped me. It make sense to align the extending bars to the existing bar. And the on with short casing was meant for the middle. Nice. Thanks.
This helped me a lot and also made me look like a caveman lmao
lmao felt the same
Hi, we lost the washers in the move. What kind to ask at Home Depot? Please advise. Thank you.
Hi there.
You can use any washer as long as the diameter of the washer hole is not bigger than the diameter of the screw.
You can take a screw to Lowe's or Menard or Home Depot and get a washer.
Thank you this was a big help
you're welcome.
Please share the channel with your friends .
Thank you your video was very helpful
Thanks Thanks.
It doesn't show what to do with the bar that has the smaller ends
I have this twin bedframe but now I want to extend it to full bedframe. I still have the extension bars.
Cool
I'm sorry, but when you removed the bolts from each end, where you showing that the frame can also be a twin? Otherwise you made this look very easy! thank-you
you're welcome . Merry Christmas
@@ProAssembler Guess what? it is easy! the only thing I suggest is that you allow the mattress lie flat in a warm room! the room I was using was cold, and it it took 3 days for it to fully expand, so I moved it to a warmer room, and it worked out fine! Like dough rising!😁
Where did you get the extension bars? I cannot find it anywhere, it did not come with my twin a few years ago when I got it and now I want it to extend it to a full. Thank you!
Hi Nora.
I did not get it from anywhere. This is a complete package. This link is its full price.
www.walmart.com/ip/Spa-Sensations-by-ZINUS-14-SmartBase-Adjustable-Platform-Bed-Frame-Twin-Full/291460087
I need the spacer bars hot we lost ours in a move .. how do I re purchase them?
Thank you. I echo Truth Holder's assessment.
So basically take the bed frames out turn them upside down open up the two bars underneath the bed put them in the whole take a screw screw it in do it to the other end too go to the other bed frame do the same thing after that put them together take the big screw put it in a hole take a washer put the washer in the middle push it threw the washer into the third hole then take a screw screw that up then do it to the other end that's it now go to sleep there is no need to look at the directions that's a twin for a full don't use the big screws make those two bed frames up then put the six bars you got in the box put them in the middle of the bed to spread it out to make a full that's it any questions ask him or me
Bro thank you so much those instructions where dog water thank you
you're welcome.
Please share the channel with your friends.
Hi sorry to have to ask but how do you disassemble one of these? Like close the legs
Hi .watch 2:40 and revers it
Thanks!
You're welcome.
How do you place the 7th middle rod
That's what I'm trying to figure out. I don't want my son to fall through the middle of his mattress and I don't want it to buckle Underneath Him. I guess I'll put it in the Box in save it
What are size of nuts that are being screwed into the bottom
Hi there .
I do not remember exactly, but I think the size was 6 mm.
The screw thread is also important and I do not know if it was small or large.
I do not know if you have lost all the screws
But if this is the case, be sure to look at the cartoon box again, and if it is just a screw, you know what to do.
Is there one for a queen size frame
www.walmart.com/ip/Spa-Sensations-by-Zinus-14-Metal-Smartbase-Adjustable-Tool-Free-Assembly-Platform-Bed-Frame-Queen-King/796270889
What size are the washers? Mine were missing so want to run to home depot
Hi . use any washer with hole 4 mm
🔥🙌🏿🔥
Mine came with no instruction bag, no nuts, nothing
Hi Nick. Check the box again. Maybe you will find them . Sometimes they hide.
@@ProAssembler Your right. Turned out taped to box
@@nickjimenez4262 very nice .
We lost our spacers to this unit in our move .. making it a king from queen how do I get these spacers ??
Find the customer service phone number and order it.
@@ProAssembler there is not one ☝️ ugghh these days no matter which store if it’s not “ chat” only .. which this company does not have that option but there is an email us comment section but I gave not had a reply to that email
😯
@@joansmith6844so you need a u shape metal to attach both together. Just figure out where you can find a small metal with size between to bed Or order it again 🤔 . Sorry for that.
@@ProAssembler I know was thinking of just ordering it again .. just for those spacers
Not what u mean by U shape?
These spacers are for the middle goes between each twin frame to make / adjust to a king
I’ve looked ever where on line for a dupe or these parts but they don’t exist ..
option 1) order new
2) company contacts me and I’m actually able to just purchase them -& hoping there not expensive
There straight flat metal pieces / having downward teeth that lay flat that go in between the two frames making it a king
@@joansmith6844 😉😉😉😉 I know what you say because I assemble that . I Wana say instead of that piece u can use u shape to fix that. Make something to fix . I think the best option is order but you know it is money. Good luck 🤞
Where do you put the 7th rod? I only see you using 6 when making it a full.
I just found 6 rod in box.
@@ProAssembler oh wow I had 7 hahaha. Thank you for responding!!
@@beybladeshipz you very welcome
@@beybladeshipz your lucky .🙂🙂
I have the same question... I'm just not going to use it
Trying to put this thing together is driving me bananas there's no and I mean no instructions
Take it easy . Work slowly and finish step by step. If you need help, I'm always here
@@ProAssembler thank you so much for your reply I did manage to get it all together but without your help I would have been up the creek without a pattern thank you again
song
I know 😔. It's not my fault. It was copyright music in background and I had to replace it with only music.
He shows the hardware so fast I can't see it. Needs video lessons.
sorry to hear that