I can get the Inductrix to almost bind.. the front two LEDs start flashing white, the rear two are red while the back "taillight" is green. It seems as if it would be bound, except only half of the LEDs are solid. I am using an OrangeRX module in my Taranis. One thing that's weird is, my only option for channels is 1-8 on DSM2 DSMX.. any ideas? thx
Villy, I have watched your video many times and set everything up as you have. I can bind the Taranis Plus/DM9 module but I get no throttle at all. Any suggestions mate? Cheers
Aussie's Multicopter Adventures you have to have the channels in the TAER order. Else it will not work. I made the same mistake on the first Inductrix as Taranis' channel order is different as standard.
Thanks for your reply Villy. I discovered the problem by accident after watching many tutorials and reading many forum posts. Most of the info out there is how to use the Orange TX. I guess it's a lot cheaper than the DM9 module. Anyway, for others having the same issue here is what worked for me. How to bind Taranis Plus with Spektrum DM9 module to Tiny Whoop Set the frequency type to PPM instead of DSM2/X setting per @GenCode FPV in the comments bellow. I also had to bump up the PPM frame from 22.5ms/300- to 22.5ms/450+. It would bind but would not actually do anything. I also set the end point on my throttle, channel 1, to -86 instead of -100. Any lower (more negative) and the throttle has a large amount of nothing and any higher (closer to 0) and the motors don't shut off after landing and puling the stick to full down. I'M NOW WHOOPIN'! Cheers Aussie
![[Live สด] การออกรางวัลสลากกินแบ่งรัฐบาล งวดวันที่ 16 พฤศจิกายน 2567](http://i.ytimg.com/vi/wPd7VFfWHIA/mqdefault.jpg)
![กี่หมื่นฟ้า | Your Sky Series EP.1 [2/4]](http://i.ytimg.com/vi/qJbQs_nhjD4/mqdefault.jpg)
Thanks a bunch. Your videos Are still helping people out. :)
Thanks, I’ll have to use it myself if I got one again 😊
THANK YOU! I could hear you just fine by the way
Thanks, happy you could use it
I can get the Inductrix to almost bind.. the front two LEDs start flashing white, the rear two are red while the back "taillight" is green. It seems as if it would be bound, except only half of the LEDs are solid.
I am using an OrangeRX module in my Taranis. One thing that's weird is, my only option for channels is 1-8 on DSM2 DSMX.. any ideas? thx
I have have used a Spektrum Sender Module and don’t know the Orange module.
u set the - for ail and rudder how many - ?? -100 ??
Villy, I have watched your video many times and set everything up as you have. I can bind the Taranis Plus/DM9 module but I get no throttle at all. Any suggestions mate?
Cheers
Aussie's Multicopter Adventures you have to have the channels in the TAER order. Else it will not work. I made the same mistake on the first Inductrix as Taranis' channel order is different as standard.
Thanks for your reply Villy.
I discovered the problem by accident after watching many tutorials and reading many forum posts. Most of the info out there is how to use the Orange TX. I guess it's a lot cheaper than the DM9 module. Anyway, for others having the same issue here is what worked for me.
How to bind Taranis Plus with Spektrum DM9 module to Tiny Whoop
Set the frequency type to PPM instead of DSM2/X setting per @GenCode FPV in the comments bellow.
I also had to bump up the PPM frame from 22.5ms/300- to 22.5ms/450+. It would bind but would not actually do anything.
I also set the end point on my throttle, channel 1, to -86 instead of -100. Any lower (more negative) and the throttle has a large amount of nothing and any higher (closer to 0) and the motors don't shut off after landing and puling the stick to full down.
I'M NOW WHOOPIN'!
Cheers
Aussie
I have my volume all the way up and I can barely hear you. Speak up
Thanks
can´t you speak louder?
Mr. Inabilidade which part are you missing information from?
Man I can't hear what you're saying lol. Why you make a video if you are scared or shy to talk.
buy a microphone