Now that we have a Procharger on the car, we need the fuel to support it!! 100,000 mile GTR injectors and a new Walbro 255 fuel pump is the answer to this one! Next video SHOULD be the First Start with the new Procharger too so SUBSCRIBE and DON'T MISS IT!!!!!!!!!
I have you, poe, and both of gavins channels on for notifications so I can watch it asap. Which lucifers camo wrap premieres in about 20 minutes from now and I can't wait to see it. Also I love the hit marker you do for the videos.
Daniel.... Congrats on itsjusta6 million subs. I know your whole team work so hard on giving us quality content. And not to take anything away from that but your videos have been fire lately. Thank you
I just found your channel bc after watching Gavin for a while I was like that guy is a real personality. THEN... I realize cal scruby is your intro. Cal was my brother's buddy at OSU glad to see yall fuck with it down there. His best shit (best foot forward) is all unavailable but I have it burned if you're interested.
A little advice when the manifold is off: cover any holes with tape that can directly access the combustion chamber. Last thing you need is dropping something in there without knowing!
I like to stuff napkins or shop wraps online the holes if it’s going to stay off for an extended period of time. For something quick like injectors I’ll leave them open. What I meant by “somewhere you’ll never see them again” I means like behind the engine or elsewhere that’s just hard to reach.
I remember seeing an article at the beginning of the pandemic saying E85 contents would be lower because they are using the alcohol more for hand sanitizer
I don’t know if you checked for a fuel rail pressure valve, you can somewhat controllably relieve fuel pressure, i don’t know if it may not have one but just a tip, love the vids tho keep them comin
I have a bad track record with breaking the top plastic piece off the spark plugs i broke like 3 of them once on my 2003 v6 mustang cause the passenger bank is hard to get to and i wound up tweeking the ratchet enough to snap the plug
Daniel, the black hose that is on your fuel basket is the fuel feed from the other tank. Did you happen to take a drill do your swirl pot? When going to a larger fuel pump you need to enlarge the swirl jet pot. host.cj-motorsports.com/pdf/350z%20Fuel%20Pump.pdf
Did you have to modify the swirl jet on your housing? I kept reading on Z1 says sometimes this is needed? My Z is not boosted so in need stock fuel pressure on mine.
I installed my walbro 255 and when i put the stock fuel filter back on and install it it wouldn’t go all the way down enough for me to put the bolts back on top of the pump! Tried the fuel filter that came with it too it didn’t work either. What could be the problem?
Actually this was something I chose to do on my own because it’s cost efficient AND it will supply the fuel for the little amount of horsepower the car will be making
@@Zorbii i see. i just noticed the similar choices. BTW I really like how you problem solve rather than tapping out immediately. You, Gavin and Poe really help me a lot when I mod my little S10
Daniel i love yalls videos!!! im trying to get gavins rims for the gt350 when yall get the new ones in!!!! guys like this to help Gavin and Daniel to see it!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
@@Zorbii Holy crap I don't think iv ever been replied too on here. well all is good if he ever changes his mind just think of me I'm sure I will still be interested!
Now that we have a Procharger on the car, we need the fuel to support it!! 100,000 mile GTR injectors and a new Walbro 255 fuel pump is the answer to this one!
Next video SHOULD be the First Start with the new Procharger too so SUBSCRIBE and DON'T MISS IT!!!!!!!!!
Here we gooooooooooo
Cant wait to see sum pulls in zoeii
WOO WE GOT 50K
This is f...... awesome bro 🤟🏻
Fuel sending unit assembly
daniel. we *ALL* religiously watch your videos.
I appreciate this
I have you, poe, and both of gavins channels on for notifications so I can watch it asap. Which lucifers camo wrap premieres in about 20 minutes from now and I can't wait to see it. Also I love the hit marker you do for the videos.
He is like the old Gavin
@@Splintervfw1 this is so facts
69 likes it’s legit
The “I wish this was magnetic oh wait it is” was so funny to me
It be like that 🤷🏽♂️😂
@@Zorbii As always
And yes ZORBII the little floaters go in the hole.... zhahahahahaha
This is by far like my favorite intro that any channel I watch has! 💯
Second this
Zorbii deserves so many more subscribers💯
🙏🏼
Yeeyee. A zorbii upload and a gavin upload (in an hour) today just became worth it.
Bro the wrap looks fireeeeeee🔥🔥
@@Adventureswithrednecks shhhh dont spoil it
@@Donovaki22 dont spoil what. It looks fire. He has already seen it
Daniel.... Congrats on itsjusta6 million subs. I know your whole team work so hard on giving us quality content. And not to take anything away from that but your videos have been fire lately. Thank you
Thank you 🙏🏼
It's great to hear someone that sounds like I do when working. Not audibly but vocally.
i had this video open on chrome this morning, and when i watched it, it had 150 views, now i just reloaded it and it has 8k views!! Amazing job G
Thank you 🙏🏼 views have been climbing lately
never gonna get over that intro...
it’s so nostalgic
Darnell be makin a damn dream come true, keep at it man love the damn vids
Much appreciated 🙏🏼
WOOOOO YEAAA BABY FINALLY U UPLOADED IVE BEEN WAITING
at 18:00 daniel just cursed himself with oil out the rear main seal onto the clutch
I’ve been enjoying your videos more than gavins cuz your videos remind me of when I struggle with my cars in the garage
It’s always a struggle
I just found your channel bc after watching Gavin for a while I was like that guy is a real personality. THEN... I realize cal scruby is your intro. Cal was my brother's buddy at OSU glad to see yall fuck with it down there. His best shit (best foot forward) is all unavailable but I have it burned if you're interested.
Fuck yeah dude. DM me on Instagram
A little advice when the manifold is off: cover any holes with tape that can directly access the combustion chamber. Last thing you need is dropping something in there without knowing!
I like to stuff napkins or shop wraps online the holes if it’s going to stay off for an extended period of time. For something quick like injectors I’ll leave them open. What I meant by “somewhere you’ll never see them again” I means like behind the engine or elsewhere that’s just hard to reach.
Oh yeah I totally knew the difference between the fuel pump and that other thing
Keep killing it Zorbii. Super informational installs that are entertaining at the same time.
Maine almost said 💥 when he pulled out the dremel and started grinding around the old fuel pump assembly 😆😆
Legit I've watched almost every one of you're vids love them man I never miss a new one
Darnell always puttin out fire content. Cant wait to see you hit 100k you for sure deserve it!! Also congrats on itsjusta6’s 1 million!
Thank you 🙏🏼
Yessir!! Lowkey in shock that you replied rn😂
🤷🏽♂️ I do that occasionally
I remember seeing an article at the beginning of the pandemic saying E85 contents would be lower because they are using the alcohol more for hand sanitizer
Gavin hit a mill now for you to get 100 thousand and then a mill
Also you know a cars not good unless your car has zip ties
Facts
School made it so I couldn’t watch this immediately. But when I got home and had to choose this or Gavin’s video i did have to choose this.
I Love your Attitude working on Cars!
I don’t know if you checked for a fuel rail pressure valve, you can somewhat controllably relieve fuel pressure, i don’t know if it may not have one but just a tip, love the vids tho keep them comin
Ok so you post at 3:00am for me nice to know
I just put that fuel pump in my 06z I didn't have to cut or file I just worked the clips around one at a time vs all at once
I wonder if the 06 Z has a different OEM pump?
@@Zorbii they are the same I noticed it was bigger to I just hate cutting stuff so I made it work it was still a pain in the ass
I’m not afraid of cutting. Whatever makes it work, I’ll do it 😂
Most underrated youtube. Channel
🙏🏼
I religiously watch all you guys videos including Poe and Nxtshift
When you were searching for that connector for the MAF sensor.. I so felt that. Lmao it happens every damn time I need something
Dude facts
Keep up the good work!! Don't stop the car videos!!!
Hey you may need to upgrade your fuel lines especially if you are gonna run e85. I had to upgrade mine on my G cause the E ate the hose.
Let’s get zorbii to 1 mill subs
THAT PROCHARGER 😩🔥👌 I WANT TO SEE YOU TWIN TURBO YOUR MUSTANG YOU CAN GO AGAINST GAVIN 😂😂😂
darnell your intro is badass i love watching it lol
Can’t wait till the day I’m able to throw some boost at my Z, love this series.
I’m enjoying it a lot too
I have a bad track record with breaking the top plastic piece off the spark plugs i broke like 3 of them once on my 2003 v6 mustang cause the passenger bank is hard to get to and i wound up tweeking the ratchet enough to snap the plug
We need to get this man some lights
Love the boosted vq35
Oh it’s not even done yet 😂
Stock 2012 oem GTR injectors are 560cc,
Fuck. I was close
@@Zorbii I put 600cc injectors on my 370z and then cylinder Fours rod made an expensive exit when I took it to the drag strip
I hope you at least got the injectors cleaned and flow tested before you installed them.
Almost at 60k!!!
"FUCK I forgot the sparkplugs at the office" 😂😂😂😂😂
Love ya Daniel!! In the process of building a turbo Harley Davidson Roadglide!
That’s sick as hell
@@Zorbii Should be sitting around 250-300hp
That will be crazy for 2 wheels
@@Zorbii Its gonna be rowdy.
"I took a strong mental note NOT to forget those spark plugs... And i forgot em'" @me lmfao i live by this 😆😆
Adhd FTW 🙌🏼
@@Zorbii facts 😆😆 i will do like 15 things at once while working on my cars i say its efficiency others say its adhd
Efficiency 😂 that’s perfect
You should get a cheap head lamp for hands free under car work! Works so good!
I LOVE how you just...do shit. Sure, it takes longer, but seeing the trial and error makes it entertaining
I love the trial and error that goes into it
Next is Darnell to 100k!
Put some Diode Dynamics LEDs on the inside of PayDay
DARNEL WHY YOU SO GOOD AT EVERYTHING
Because I know de wae
Daniel, the black hose that is on your fuel basket is the fuel feed from the other tank. Did you happen to take a drill do your swirl pot? When going to a larger fuel pump you need to enlarge the swirl jet pot. host.cj-motorsports.com/pdf/350z%20Fuel%20Pump.pdf
When do u think ur gunna finish the build and how many miles does ur engine have?
I have no idea how many miles the engine has. It came from JDM California out of a junk car.
I need more Zorbii😭 I just moved into a house and my dad was not kidding when he said your first year will mostly be at the house I’m BROKE ASF🤣
You planning to add a wing like gavins on payday? Would look sick
Not 100% sure what I’m gonna do yet
@@Zorbii bro you quick with the replys.
Take a minute for yourself haha
So you’re telling me I have to count to 60 before I can respond? 🧐
Yes.. Its wierd to immediately respond.
The notification sound can be ignored initially.
I actually have the tones turned off lol you just commented at a convenient time for a fast response 😉😘
What’s ur intro song it’s fye
Ooooh love the vids seems like u gaind around 2 k subscribers since the last vid keep it up
I’m trying 🙏🏼
What steering wheel do you have?
Love the videos bro ! Wish you nothing but success
>Gavin, getting case upon case of SK tools
>Daniel, using the same 1/4in Harbor Freight ratchet for the last 5 years
Where’s that SK tools sponsor at?
🤷🏽♂️
Of course I religiously watch your videos danny😂
Loving them videos! Keep them coming.
Will do 💪🏼
What's the name of intro song
You should upload more fr!
Bro no homo but that Dr. Squatch making your hair look clean!
I love it 🥰 use code ZORBII20 and try it yourself
Did you have to modify the swirl jet on your housing? I kept reading on Z1 says sometimes this is needed? My Z is not boosted so in need stock fuel pressure on mine.
What you see on here is what I did. If I have anything special that I have to do I make sure to mention it on camera
@@Zorbii thanks man I'll swap it as usual then. 🤙
yessss, i was waiting this one! hell yeah
Have a good day Zorbii
I installed my walbro 255 and when i put the stock fuel filter back on and install it it wouldn’t go all the way down enough for me to put the bolts back on top of the pump! Tried the fuel filter that came with it too it didn’t work either. What could be the problem?
Have you tried pushing it down do the springs compress?
Also, dm me on IG so I can get pictures
What’s your intro song called?
Faster - Cal Scruby
“I wish this was magnetic... oh wait it is” nice zorbii nice
Thanks 😊
@Zorbii i think you watch hi low cause you got the same fuel system as Nolan's Z
Actually this was something I chose to do on my own because it’s cost efficient AND it will supply the fuel for the little amount of horsepower the car will be making
@@Zorbii i see. i just noticed the similar choices. BTW I really like how you problem solve rather than tapping out immediately. You, Gavin and Poe really help me a lot when I mod my little S10
I enjoy a challenge lol it makes the success so much more rewarding
who would dislike this this beautiful lucius mans video...
how disrespectful 🤦♂️
Facts
@@Zorbii facts facts triple the facts
As a guy from Pittsburgh I can confirm Pittsburgh aren’t the best but they work and a lot of the ones I use are lifetime but yes they wear out quick
I love the tools for the price, the 1/4 ratchet is the only tools that’s given me issues
Hey what’s the intro song?
Faster - Cal Scruby
For y'all that are new we are getting secretly paid to watch his channel so technically religiously
What is that intro song? :D
Faster - Cal Scruby
Darnell saving the day
Been sitting in a shitty humvee all day this made it much more bearable😂🙏
What’s the intro song
wap
What’s the into song
Faster - Cal Scruby
Love you man you and gavin love you
Intro music please someone tell me name
Faster - Cal Scruby
@@Zorbii Omg Thanks bro.. I love you and all the a6 fam..
I'm so excited to see a first start and see what color that oil is😂 but im pretty sure we're all religiously watching, I know I am
Lol oil is a little brown 😅
Love watching these vids lmao so good 🤣🤣
Thank you 🙏🏼
the z is amazing
Thank you 🙏🏼
Why don’t you use sk tools
The tools I have get the job done 🤷🏽♂️
That item at the start of the video could so be called a sending unit
Yeah that’s true 🤷🏽♂️ there’s a lot of names that fit
Procharged DE vs fbo Tune HR ik the de will win but will be an interesting video nevertheless
Agreed. If I find one I’ll def race it
I love your intro
Hell ya brother keep up the vids always watch and like vids
Almost got copyrighted 😭 but I love that song
Please start covering up those intake ports lol
well now he can say hes got an procharged 350z with 2 neutral gears
Lol facts
I'm early to a video finally
Who doesn’t watch darnells videos religiously
Daniel i love yalls videos!!! im trying to get gavins rims for the gt350 when yall get the new ones in!!!! guys like this to help Gavin and Daniel to see it!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Gavin actually planned on keeping the stock wheels to use as a set of race wheels for if we go to the track in the future.
@@Zorbii Holy crap I don't think iv ever been replied too on here. well all is good if he ever changes his mind just think of me I'm sure I will still be interested!
I wanna know what killed rob in the intro
Dude i couldn’t watch how u gaped the sparkplugs🙄
Using the feeler gauges? 😂
@@Zorbii no, pushing the electrodes back into the spark plug...that’s how i blew up my motorcycle engine...