@@romeroc24 I want to contact with you if you don't mind I worked now in Saudi Arabia 009660508026771 This is my phone I hope to see your message on whatsup hope to be freinds Thank you
20:53 Hello, thank you for your video When I go to the IoT Monitor in the laptop and write the IoT Server add 10.0.0.253 , it doesn’t show the Registration Server login. I get the ( Use the IoT monitor APP to manage IoT Devices) sentence . I can’t see the devices just this screen.What is the problem?
Thanks for this tutorial. This is a great lecture of packet tracer 7.1 with iot environment. I have done all of this as in video. Everything is working proper. I want to use VPN and access list to avoid incoming traffic or to avoid unknown wireless mobile Ip's. What should i do ? where i have to add new router, and on which router VPN and access list will be implemented. I shall be thankful to you for your kind reply waiting for reply.
hi, not sure if you still remember this video or not I want to use 2 clouds instead of just 1 so I used the 829 router instead of 2911 because it has more gigabit ports I was wondering if that causes any problems along the way or maybe it does not have to gigabit port, if not what other router do you suggest ? is fasethernet the same ? thank you whatever you reply with, but I hope there is a solution to my problem
Hello my friend, you can add routers and use more ethernet interfaces, but the main key is that you need to know perfectly the items of addressing and routing, otherwise you will have problems
Hi Christian. Great video. i wonder how we can apply standard access control list on ISP to act as a firewall for any unwanted incoming traffic. can you help me on that please?
Thank you for your nice lecture. I have a question. Packet Tracer version 7.0 is being used, but Wi-Fi is not detected. How many versions can I use to catch wireless?
I did another project using ipv4 when I enter the simulation mode the packet track Starting from iot server to gateway and then to all iot devices the wrong mark appear on all devices only one device from it appear right mark and this situation repeated in the next time i do simulation what this means? Can you explain please?
Thanks for the video. In the last part, when I check the house and enter it with the hostname, I get the" host name unresolved error". Can you help me?
Hola, tengo una pregunta. ¿Por qué desde la laptop puedes hacer ping a la dirección 10.0.0.254 correspondiente al servidor IOE? Si tenemos en cuenta que la dirección 10.x.x.x es privada del router ISP, y que en el enlace existente entre el home gateway y el router ISP existe un direccionamiento público, entonces, ¿Cómo es posible que la laptop pueda acceder a la dirección IP privada de un router externo sin haber hecho antes NAT estático en el ISP, es decir, traducir la dirección 10.0.0.254 a una pública, para que así sea posible acceder al servidor externo desde la laptop? Creo que otra solución habría sido con un tunel vpn, pero no estoy seguro. Con el smartphone igual... Haciendo ping a una dirección privada del ISP... Nunca hubiese llegado a pensar que todo eso fuese posible... Me ha dejado impactado... Ojalá pudieses explicarme qué me estoy olvidando... Gracias
@@romeroc24 sin configurar Nat ni vpn? Si yo intento hacer ping a una dirección privada de un usuario de otro router, necesitaré una ip publica y el puerto correspondiente. Es imposible hacer ping a una dirección privada externa sin haber configurado nada. Entonces, ¿cual es la diferencia entre esto y hacer ping a una ip privada del isp? Te lo agradecería mucho, porque o es algo que desconozco de una conexión usuario - isp o me la quieres colar...
@@romeroc24 podría por favor responderme de una forma adecuada y argumentada cuando tenga más tiempo libre? Puedo esperar días o incluso semanas, pero de verdad me gustaría saberlo porque no sé qué concepto debería repasar exactamente... quizá sea un concepto de CCIE, porque se CCNA no creo...🤣
Hi If we want to implement a secure network for the home with 2 floor What we must to add? and how many of each ?? switches Routers Servers Home Gateway Pc Phone cable modem ..
it was really a nice contribution, but the quality of the video is not good, if u have another video with a better clarity pls share it. thanks again for your contribution
Hello, I am facing a problem. My Home Gateway and Central Office are getting the IP addresses from the DNS server properly. But when pinging from the laptop (time 19.42 in this video), the ping is not working. It's showing a 100% packet loss. I appriciate your response.
@@romeroc24 Thanks, brother. It worked actually. I did a fresh start. And it's working perfectly now. I think my routing had an issue. I want to add some sensors and actuators connected with the MCU board. If there is no problem can you help me out?
Hello there, the video was very helpful so thank you for that! Yet I have a problem. I've done everything as you tell. When I ping the server using its IP, it works, but when I give it a name on DNS-Server it does not reach the address. Do you have any recommendations how to solve this?
Hello, the DNS is failing, check the DNS IP on PCs and devices and check if the DNS server is very well configured, and verify is PCs are able to reach the DNS server with ping.
@@romeroc24 Thanks for your answer, in fact I couldn't ping it, the request was always timed out. Even though I didn't change any settings, I only turned the DNS Service off then switched it back on again and it worked! :D
@@romeroc24 Thank you for replying! Currently using version 13, when I pinged or use the web address it's destination unreachable and unresolved host name, I've setup the DHCP on router like the video with my own excluded IP addresses and the CELL network, is it possible for me to send my pkt file and for you to review it?
It will be interesting how to protect this project?? Can you tell please, fierwall is good decission for this smart home? What can I use to protect IoT in packet tracer??? Helm me please...
Very interesting question, you can use ACLs (Access Control Lists) on the routers, also you can use Cisco ASA Firewalls, these videos area examples th-cam.com/video/5adruQ8haK8/w-d-xo.html th-cam.com/video/oDeAXd150rM/w-d-xo.html
@@romeroc24 thank you very much! I realy enjoy your video, I study in 4 course, my speciality is cybersecurity and my final project is IoT protection. I realy find this topic interesting. Thank you so much for your video !)))))))
@@romeroc24 is it real to create vpn beetwen smartphone and router ( I replace modem to router, confirure router how vnp server, but, unfortunanly, cell Phone doesn connect to vpn(((( i try to connect pc to switch - isp router, and pc connects to the vpn. Why smartphone does not connnect????
What u put like addresses,getway and dns on the server of dns and ioe? I tried it my central office got an address outside the pool the home getway also I put for central office 209.165.201.225. 209.165.201.230 and i found 201.231 and about homegetwya i puted 209.165.200.225 209.165.200.231 and i found 200.231 Why?? Plz answer me
you can use any public address that you want, this is only an example, you need to be skilled on addressing and vlsm, a very important thing is the subnet mask
Awesome video, very helpful. One problem I ran into though is near the end, I cannot access the IoE server using the address www.ioe.org on the Smartphone. However, I can access it on the laptop. I also verified and my smartphone can ping both the IoE server and the DNS server, just for some reason whenever I try accessing my IoE server with the URL instead of the address on the phone it says host name unresolved.
so I did as you said, I connected the devices with the switch and the switch with the router and then configured dhcp on the router and it worked , but laptop doesn't ping the ioe server and dns server. what should I do?
hey christian...something wrong with my phonei try to email you the files but its not working. I upload it on youtube....the title is "Help me please christian packet tracer project"
@@romeroc24 hi i followed the exact same steps but when it comes to the last part of router configuration with the WAN its not configuring and not showing any DHCP values in the homeGateway
Thank u so much,I'm student from VN and this video is so helpful with to complete my individual project
Thank you for all your support my friend!
Very good job, i always watch your videos and i would like to thank you for the efforts you make.
please make more videos about IOT. Good luck
Thank you for all your support
OK I will
Great explanation, everything works. Thank you!
I appreciate your comment, thank you
Thank you so much. Because of this video I was able to make my project before deadline. Everything went perfect.
I appreciate your comment, thank you thank you
Bro did u make as it is ,did u submit any report?
@@khyathinandankumar5219 I had to make IoT based small project so I followed the whole video step by step.
Which version did u use?
@@khyathinandankumar5219 cisco packet tracer 7.2
thank you from Egypt
you are my best instructor
Thank you for all your support, from Perú
@@romeroc24 I want to contact with you if you don't mind
I worked now in Saudi Arabia
009660508026771
This is my phone
I hope to see your message on whatsup hope to be freinds
Thank you
My whatsapp is +51931033196
Thank you for your great video please do more IOT video explaining
Regards
OK I will I promise
thank you I really needed this, thank god I found it
Thank you for all your support my friend!!!
20:53 Hello, thank you for your video
When I go to the IoT Monitor in the laptop and write the IoT Server add 10.0.0.253 , it doesn’t show the Registration Server login. I get the ( Use the IoT monitor APP to manage IoT Devices) sentence . I can’t see the devices just this screen.What is the problem?
this is a connectivity problem, please verify if the network has converged first
Admirável o seu site, e o material disponibilizado de alta qualidade. Parabéns e sucesso.
Thank you for all your support, thanks again
Thanks for this tutorial. This is a great lecture of packet tracer 7.1 with iot environment.
I have done all of this as in video. Everything is working proper. I want to use VPN and access list to avoid incoming traffic or to avoid unknown wireless mobile Ip's.
What should i do ? where i have to add new router, and on which router VPN and access list will be implemented.
I shall be thankful to you for your kind reply
waiting for reply.
thank you
hi, not sure if you still remember this video or not
I want to use 2 clouds instead of just 1 so I used the 829 router instead of 2911 because it has more gigabit ports
I was wondering if that causes any problems along the way
or maybe it does not have to gigabit port, if not what other router do you suggest ?
is fasethernet the same ?
thank you whatever you reply with, but I hope there is a solution to my problem
Hello my friend, you can add routers and use more ethernet interfaces, but the main key is that you need to know perfectly the items of addressing and routing, otherwise you will have problems
Great video as always, in currently watching 2.4.3.4
thank you for all your support and good comments!
Hi Christian. Great video. i wonder how we can apply standard access control list on ISP to act as a firewall for any unwanted incoming traffic. can you help me on that please?
You can use these videos as reference
th-cam.com/video/5adruQ8haK8/w-d-xo.html
th-cam.com/video/Sus9fMUFMU4/w-d-xo.html
is it possible to connect two cell towers between them
Thank you for your nice lecture.
I have a question. Packet Tracer version 7.0 is being used, but Wi-Fi is not detected.
How many versions can I use to catch wireless?
Please configure devices with an interface to support WiFi, like the Ip camera
WRT300N connection is required, but HomeGateway does not seem to be available. Could you send me the installation file?
Please only follow the step by step tutorial at detail, again
Which step should I take first?
Start from 3:00
I did another project using ipv4 when I enter the simulation mode the packet track Starting from iot server to gateway and then to all iot devices the wrong mark appear on all devices only one device from it appear right mark and this situation repeated in the next time i do simulation what this means? Can you explain please?
please send me the files using social media shown in 00:03
which version of packet tracer are u using ??
coz mine 8.2.1.0118 some of end devices are unavaLABLE
Use 7.2, 8.0, 8.1, thank you
Can you give brief description of this project about 6-7 lines
This IoT project permit get information and the remote control of Things
Thanks for the video. In the last part, when I check the house and enter it with the hostname, I get the" host name unresolved error". Can you help me?
this is a connectivity problem, please verify if the network has converged first
Muy buen video, lo explicas muy bien, Saludos!!!
gracias por todo tu apoyo
Tendrás algún video tutorial de "Presenteacion de topología empresarial"?
que requerimientos tiene?
Hola, tengo una pregunta. ¿Por qué desde la laptop puedes hacer ping a la dirección 10.0.0.254 correspondiente al servidor IOE? Si tenemos en cuenta que la dirección 10.x.x.x es privada del router ISP, y que en el enlace existente entre el home gateway y el router ISP existe un direccionamiento público, entonces, ¿Cómo es posible que la laptop pueda acceder a la dirección IP privada de un router externo sin haber hecho antes NAT estático en el ISP, es decir, traducir la dirección 10.0.0.254 a una pública, para que así sea posible acceder al servidor externo desde la laptop? Creo que otra solución habría sido con un tunel vpn, pero no estoy seguro.
Con el smartphone igual... Haciendo ping a una dirección privada del ISP...
Nunca hubiese llegado a pensar que todo eso fuese posible... Me ha dejado impactado... Ojalá pudieses explicarme qué me estoy olvidando... Gracias
Es necesario revisar los conceptos de direccionamiento y routing, porque es posible completamente
@@romeroc24 sin configurar Nat ni vpn? Si yo intento hacer ping a una dirección privada de un usuario de otro router, necesitaré una ip publica y el puerto correspondiente. Es imposible hacer ping a una dirección privada externa sin haber configurado nada. Entonces, ¿cual es la diferencia entre esto y hacer ping a una ip privada del isp? Te lo agradecería mucho, porque o es algo que desconozco de una conexión usuario - isp o me la quieres colar...
@@miniclipVideos si es posible hacerlo
@@romeroc24 podría por favor responderme de una forma adecuada y argumentada cuando tenga más tiempo libre? Puedo esperar días o incluso semanas, pero de verdad me gustaría saberlo porque no sé qué concepto debería repasar exactamente... quizá sea un concepto de CCIE, porque se CCNA no creo...🤣
Hi
If we want to implement a secure network for the home with 2 floor
What we must to add? and how many of each ??
switches
Routers
Servers
Home Gateway
Pc
Phone
cable modem
..
thank you, only add a new switch on home, one switch per floor
Which packet tracer version is this? I've this instructors version which was free and doesn't have home gateway device
7.0 version and 7.1
it was really a nice contribution, but the quality of the video is not good, if u have another video with a better clarity pls share it. thanks again for your contribution
Thank you for all your support, please set the quiality to 720 or more
Hello, I am facing a problem.
My Home Gateway and Central Office are getting the IP addresses from the DNS server properly. But when pinging from the laptop (time 19.42 in this video), the ping is not working. It's showing a 100% packet loss.
I appriciate your response.
Are you using the same home router like me? Please review routing configuration
@@romeroc24 Thanks, brother. It worked actually. I did a fresh start. And it's working perfectly now. I think my routing had an issue.
I want to add some sensors and actuators connected with the MCU board. If there is no problem can you help me out?
@@ArefinSourav not problem, contact me using social networks shown on 00:03
@@romeroc24 Thanks a lot. I have texted you on Facebook.
@@ArefinSourav OK, thank you
Can I convert this project to dot exe file format in Cisco Packet Tracer? I would be happy to tell you how it can be done if possible.
this video shows you all step by step
Fantastic Work Christian
Thank you for all your support
How to get back the original index.php file back? If it's not possible can you send the php code of the same?
please if you can specify your question
Hello there, the video was very helpful so thank you for that!
Yet I have a problem. I've done everything as you tell. When I ping the server using its IP, it works, but when I give it a name on DNS-Server it does not reach the address. Do you have any recommendations how to solve this?
Hello, the DNS is failing, check the DNS IP on PCs and devices and check if the DNS server is very well configured, and verify is PCs are able to reach the DNS server with ping.
@@romeroc24 Thanks for your answer, in fact I couldn't ping it, the request was always timed out. Even though I didn't change any settings, I only turned the DNS Service off then switched it back on again and it worked! :D
@@trilliangalax6055 very nice , ver good
Hello sir, what should I do if the smartphone cannot ping to the gateway IP or the servers? Thank you for the video
please review you are using the same version of packet tracer like this video and verify the configuration of the CO Cell Server
@@romeroc24 Thank you for replying! Currently using version 13, when I pinged or use the web address it's destination unreachable and unresolved host name, I've setup the DHCP on router like the video with my own excluded IP addresses and the CELL network, is it possible for me to send my pkt file and for you to review it?
@@yurifan2537 ok please contact me on social networks shown on 00:03 and send me the file
It will be interesting how to protect this project?? Can you tell please, fierwall is good decission for this smart home? What can I use to protect IoT in packet tracer??? Helm me please...
Very interesting question, you can use ACLs (Access Control Lists) on the routers, also you can use Cisco ASA Firewalls, these videos area examples th-cam.com/video/5adruQ8haK8/w-d-xo.html th-cam.com/video/oDeAXd150rM/w-d-xo.html
@@romeroc24 thank you very much! I realy enjoy your video, I study in 4 course, my speciality is cybersecurity and my final project is IoT protection. I realy find this topic interesting. Thank you so much for your video !)))))))
@@МаринаМальцева-з2я I'm glad to help you, thanks to you
@@romeroc24 is it real to create vpn beetwen smartphone and router ( I replace modem to router, confirure router how vnp server, but, unfortunanly, cell Phone doesn connect to vpn(((( i try to connect pc to switch - isp router, and pc connects to the vpn. Why smartphone does not connnect????
@@МаринаМальцева-з2я you can do the following th-cam.com/video/8uWmFkrn6qE/w-d-xo.html
Sir at the end of project u have not shown any working of the project can u plxx show us the end of the project that will be ur most kindness thnku
From 21:44 I'm showing all functionality, or what do you need?
@@romeroc24 I have send an email can u plxx check it out
@@paraonearthkashmir715 OK
Plz me too
Errotbinouhaila1998@gmail.com
can we check the jitter, delay or performance paramter using Packet tracert? Thank You
really not, but there are a fictitious parameters that you can see using ios commands, but is better on gns3 and is correct in a real lab
is gns3 support iot?
what do you mean about ios command?
Gns3 does not support iot but support servers and apps
thank mr, i found good website about iot simulator, telcoconsultant.net/viewtopic.php?f=24&t=967&sid=eb23e0fc218f3fb7b1d8d73700698693
Hello.. how can add MCU to home topolgy and using python programming for ioe devices
this is the video th-cam.com/video/tcZizNCw4TM/w-d-xo.html thank you
Big thanks 👍
What u put like addresses,getway and dns on the server of dns and ioe?
I tried it my central office got an address outside the pool the home getway also
I put for central office 209.165.201.225. 209.165.201.230 and i found 201.231 and about homegetwya i puted 209.165.200.225 209.165.200.231 and i found 200.231
Why??
Plz answer me
you can use any public address that you want, this is only an example, you need to be skilled on addressing and vlsm, a very important thing is the subnet mask
Brother can you pls help me with this confusion, smart device in street is what in terms of real world? is it using for a modem or what... thnx
smart device is a 3G or 4G LTE smartphone that connects to cell (tower)
Fabulous video but when I tried last part smart phone can't browse the site can u plz help with it
please be careful in every step on the video, I don't have specifications or details but any help to romeroc42@gmail.com
hi can you please make tutorial incubator with (MCU, sensor temperature, heating element cooler and humidity sensor) in blockly program
I will do that this week please give some time
Christian Augusto Romero Goyzueta thank mr, can you send to my email? martintune26@gmail.com
I will try to do it as soon as possible and publish it online
is it possible to connect two cell towers between them
Good questions, I think is possible and I will try to do a video
When I ping IOE and DNS servers through Laptop, it Request time out.
Can you help with that.
Thanks
please verify ip addressing in routers and static routing
When I ping to DNS and IoE server always RTO,Why?
Please verify the addressing and routing on your network. Use traceroute or tracert to verify the connectivity
One doubt bro while connecting homegateway to siren im getting only d0 no ethernet is showing what to do
How did u resolve this?
Awesome video, very helpful. One problem I ran into though is near the end, I cannot access the IoE server using the address www.ioe.org on the Smartphone. However, I can access it on the laptop. I also verified and my smartphone can ping both the IoE server and the DNS server, just for some reason whenever I try accessing my IoE server with the URL instead of the address on the phone it says host name unresolved.
configure the dns server on the ip configuration
@@romeroc24 Omg thanks it worked!
@@cloudybrains very good!!!
Could you please explain how you fixed it
@@amaasare537 Unfortunately I cannot, I haven't touched this stuff in 3 years!
Thank you very much :)
You're welcome!
Uy creo que esto me da una idea de cómo hacer una simulación de un CCTV IP. Tendrás algún vídeo así o una sugerencia.
Gracias!!
puedes usar cámaras, saludos
Pero no hay camaras en cisco packet tracer, o hay alguna forma de anexarlas?
@@almabuendia7394 si hay cámaras en packet tracer 7.2.1
@@romeroc24 Mmm tengo ese, pero no las encuentro, en dispositivos terminales? O donde?
@@almabuendia7394 End Devices - Home
Very well done
Thank you very much!
Hi sir
May I have this topology after you completed Please ..
Thank you
I don't have the file, you can follow all the video to create your own file
Just wanna ask. I've already followed the instructions but my smartphone can't ping or access the internet. Can you help me sir 🥺
PLease try to do all again, and if fails again send me the file using social networks
smartphone cannot ping 10.0.0.254/253 ( both servers)..and smartphone cannot login to IOT monitor(request timed out) pls help
this is a problem on Routing configuration
thnx sir i need presentation regarding this project can u sent pdf file sir
my email is romeroc42@gmail.com, you can request it
can you please give this project as link to download it...??
is necessary start from a blank file
thanks
Thank you for all your support
i like it!!
thank you!
thanks to you
but what if I want to set up a VPN? can you tell me please
Change the home gateway for a 2911 router then configure the vpn like this th-cam.com/video/VMB7TUrpZok/w-d-xo.html
okay, thank you very much
Do I need to physically connect the 2911 router with home devices and configure IP addresses on each interface ?
use a switch to connect all lan devices and configure a dhcp server on the router to avoid the static configuration in all devices
so I did as you said, I connected the devices with the switch and the switch with the router and then configured dhcp on the router and it worked , but laptop doesn't ping the ioe server and dns server. what should I do?
Thaks al ot mate
Thank you my friend, I appreciate it
can you help me on my project?ospf,hsrp, and etherchannel
my email is romeroc24@gmail.com
ok i will scan the lab i really appreciate it.
hey christian...something wrong with my phonei try to email you the files but its not working. I upload it on youtube....the title is "Help me please christian packet tracer project"
send me the link or send me the email to romeroc24@gmail.com
At the end of this page there is a link called OSPF ... that is the solution techemergente.blogspot.com/p/ccna-routing-and-switching-curso-gratis.html
excelente tutorial amigo
gracias, saludos a la distancia
problem in account regstration please help me
the video can tell you all, but the routing is very important to get all the networks connected
great project
thank you for all your support, I appreciate
I am student and I want to make a project home automation
OK not problem I can help you romeroc42@gmail.com
@@romeroc24 thanks alot
Hi, I need a help brother
OK
thanks for the video
thank you for all your support
Nice one!!!
thank you
cool
Thank you for all your support, thanks again
sangat bagus
Terima kasih. Thank you
CAN I GET THIS FILE
please follow the steps on the video, because I don't have the file
@@romeroc24 hi i followed the exact same steps but when it comes to the last part of router configuration with the WAN its not configuring and not showing any DHCP values in the homeGateway
Thats the reason its not also showing the DNS server values in laptop's ip configuration
@@brogaming5915 send me your file using social media shown in 00:03
@@romeroc24 yes please kindly check your Gmail
Need the pka file Please
I'm sorry I don't have the file
I have send am email again plz check that
ok
Can u plxx help me
ok, I will do it by email
.pka
is necessary start from a blank file
Yes I finished ... Thanks bro
kali linux can you give me the .tpl file?
bro send me your file to raviranjanbihar667@gmail.com