Hallo, nein geht mit der Maschine nicht, keine Hohlboden und Hohlspitzgeschosse können mit der Maschine hergestellt werden. Bin gerade dabei eine Maschine für den Lyman Slug zu bauen, wird aber noch einige Monate dauern bis die fertig wäre. Hier meine Mail, kannst dich dann Informieren sandmann0512@gmail.com Gruß Stephan
Hi, yes you can buy the machines. I build these machines. You can get more information at this email address. sandmann0512@gmail.com See you then and greetings Stephan
I can give you more information, write me an email. Here is my email address. sandmann0512@gmail.com How and whether this can be sent to the Philipines must then be clarified. Will be expensive. Greetings Stephan
Hi, very no chevrons and weights, if there are molds for the machine I can not say. There must be special molds for casting machines, others do not go. Can you also report by mail.
@@sandmann0512 I may or may not be entering into ammunition manufacturing business & was wondering if you can configure it in bigger calibers such as in assault rifles & Dmrs. By the way what will be its cost.
@@randomdudewalkingdownthest8158 Hi, it has to work, it is also possible with other machines of the same type. If there are corresponding double molds, it would be worth a try. The price - not on YT. Here is my contact address: sandmann0512@gmail.com Greetings Stephan
Hello, you can buy the machine from me, I can give you the price, but not here. My email adress: sandman0512@gmail.com Sign up there and you will get information
Bonjour, je ne parle pas français, veuillez m'excuser si je fais des erreurs.Oui, je peux vendre la machine à un ami. Si vous voulez plus d'informations, voici mon adresse mail. sandmann0512@gmail.comCordialement Stephan
Hi, unfortunately I can't tell you the price here. Here is my email address: sandmann0512@gmail.com Just report, then I can give you the price. Greetings Stephan
3D machine design is willing to sell, or machine turning mechanism for import reasons, i know it will be very difficult to import from you, so i would like to manufacture my own machine. I also cannot say how and if transport to Brazil is possible, it will be very expensive.
Hi, excuse me, have the request only now seen. I build these machines for lead bullets. If this information needs my mail address here. sandmann0512@gmail.com
Hello, have searched everything in the mailbox, have not found any mail from you. Here is my email address, please try again, if it doesn't work, report back. Mail address: sandmann0512@gmail.com Greetings Stephan
Hello, no, nothing has arrived yet, that's very strange, you haven't received my mail. I answered you right away yesterday. Perhaps your email will still arrive today with a little delay. I don't know why, I get emails from all over the world. there are no problems here. Let's wait and see.
@@Terkinmsk Hi, you can also reach me on Whatsapp. +49 176 50261924 Hello, no, nothing has arrived yet, that's very strange, you haven't received my mail. I answered you right away yesterday. Perhaps your email will still arrive today with a little delay. I don't know why, I get emails from all over the world. there are no problems here. Let's wait and see.
As a mechanical engineering student, I applaud your work. Well done.
Oh, thank you very much for the praise, it was a lot of work until then
@@sandmann0512 do you still sale this machine?
Hello Tim, yes I build these machines and sell them.
Here is my email address for information.
sandmann0512@gmail.com
Greetings Stephan
Do you still sell this machine ???
Wooow, it's amazing! And look perfect of all I saw in YB on this theme of automatization casting.
Hi, thank you very much for the praise
BRAVO! BELLA MACCHINA
Grazie molto
this is art.
++Thanks ++
Thank you, it was a lot of work until then.
@@sandmann051213 projects lol don't hate me now lol
Nice work
Sorry for not getting in touch until now.
Thank you, it was a long way to go.
This is awesome! If you dont mind saying, what was total cost of building? Would you be willing to sell the plans?
Hello, thanks for the praise, I do not announce prices on YT and I do not give drawings.
Can the dies be changed for fishing sinkers
Please excuse me, no that is not possible with the machine, only bullets can be produced. Greetings Stephan
I like that
What’s the cost?
Are you making these machines? What country and what is your website? Who's molds do they take, Magma or Ballisticast?
Yes, I build these machines, Germany for magma molds.
Question, 3 phase power only or is single phase an option ?
Hi, it works much better with three phases.
For a phase with a frequency converter or only for machines with 4 molds. 1 phase is not that good.
Hallo kann man damit auch 525 gr Lyman Slugs herstellen ? Die Kokille ist aber 3 teilig
Hallo, nein geht mit der Maschine nicht, keine Hohlboden und Hohlspitzgeschosse können mit der Maschine hergestellt werden. Bin gerade dabei eine Maschine für den Lyman Slug zu bauen, wird aber noch einige Monate dauern bis die fertig wäre. Hier meine Mail, kannst dich dann Informieren sandmann0512@gmail.com Gruß Stephan
Is it still available to buy?
Hello, yes I still build these machines and sell them. My email adress:
sandman0512@gmail.com
Greetings Stephan
It’s available to buy?! Where can I get more information?
Hi, yes you can buy the machines. I build these machines. You can get more information at this email address.
sandmann0512@gmail.com
See you then and greetings Stephan
How much are they
How to order this equipment? I'm Philipines
I can give you more information, write me an email. Here is my email address.
sandmann0512@gmail.com
How and whether this can be sent to the Philipines must then be clarified. Will be expensive. Greetings Stephan
@@sandmann0512 I already sent you an email earlier.. Thankyou..
show machine would like to know sells the project to manufacture this machine in brazil
Yes, I'm selling, but how am I supposed to deliver the machine to Brazil, that's a big problem.
@@sandmann0512 apenas o projeto da maquina
just machine design because I can't import this type of machine
can do pellet air rifle like jsb whit this machine¡?
Hi, do not really answer the question, that makes bullets. Pellet for air rifle, what a caliber and bullet weight.
@@sandmann0512 82 grain in caliber 9mm AND 50 grain in cal 30 Air rifle
Hi, very no chevrons and weights, if there are molds for the machine I can not say. There must be special molds for casting machines, others do not go. Can you also report by mail.
So what calibres can be made using this machine.
Hi, with this machine all handgun calibers can be made, including round bullets. Bullets with or without lube.
@@sandmann0512 I may or may not be entering into ammunition manufacturing business & was wondering if you can configure it in bigger calibers such as in assault rifles & Dmrs. By the way what will be its cost.
@@randomdudewalkingdownthest8158 Hi, it has to work, it is also possible with other machines of the same type. If there are corresponding double molds, it would be worth a try. The price - not on YT.
Here is my contact address:
sandmann0512@gmail.com
Greetings Stephan
@@sandmann0512 4:05
I want to buy , and the price
Hi, I do not announce any prices here.
Here my email address:
sandman0512@gmail.com
If you want more information, just let us know.
Where can I buy it and how much
Hello, you can buy the machine from me, I can give you the price, but not here.
My email adress:
sandman0512@gmail.com
Sign up there and you will get information
Then copper then felt? Is that why they man who helped mobeen got beat up?
Hi, here is my email address sandmann0512@gmail.com
what is the tariff custom for export?
I can't say it depends on the country where the machine is being delivered.
bonjour je voudrais s'avoir si vous vendez cette machine a coulé un ami serrais preneur
Bonjour, je ne parle pas français, veuillez m'excuser si je fais des erreurs.Oui, je peux vendre la machine à un ami.
Si vous voulez plus d'informations, voici mon adresse mail.
sandmann0512@gmail.comCordialement Stephan
hi
price this project?
Hi, unfortunately I can't tell you the price here.
Here is my email address:
sandmann0512@gmail.com
Just report, then I can give you the price.
Greetings Stephan
Is this for sale ?
Hello my friend, yes I build and sell these machines, here my mail, if you should be interested.
sandmann0512@gmail.com
Nice machine, I sent you an email
Hi, I'll answer you by email today
How much?
Hi, not on YT.
Here is my email address, you can ask.
sandmann0512@gmail.com
@@sandmann0512 how much for a setup like this ritter@blomand.net
3D machine design is willing to sell, or machine turning mechanism
for import reasons, i know it will be very difficult to import from you, so i would like to manufacture my own machine.
I also cannot say how and if transport to Brazil is possible, it will be very expensive.
qual valor desse projeto para fabrica minha propria maquina no brasil
Is this price
Hi, I'm not writing about a price here, sorry.
If you want a price or information here my email address.
Sandmann0512@gmail.com
Greetings Stephan
Hey. we want to buy this equipment. If you sell it, send you contact.
Hi, excuse me, have the request only now seen. I build these machines for lead bullets. If this information needs my mail address here. sandmann0512@gmail.com
hello email not work
Hi, my e-mail is working, I keep getting mail.
Please try this email address.
wehling05@gmail.com
Many greetings Stephan
I sent an email as well
the most bureaucratic company in the world how can is bussiness
Hallo, bin im Urlaub, melde mich am 02.10.23
Hi, here is my email address, if you would like more information, just write to the following email.
sandmann0512@gmail.com
Hi. Is this machine still for sale?
I sent you an email about this machine
Hi, so far I haven't received any mail from you.
Here is my email address:
sandmann0512@gmail.com
@@sandmann0512 I resent it
I sent you an email. I didn't get a response. (
Hello, have searched everything in the mailbox, have not found any mail from you.
Here is my email address, please try again, if it doesn't work, report back.
Mail address: sandmann0512@gmail.com
Greetings Stephan
@@sandmann0512 , I sent the email again yesterday. From two addresses.
Hello, no, nothing has arrived yet, that's very strange, you haven't received my mail.
I answered you right away yesterday.
Perhaps your email will still arrive today with a little delay.
I don't know why, I get emails from all over the world. there are no problems here.
Let's wait and see.
@@Terkinmsk Hi, you can also reach me on Whatsapp.
+49 176 50261924
Hello, no, nothing has arrived yet, that's very strange, you haven't received my mail.
I answered you right away yesterday.
Perhaps your email will still arrive today with a little delay.
I don't know why, I get emails from all over the world. there are no problems here.
Let's wait and see.
Sent you an email !
hello plese answer me i send email to you
What is your email
Hello, I apologize for just getting in touch.
My email adress:
sandmann0512@gmail.com