I am absolutely getting one of each of these new dual lok cans. The 556 and 30cal are very nice. I got hands on one at my local shop today and the new mount is really awesome. If it didn’t lock in rotating the lock collar one way it would lock in going the other way. Super cool reliable mount setup!
Love mine. Super light and the mounting system works well. The back pressure isn't bad at all. This is coming from a lefty who is used to gas in the face.
Just want to say I love this suppressor I just bought one and lucky my FFL goes to the same range and he brings it so I can use. On a Geissele 11.5 just a tiny amount of gas only notice after string of fire and on a 16 in criterion no blow back gas. Can’t wait to finish my 14.5 build with mk1 patrol upper to try it out; oh yeah btw I also have a recce 5 in jail at another ffl
Unfortunately no, the DUAL-LOK line is not user-serviceable. However, you shouldn't need to worry about maintenance since 5.56 cartridges are very clean and high pressure, so any build up of carbon or debris should burn out very easily. If you feel as that it needs cleaning around the mounting collar, you can take a 1" pipe brush and thoroughly rotate in and out until satisfied. Some users decide to drop the whole silencer into an ultrasonic cleaner, though be aware this can ruin the cerakote finishing
The Recce 5 is going to have the superior sound reduction between the 2 suppressors, but these do very well with sound also. The tone may be different between the 2 due to slightly different baffle designs as well as different flash hider end cap designs
Based on our own internal testing, we haven't found any additional or noticeable sound suppression from using those muzzle devices. You'll still be within hearing safe levels with either device!
Will it carbon lock and is there a way to add force to remove if the need were to arise? How is repeatability (accuracy) it put on a precision rifle? Can you also explain the differences between the standard dual lock and the HRT series?
If carbon lock is to occur, you can buy a Dual-Lok wrench from our website to help break it off the taper. You can find that here: www.griffinarmament.com/dual-lok-wrench/. We also make over-the-barrel Dual-Lok suppressors that are specifically designed for precision, long-range shooting (PSR series). You can find more information on those here: www.griffinarmament.com/silencers/rifle-silencers/dual-lok/ That being said, the whole Dual-Lok series has minimal POI shift and is great for repeatability due to the nature of the mounting system. The main difference between Dual-Lok 5 & 7 and HRT-5 & 7 is the tube construction. The Dual-Lok 5 & 7 are tubeless suppressors with vented, flash hiding end caps, which is great for gas reduction and flash suppression. The HRT series is a traditional tube design made for hard use and sound suppression, but has a little more blowback than the Dual-Lok 5 & 7. Both series have our Eco-Flow baffle technology and are hearing safe on their designated calibers. So, if you want a lightweight suppressor with better gas reduction, go with Dual-Lok. If you want a hard use suppressor with a great tone, go with HRT.
Great initial design only problem I'm having is with the splines being very close to the hand guard mine won't lock properly. The only fix I can see is getting the flash hider with a neck that will love the treads further away. Very sad about that.
Nope, taper mount devices will not work with the DUAL-LOK suppressors. The taper is located in a different spot on the DUAL-LOK muzzle devices. DUAL-LOK suppressors require the use of DUAL-LOK muzzle devices
In regards to the DL5, is there any gain in that extra .6 inches over the exclusive HRT can’s 5.9 inch OAL? Or is it just that civilian/commercial customers don’t get the ultra cool guy stuff.
The DL5 will fit a new muzzle device to be released while the HRT will not. The HRT was intended to be more compact for close corner shooting environments. The HRT is also going to be a little heavier because it's not tubeless.
Almost makes me wish I didn't have the M4SD muzzle device pinned... Will this type of light weight tube design be coming to the M4SD line? Awesome video very informative thank you! 👊🏼🔥🔥🔥
We just released 2 DUAL-LOK suppressors with the mounting system integrated into the suppressor itself. But the mounting system is available on our website as a 1.375x24 Hub mount to thread into applicable suppressors
You guys keep saying flash this and flash that so we cant use that in CA if it talks about it any ways I hear have a flash can that works with other brands like 2A 2A Armament T3 compensator is that true
Then lets have a conversation about it! Reach out to customer service at cs@griffinarmament.com we can get more info on your shooting schedule & goals & can recommend what we believe would be the best fit for you!
Nope, the Recce 5 is absolutely here to stay. We will be coming out with a DUAL-LOK model that's damn near a Recce 5 with this mounting system though. So stay tuned for that one
@@GriffinArmamentOfficial ok cool I justbought 4 of them so I would be a little sad if that was the case. I love your product. I'll pick up one of these when I get my others back. I'm waiting on 16 e forms right now.
@@GriffinArmamentOfficial it's going on 6 months now. I've had a couple kicked back for fingerprints not being submitted but silencershop was fast to fix it. Eforms hasn't really worked out for me so far. Everything is well over 90 days
Great overview. I'm going to link this video in the description section of my review on the DL 5&7 suppressors.
Adam you beat me to commenting about your upcoming event and I definitely want to try these out in November. Love my Griffin Armament suppressors
I am absolutely getting one of each of these new dual lok cans. The 556 and 30cal are very nice. I got hands on one at my local shop today and the new mount is really awesome. If it didn’t lock in rotating the lock collar one way it would lock in going the other way. Super cool reliable mount setup!
Love mine. Super light and the mounting system works well. The back pressure isn't bad at all. This is coming from a lefty who is used to gas in the face.
Nicely done. Love seeing a company video that actually explains how things work.
These are slick! It's just an extra benefit to the taper mount system. Best of both worlds
Just want to say I love this suppressor I just bought one and lucky my FFL goes to the same range and he brings it so I can use. On a Geissele 11.5 just a tiny amount of gas only notice after string of fire and on a 16 in criterion no blow back gas. Can’t wait to finish my 14.5 build with mk1 patrol upper to try it out; oh yeah btw I also have a recce 5 in jail at another ffl
Love it! Going to see the flow through endcap portion on the tradition taper offerings?
Likely not, that end cap design is specific to this line of suppressors.
There's no way to safely remove the baffles at home to clean out the inside of the suppressor? I ordered the HRT 5.56 and can't wait for it to arrive!
Unfortunately no, the DUAL-LOK line is not user-serviceable. However, you shouldn't need to worry about maintenance since 5.56 cartridges are very clean and high pressure, so any build up of carbon or debris should burn out very easily. If you feel as that it needs cleaning around the mounting collar, you can take a 1" pipe brush and thoroughly rotate in and out until satisfied. Some users decide to drop the whole silencer into an ultrasonic cleaner, though be aware this can ruin the cerakote finishing
I wonder about the exposed springs. Like if fort gets there it’s gonna lock something up, right?
Maybe I missed it in the video… can a 7.62 can mount to a 5.56 muzzle device? Like if I got 7.62 version to use on both calibers…
Yep, that'll work just fine!
Thanks for the reply!
Awesome. I really like my Recce 5 already. And I dig the weight.
How do these compare as far as sound with the Recce 5?
The Recce 5 is going to have the superior sound reduction between the 2 suppressors, but these do very well with sound also. The tone may be different between the 2 due to slightly different baffle designs as well as different flash hider end cap designs
Is using the dual port paladin brake vs the tactical compensator likely to cause a difference in sound when a suppressor is mounted?
Based on our own internal testing, we haven't found any additional or noticeable sound suppression from using those muzzle devices. You'll still be within hearing safe levels with either device!
So it’s a tubeless Recce 5 with a taper mount + a dual lok collar locking mechanism in addition to the taper mount?
Do y'all have plenty of the Dual Lok 7s being made or already made? Just asking because I placed a backorder with silencer shop lol..
Will it carbon lock and is there a way to add force to remove if the need were to arise? How is repeatability (accuracy) it put on a precision rifle? Can you also explain the differences between the standard dual lock and the HRT series?
If carbon lock is to occur, you can buy a Dual-Lok wrench from our website to help break it off the taper. You can find that here: www.griffinarmament.com/dual-lok-wrench/.
We also make over-the-barrel Dual-Lok suppressors that are specifically designed for precision, long-range shooting (PSR series). You can find more information on those here: www.griffinarmament.com/silencers/rifle-silencers/dual-lok/
That being said, the whole Dual-Lok series has minimal POI shift and is great for repeatability due to the nature of the mounting system. The main difference between Dual-Lok 5 & 7 and HRT-5 & 7 is the tube construction. The Dual-Lok 5 & 7 are tubeless suppressors with vented, flash hiding end caps, which is great for gas reduction and flash suppression. The HRT series is a traditional tube design made for hard use and sound suppression, but has a little more blowback than the Dual-Lok 5 & 7. Both series have our Eco-Flow baffle technology and are hearing safe on their designated calibers.
So, if you want a lightweight suppressor with better gas reduction, go with Dual-Lok. If you want a hard use suppressor with a great tone, go with HRT.
Cool design! Looks simple and effective. Nice work.
It's very secure! The main thing is making sure your muzzle device is torqued down appropriately!
Another awesome product from my favorite suppressor company. Can't wait to see all your new products @NFA Review Channel suppressed fest in November
Awwww hells yes! We will see you there!
Great initial design only problem I'm having is with the splines being very close to the hand guard mine won't lock properly. The only fix I can see is getting the flash hider with a neck that will love the treads further away. Very sad about that.
Hrt 556
Raidian mod 1 rifle
For reference
Hope to see a review on Sage Dynamics
So can you still use your old taper lock non dual lock mounts with this can? Since the taper will still lock up without need for the second lock.
Nope, taper mount devices will not work with the DUAL-LOK suppressors. The taper is located in a different spot on the DUAL-LOK muzzle devices. DUAL-LOK suppressors require the use of DUAL-LOK muzzle devices
In regards to the DL5, is there any gain in that extra .6 inches over the exclusive HRT can’s 5.9 inch OAL? Or is it just that civilian/commercial customers don’t get the ultra cool guy stuff.
The DL5 will fit a new muzzle device to be released while the HRT will not. The HRT was intended to be more compact for close corner shooting environments. The HRT is also going to be a little heavier because it's not tubeless.
What’s the new muzzle device?
Almost makes me wish I didn't have the M4SD muzzle device pinned...
Will this type of light weight tube design be coming to the M4SD line?
Awesome video very informative thank you! 👊🏼🔥🔥🔥
Actually... yes! The M4SD-L -> Keep an eye on social media and subscribe to our newsletter for all the latest happenings at Griffin!
I'm confused. Is this a new suppressor or just a new mount for existing suppressors? Like are you going to be able to buy this mount for an Optimus 9?
We just released 2 DUAL-LOK suppressors with the mounting system integrated into the suppressor itself. But the mounting system is available on our website as a 1.375x24 Hub mount to thread into applicable suppressors
any potential of a 5/8x24 sig tape flash hiders?
Negative, our taper mount muzzle devices only work with our taper mount suppressors
You guys keep saying flash this and flash that so we cant use that in CA if it talks about it any ways I hear have a flash can that works with other brands like 2A 2A Armament T3 compensator is that true
I am really not sure what to buy between this, a Recce 5 or the Explorr
Then lets have a conversation about it! Reach out to customer service at cs@griffinarmament.com we can get more info on your shooting schedule & goals & can recommend what we believe would be the best fit for you!
@@GriffinArmamentOfficial absolutely. I welcome the conversation.
Just like Deadair keymo nice I like it.
Looks similar but different
So Is the dual lok 5 replacing the recce 5?
Nope, the Recce 5 is absolutely here to stay. We will be coming out with a DUAL-LOK model that's damn near a Recce 5 with this mounting system though. So stay tuned for that one
@@GriffinArmamentOfficial ok cool I justbought 4 of them so I would be a little sad if that was the case. I love your product. I'll pick up one of these when I get my others back. I'm waiting on 16 e forms right now.
@@ryanwilder9792 Praying for speedy approvals for ya! Yes, we adore the Recce 5 so that model is absolutely staying in the line-up
@@GriffinArmamentOfficial it's going on 6 months now. I've had a couple kicked back for fingerprints not being submitted but silencershop was fast to fix it. Eforms hasn't really worked out for me so far. Everything is well over 90 days
The unanswered question: which components are constructed from inconel? 🤔
The spring in the mounting collar is constructed from inconel
My DL5 is in jail.
Still in jail?
Dude doesn’t miss a meal 😂. Nice silencers though