This happened to me and he helped me with the parts. It was quick, easy and everything he said was extremely accurate. I have used his emulator for thousands of starts without fail. I highly recommend him and his service/product.
Great video! Is the same for a MB2012 SLK 350? I have the same problem, won’t start- won’t crank - I do get the message - Take your key from ignition- (ESL emulator could resolve the problem )
Wow great respect..really nice bit of kit for programming. I've got Mercedes Benz w208 c200 kompressor 2002..key goes in turn and steering lock goes off..so can turn steering wheel left and right but will go to start . Do I need to buy your set up autel to solve my issues..I'm in the uk..Thank you in advance.
Thank you. Did you mean ; key fob turn to on, also unlocks the ESL to unlock (which steering wheel be able to move freely) but will it start the car or not ?
Currently having this issue. All of a sudden, car does nothing. And doesn't recognize any key in ignition. Not spare key either. Had it towed to my mechanic. He can't run a diagnostic with the car completely shut down. Tested battery. It's good and less than a year old. I have to get it towed now a 2nd time to a more advanced import shop. I'm guessing eis or esl. Also, The wheel is locked. I am hoping the import specialist will do as good of job as you did on this.
I have a 2003 c230 Coupe with original key set/fobs. 2 batteries inside. I had a Clifford alarm put in 4 years ago, Ive only had to replace one 3v battery in one key fob in 3 years. I do not unlock or lock with Benz fob only the Clifford alarm fobs. Sometimes I get a no start on one Benz key but not the other Benz key. I tried to jump the battery which is two years old from Mercedes but the car would not start. I was able to out it in neutral and roll the car into a parking spot as the wheel moved fine left/right. Tow truck took it home where I usually trouble shoot it. ESL emulator huh?
@@parallelpost first of all, you need to remove that Clifford aftermarket alarm first , then we can start diagnosing. That alarm could cause to no start , once everything is set back on OEM factory , then start diagnosing. Message me on Facebook “auto Purlieu” so I can further assist you
The car I’m working was fine as far as starting after disconnecting the power cables from the distribution box one by one it won’t start, I had the neg. Batt. Cable disconnected. I was looking for parasitic load. I heard a lot of clicking underneath the dash so I sought it could be the ESL but today I got the steering column almost completely out but to my surprise I don’t see an ESL. Tomorrow and going to removed the speedometer cluster and see if I can find an emulator. I’m getting in the dash two warning lights, the first one is power steering malfunction see operators Manuel, the second is service required do not shift gears visit dealer. Are this lights common when the ESL gos bad?
Great video bro. I have a 04 c230 kompressor. Put the key in and unlocks and turns key to on position but wont start car. EIS locks and unlocks fine but cant get it to start. Any advice would be appreciated.
@autopurlieu my car works after 2 or 3 tries. Always, lights on the dash turn on has been like that for 6 months. Do you think the emulator is what I need or could be something else, I'm like 3 hours away from your state
@@AndyCam-cw7kx car will start with the ESL emulator even the original ESL is under the column in locked position. However, you won’t be able to steer the steering wheel if your original ESL (in locked position )
@@AndyCam-cw7kx @ when it’s in lock position, you must remove the ESL under the steering wheel. Only when the ESL is unlocked position you can leave the ESL . You only have 1 connector to attach the ESL emulator
This happened to me and he helped me with the parts. It was quick, easy and everything he said was extremely accurate. I have used his emulator for thousands of starts without fail. I highly recommend him and his service/product.
Thanks brother 🙏
You did an excellent job of showing us every angle and every step! Thanks
Very detailed explanation. Thank you for sharing. Awesome video.
Wao excellent work congratulations for demonstration to us thanks for every video you posted
Much appreciated your support 🙏
Nice work sir ji
Thank you for your support 🙏
Thanks
🙏
I am new fllower bro...most coret infromation hard work bro
@@arshiyemanarham1134 thank you for your support brother 🙏
Thanks for such an informative video
@@mbusimvuyana9550 thank you for your support 🙏
Awesome video my dude. Thanks
Much appreciated brother 🙏.
I’m not good at making videos and editing 😂
I do my best
@@autopurlieu it’s perfect great educational video.
@@skinner4531 thank you for your support
Great video!
Is the same for a MB2012 SLK 350?
I have the same problem, won’t start- won’t crank - I do get the message - Take your key from ignition- (ESL emulator could resolve the problem )
@@AlbertoSanchez-bp4wo message me on Facebook “Auto Purlieu “ so I can further assist you
That was a good video
I appreciate that brother 🙏
Wow great respect..really nice bit of kit for programming. I've got Mercedes Benz w208 c200 kompressor 2002..key goes in turn and steering lock goes off..so can turn steering wheel left and right but will go to start . Do I need to buy your set up autel to solve my issues..I'm in the uk..Thank you in advance.
Thank you.
Did you mean ; key fob turn to on, also unlocks the ESL to unlock (which steering wheel be able to move freely) but will it start the car or not ?
@@autopurlieu Thank you for quick reply..yes steering wheel unlocks but key will not move to starting position.
@@autopurlieu your advice would be helpful thanks.
@@blackdogchris common problem to kompressor, it could be EIS (ignition switch) problem. But will need more testing to pinpoint it
@@autopurlieu So autel is needed for me to find the problem..
Currently having this issue. All of a sudden, car does nothing. And doesn't recognize any key in ignition. Not spare key either. Had it towed to my mechanic. He can't run a diagnostic with the car completely shut down. Tested battery. It's good and less than a year old. I have to get it towed now a 2nd time to a more advanced import shop. I'm guessing eis or esl. Also, The wheel is locked. I am hoping the import specialist will do as good of job as you did on this.
@@Creativeisme8 you can message me on Facebook “Auto Purlieu “ so I can further assist you .
did they figure out the problem?
I have a 2003 c230 Coupe with original key set/fobs. 2 batteries inside. I had a Clifford alarm put in 4 years ago, Ive only had to replace one 3v battery in one key fob in 3 years. I do not unlock or lock with Benz fob only the Clifford alarm fobs.
Sometimes I get a no start on one Benz key but not the other Benz key.
I tried to jump the battery which is two years old from Mercedes but the car would not start. I was able to out it in neutral and roll the car into a parking spot as the wheel moved fine left/right. Tow truck took it home where I usually trouble shoot it.
ESL emulator huh?
@@parallelpost first of all, you need to remove that Clifford aftermarket alarm first , then we can start diagnosing.
That alarm could cause to no start , once everything is set back on OEM factory , then start diagnosing.
Message me on Facebook “auto Purlieu” so I can further assist you
The car I’m working was fine as far as starting after disconnecting the power cables from the distribution box one by one it won’t start, I had the neg. Batt. Cable disconnected. I was looking for parasitic load. I heard a lot of clicking underneath the dash so I sought it could be the ESL but today I got the steering column almost completely out but to my surprise I don’t see an ESL. Tomorrow and going to removed the speedometer cluster and see if I can find an emulator. I’m getting in the dash two warning lights, the first one is power steering malfunction see operators Manuel, the second is service required do not shift gears visit dealer. Are this lights common when the ESL gos bad?
@@sauls8250 first thing, what car year and model are you working on ?
Great video bro. I have a 04 c230 kompressor. Put the key in and unlocks and turns key to on position but wont start car. EIS locks and unlocks fine but cant get it to start. Any advice would be appreciated.
Does the steering lock goes locks and unlocks ?
I have same issue on a w164 ML ignition comes on esl is unlocked
Nice sir .i have a 2004 C240 key doesn't turn no sound when u put the key in , what can i do
@@MrRohanstar message me on Facebook “Auto Purlieu” so I can further assist you
Sprinter 906 im getting circuit 50 on but no 50 on can bus.no fault codes on Das.im testing on bench
What state are you in?
@@jacobgomez2682 NC
Where is your shop Purlieu in Canada or in State?
@@senken2111 US
@autopurlieu where you located in the us
@@elviejon84ful NC
@autopurlieu my car works after 2 or 3 tries. Always, lights on the dash turn on has been like that for 6 months. Do you think the emulator is what I need or could be something else, I'm like 3 hours away from your state
@@elviejon84ful message me on Facebook “auto Purlieu” so I can further assist you
Merci boss
🙏
Does it emulator still work if the els still attached?
@@AndyCam-cw7kx you can only connect either the ESL or the ESL emulator. You can’t have both
Are you saying even thou the els in locked position, the els emulator will work normally?
@@AndyCam-cw7kx car will start with the ESL emulator even the original ESL is under the column in locked position. However, you won’t be able to steer the steering wheel if your original ESL (in locked position )
@@AndyCam-cw7kx @ when it’s in lock position, you must remove the ESL under the steering wheel.
Only when the ESL is unlocked position you can leave the ESL .
You only have 1 connector to attach the ESL emulator
Thank you. How much would you charge to program the els emulator?
Thanks for the video, but it’s a pity that there are no Russian subtitles.
I’m sorry to hear that. But I hope you would follow step by step
i am having the same issue right now, but my car is parked on my driveway
@@amadubah7847 let me know if you want me to program you an ESL emulator
Are you a mobile mechanic or a locksmith?