How to paint your spoiler / wing
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- This video shows you the steps I use to paint your wing or bumper car parts Dodge Charger hellcat spoiler wing new paint job DIY White PAINT how to paint car parts , hope this video how to or gives you an idea what you have to do to paint your car parts if you have any questions leave a comment below thanks for watching you see you in the next video
![[UNCUT] The Loyal Pin ปิ่นภักดิ์ EP.4 (4/4)](http://i.ytimg.com/vi/d3l5rxl5CVo/mqdefault.jpg)
I just ordered a spoiler for my car and I just wanted to see the process because I would never attempt this! You do great work. Thanks for this video.
Thanks man 🙌🏽
Great video very helpful trying to paint my spoiler black on 2004 grand am silver car
Thanks, and thanks for checking out the video 🙌
Looks great man and thanks for the tutorial.
Thanks man, no problem
Bro gettin sprayed while holding was takin one for the team😂
I just bought an unpainted spoiler
Do I need to sand it or degrease it?
Would it just be fine with cleaning it with alcohol and then just the prime, paint, clear coat. Thank you for your videos.
Yeah that will be fine to 👍🏾
hey! im getting my unpainted spoiler soon, how did the process go? any tips
Same any updates?
Lmao! When your son was “helping” thanks for making the video man...just that extra bit of confidence I needed to tackle my next project
Lol , cool man , just try not to over think it even tho I always still do 😆 , good luck ,and thanks for check out the video 🙌
I need mine painted I ordered a unpainted hellcat spoiler online just sitting in my living room
Are you in Phoenix AZ
Is this a rubber spoiler?
No it was like a hard plastic
I head it was wrong to cut and polish right after a paint job, or is this just frowned upon?? I have a gun and Ive shot some trim and what not and waited months before the first cut and polish. not bashing at all, just curious. Looks great btw!!!!
You can cut and polish it the next day as long as it's dry but sometimes it can dye back and look not so shiny but you can let it sit and dry a couple more days if you have the time , some places might wait a while Till they cut and polish, but what ever works and the job is clean at the end 👍 , thanks for checking out the video
K1 or K2 clear is good
Hey mate just wandering what the grit of that scuff pad would roughly be? I’ve recently gotten a lip spoiler for my car in Australia and I need to colour match it or make it black and will follow your tutorial minus the paint gun
It was 800 Grit , but u can use water sandpaper 600 Grit is good to use to
@@josha7548 awesome absolute legend! I couldn’t get any 600 grit from the local auto parts store so I just got 800 wet/dry grit and I guess I’ll just work a bit harder. 1 more question regarding a crack, I’m going to drill the end of it to prevent further cracking but what would I use to fix the crack? There’s also a gouge/ chunk which snapped out of it so I’m going to build it back up with Fibreglass body filler, would this be the correct method of doing it? Thanks in advance I really appreciate it
@@flash52958 yeah fiberglass and body filler will be good, if you have a crack you want to sand or grind out the crack and then use fiberglass and body filler to fill it in
I’m in Arizona and looking to get a spoiler painted gloss black.
YeahLook us up apexwetwerk down town Phoenix
I got quoted 200 from a repaint shop
@@allmin6779 that's good price 👍
get some Spraymax2k Gloss Clear coat
I'll check it out
if you just add 2 more strings to your wires to anchor to the ceiling it wont swing around.
True, thanks 👍🏽
Do i need to do the waxxing at the end? can i just sand down, primer + basecoat + basecoat + clearcoat.\?
Waxxing do u mean.cut and polish?
Great video. Question. What size spray tips are you using for primer, base, n clear. And what brand spray guns for base nclear. Thanks.
1.4 tip , and was a cheap gun I got from Amazon $150
Looks great man good shit. Just curious if you degrease it then touch it with your bare hands doesn't that defeat the purpose?
Thanks man, Yeah I do greased it , I had to degrease it again because I had to move it around I try not to touch it after I do grease it
Did you use a 1K clear or 2K clear? Would it really matter which one to use? Thanks
I heard 2k clear gives a much better shine
Pro!
What is the dewalt that you used
DeWalt buffer polisher dwp849x , I ordered it from Amazon
Nice professional job this dude got!
Thanks man ,I appreciate that , thanks for checking out the video
Where can I find the adhesive promoter?
At a local auto paint supply store or you can find it on Amazon
@@josha7548 something like autozone, o’rielly?
@@review_u1587 no , go on Google maps and type in auto paint and supply,
What compressor do you use? Thanks
Ingersoll 60 gallon 5 horsepower
Do you think this would work with a stock chin spoiler on a mustang . My spoiler looks like a different material . Like hard plastic
Yeah if there is no paint or primer on it is best to use the inhesion promoter but you do want to send it before the applying adhesion promoter with at least 600 - 800 Grit sand paper
@@josha7548 thank you !!!!!
@@l2eggyheavy488 no problem
Honey, I clearcoated our son!
😅 me to
Looks great bro! U dont use step 3 on the 3m?
Thanks bro , No just step 1 and 2 , it looks good with one and two maybe a show car you can do step 3 , thanks for checking out the video
how much do you charge for a 5th gen zl1 spoiler
Right now to paint we are charging 250
-350 depends on color
@@josha7548 its a summit white. lmk donovanaldair02@icloud.com
What do you charge for a job like that?
We have a shop now ,for a spoiler 250 -350 depending on color
@@josha7548 . It is lots of work. Thanks.
@@Indzeosko yeah the prep work is always the most time consuming, , and then material ain't getting cheaper
Speedokote clear
Amco finish 1