I still come back to your videos' for 'reference'! I always' learn something new!I want to get get more (2500 modules')!The price has dropped 'amazingly'!
Great overview. I bought the FultAmp a while back because it was cheap 😀 Interested in the 2500 so great to see your series. It's a shame Behringer don't spend a few more pennies and screw the sockets to the faceplate. The joints will give sooner or later. But full marks for producing affordable modules in a field where "modular" and "cheap" never appear in the same sentence 😀
I only have 2 of these modules and 2 on pre order. Thank you for your videos. You especially helped me with the CVA and CVB on the 1005 module. Much appreciated.
great review. they sound amazing. I have not gotten independent modules yet, but have a few synths with lots of cv such as the Behringer 2600, the soma pulsar 23 and the matrixbrute and Dave smith pro 2 have cv in and outs as well, and I have been patching them all together, but want to get into a real modular set up. you review has helped a lot in considering it all. thanks.
After listening to Radique’s Trilogie I impulsively bought two 1004’s. The FiltAmp seems like the right connection point for the two, plus adding 2 envelope generators, but I really think I want to go with the 1047 filter. The 1005 works with two OSCs, but not really a mixer. But could I just connect the envelopes to the 1047 and 1005? Is there a more logical route through a 100 piece? Thx.
The 1047 has only one audio input, the FiltAmp has two with attenuators, so it's also an audio mixer. The 1005 can't mix without the ring modulation going on, so very different to a "normal" mixer. For an audio mixer you could go big and use the 1050, or the smaller 297 from the 100 series. Also, if not fixed to Behringer, have a look at the Doepfer mixers.
@@synthesizer83 Thanks. I’m limiting myself to 5 modules (or whatever fits on the Behringer 19” rack) to get that “2500” sound. (Attached to a Moog Matriarch.)
I wouldn't try to compare them, the concepts are just too different. I played the 2600 only once, some time ago, so I can't really judge about it. The Odyssey (I have the Korg one) seems to be a bit more "balanced". The 2500 feels more experimental, with lots of "happy glitches".
Sure, when you're into soldering SMD and really want it. Otherwise, considered the price, I would not touch it. The jacks have no thread by the way, so no chance of mounting them to the frontplate in some way.
"Perhaps it's not the perfect series to start with modular" Oops... LOL I've been expanding my 2500 collection with DIY kits that I've been building here and there. Planning on getting a Maths once more ship to distributors. Still waiting on the 2500 sequencer as well as the mixer, which will complete the set for me :)
I guess if you're doing DIY, you have some sort of understanding what goes on in a modular setup, and then the Arp modules are a great source of inspiration... These sequencers are really interresting, will definetely try to get them (well, 2023 or so, with these insane backorders...)
@@synthesizer83 When you mentioned Tim having acquired a sequencer already, were you referring to the prototype unit he has in the video you linked? Or did he get his hands on a first batch of shipped units? If it's the latter I'm going to heckle him about posting a video review on the sequencer asap haha.
did you make the magnifier for the module on the right your self ,, my hermod needs a bigger screen , this is an idea I had .. just hadn't sourced the lens. yet ..
Iam enjoying ur videos. Kindly can u make video on from scratch for a newbie like what rack has to be taken for what module and how to connect power supply to them n internal connections. Thanks in advance. All the best.
Thanks! Yeah I was thinking about this for quite some time now, but always had something different on my agenda to come first. But this "introduction to Eurorack modular" will certainly follow as one of my next projects!
Thanks' for posting.Your videos' are very informative.The '2500' series' are a bit hard to get,here in the states'!I have been able to get 5-modules',so far.I would like more,but...........! I am using the 'Behringer,dual #112- oscillators' with these modules'! I will get the '2500'-oscillator,if they ever get here? : )
![F.HERO Ft. JSPKK x ลำไย ไหทองคำ x M-PEE - ไม่สนิทบิดหมด (Thai Riders Anthem) [Official MV]](http://i.ytimg.com/vi/kPJZ0UihBfk/mqdefault.jpg)
I still come back to your videos' for 'reference'! I always' learn something new!I want to get get more (2500 modules')!The price has dropped 'amazingly'!
You have the best review/description of these Behringer Eurorack modules on the TH-cams.
Thanks for making and sharing.
Bought the lot and 3 of the VCOs. Very powerful and expressive synth, super filter modules
Tim also has a couple of great videos on the System 100 modules
Great overview. I bought the FultAmp a while back because it was cheap 😀 Interested in the 2500 so great to see your series. It's a shame Behringer don't spend a few more pennies and screw the sockets to the faceplate. The joints will give sooner or later. But full marks for producing affordable modules in a field where "modular" and "cheap" never appear in the same sentence 😀
I only have 2 of these modules and 2 on pre order. Thank you for your videos. You especially helped me with the CVA and CVB on the 1005 module. Much appreciated.
Although I’m slowly building a (TT) Buchla, I’m looking at that MMFilter like this..😍
sounds incredible !
I have the enrtire 100 series, I’m going to do the 2500 just because it’s so inexpensive compared to all those modules! It sounds great!
its such a great machine that somehow became overlooked and overshadowed by the much inferiour 2600. behringer did a good job on this.
I mean, the 2600 was made to be portable, affordable and used on stage, some sacrifices had to be made over full modular system.
great review. they sound amazing. I have not gotten independent modules yet, but have a few synths with lots of cv such as the Behringer 2600, the soma pulsar 23 and the matrixbrute and Dave smith pro 2 have cv in and outs as well, and I have been patching them all together, but want to get into a real modular set up. you review has helped a lot in considering it all. thanks.
After listening to Radique’s Trilogie I impulsively bought two 1004’s. The FiltAmp seems like the right connection point for the two, plus adding 2 envelope generators, but I really think I want to go with the 1047 filter. The 1005 works with two OSCs, but not really a mixer. But could I just connect the envelopes to the 1047 and 1005? Is there a more logical route through a 100 piece? Thx.
The 1047 has only one audio input, the FiltAmp has two with attenuators, so it's also an audio mixer. The 1005 can't mix without the ring modulation going on, so very different to a "normal" mixer. For an audio mixer you could go big and use the 1050, or the smaller 297 from the 100 series. Also, if not fixed to Behringer, have a look at the Doepfer mixers.
@@synthesizer83 Thanks. I’m limiting myself to 5 modules (or whatever fits on the Behringer 19” rack) to get that “2500” sound. (Attached to a Moog Matriarch.)
How would you compare the sound of the 2500 vs 2600/odyssey?
I wouldn't try to compare them, the concepts are just too different. I played the 2600 only once, some time ago, so I can't really judge about it. The Odyssey (I have the Korg one) seems to be a bit more "balanced". The 2500 feels more experimental, with lots of "happy glitches".
@@synthesizer83 I think I prefer the arguably more ‘raw’, ‘wilder’ sound of the 2500 modules … 🤔
love the content, keep it up
Would it be possibly to modify the jacks to not apply as much pressure to the internals?
Sure, when you're into soldering SMD and really want it. Otherwise, considered the price, I would not touch it. The jacks have no thread by the way, so no chance of mounting them to the frontplate in some way.
"Perhaps it's not the perfect series to start with modular"
Oops... LOL
I've been expanding my 2500 collection with DIY kits that I've been building here and there. Planning on getting a Maths once more ship to distributors. Still waiting on the 2500 sequencer as well as the mixer, which will complete the set for me :)
I guess if you're doing DIY, you have some sort of understanding what goes on in a modular setup, and then the Arp modules are a great source of inspiration... These sequencers are really interresting, will definetely try to get them (well, 2023 or so, with these insane backorders...)
@@synthesizer83 When you mentioned Tim having acquired a sequencer already, were you referring to the prototype unit he has in the video you linked? Or did he get his hands on a first batch of shipped units? If it's the latter I'm going to heckle him about posting a video review on the sequencer asap haha.
@@seansnyder7744 Hi, it was a pre release prototype unit in his video.
Thank you.
💙
did you make the magnifier for the module on the right your self ,, my hermod needs a bigger screen , this is an idea I had .. just hadn't sourced the lens. yet ..
No, it's part of the VPME oscilloscope, and actually not a magnifying glass, just a simple cover for the display...
Any plans to get the sequencer module(s) as well?
Will be inevitable, especially since I love sequencers... However right now their ETA in stores is April 2022...
Iam enjoying ur videos. Kindly can u make video on from scratch for a newbie like what rack has to be taken for what module and how to connect power supply to them n internal connections. Thanks in advance. All the best.
Thanks! Yeah I was thinking about this for quite some time now, but always had something different on my agenda to come first. But this "introduction to Eurorack modular" will certainly follow as one of my next projects!
Thanks' for posting.Your videos' are very informative.The '2500' series' are a bit hard to get,here in the states'!I have been able to get 5-modules',so far.I would like more,but...........! I am using the 'Behringer,dual #112- oscillators' with these modules'! I will get the '2500'-oscillator,if they ever get here? : )
The 112 are also great! Use the sync output as additional square wave to create more complex waves!
lucky you got five....two only :/
The intro sounds like TOOL. :)
laber rabarber