Stock they event seems sluggish. I would put a 390 intake and carb on it. 372 are okish saws from stock and will always need some sorta tweaks to run right. A big bore bore helps alot but a unlimited coil is a major improvement.
@@majorpixchannel7146 what coil did you buy? I've put different coils 9n mine from like the rancher with a blue coil and whatnot idk how many different carburetor s tanks tank vents, plugs ,oil mixture, and the list goes on and on.. I've built a few kit saws, couple 660s a sweet ripper of a 460, and none of them have been nearly as problematic as this 372. I have a zama carb on it helped a bit but still just a slow running saw. I've just torn it back apart thinking ill clean that skirt off the cylinder and delete the base gasket and get the squish back down closer to 20 thousandths instead of like 60 where it was stock on mine with a gasket. Awesome content I just found ya and am subbed up
So, it came down to the coil it was not laying flush with the flywheel! Check to see if the coil is rocking on the flywheel! If it is ...the timing isn't correct! Even if you equal it out! I carved away at where the coil was rocking on the flywheel. It woke straight up! Hope this helps! 🙏
![เหนื่อยหน่อยนะ (SOMEONE LIKE ME) - GEMINI Prod. by URBOYTJ [ OFFICIAL MV ]](http://i.ytimg.com/vi/M55XjfhbrNw/mqdefault.jpg)
hey buddy great video. if you want a great tip to apply silicone use a small paint brush works great.
Thanks 😊 brother... and thats 💯 awesome tip
This cold front was crazy, I sold so much firewood last weekend was constant back to back deliveries.
Brrr kinda cold 🥶... then 60s this weekend lol
@@majorpixchannel7146 the cold sells firewood 🔥🪵 FAST!! Was crazy
@zeromark202 yes sir it does.... stay warm and safe out there, brother 🙏
Stock they event seems sluggish. I would put a 390 intake and carb on it. 372 are okish saws from stock and will always need some sorta tweaks to run right. A big bore bore helps alot but a unlimited coil is a major improvement.
Major improvement is what I'm hoping for! The coil I installed is unlimited and should wake this saw up! Really wanting this saw to be my 372 miller
The new coil woke it right up!!! It's back together now! And a beast!
@@majorpixchannel7146 Gret news.
@@majorpixchannel7146 what coil did you buy? I've put different coils 9n mine from like the rancher with a blue coil and whatnot idk how many different carburetor s tanks tank vents, plugs ,oil mixture, and the list goes on and on.. I've built a few kit saws, couple 660s a sweet ripper of a 460, and none of them have been nearly as problematic as this 372. I have a zama carb on it helped a bit but still just a slow running saw. I've just torn it back apart thinking ill clean that skirt off the cylinder and delete the base gasket and get the squish back down closer to 20 thousandths instead of like 60 where it was stock on mine with a gasket. Awesome content I just found ya and am subbed up
So, it came down to the coil it was not laying flush with the flywheel! Check to see if the coil is rocking on the flywheel! If it is ...the timing isn't correct! Even if you equal it out! I carved away at where the coil was rocking on the flywheel. It woke straight up!
Hope this helps! 🙏