Hello David, I have a 30 KVA generator which has no CAD, it uses ignition key for the purpose of cranking it, how can I automate this? Putting into consideration that there is no signal cable for the purpose of autostarting,, kindly waiting for your feedback
Hi, I'm a great fan of urs, I always watch your videos. However, can u please make a video in details, steps by steps on how to wire a 3-phase change over with phase monitoring, timers, relays, and explain in more details how the electrical interlock is made. Can u also please make the wiring diagram. Will be of great help to me. Thanks. Cheers.
170 kw (load demand) lets consider Power factor of 0.80. (note most alternator manufacture consider PF of 0.80). 170/0.80= 212.5KVA, its difficult to get a gen set of that rating. These are generator sizes mentioning but few 100,150,165,200,250,300,350,350KVA 250KVA is ok but if there is possibility 300KVA is fine.
A contactor can only be WARM under normal operation but HOT under abnormal conditions like under or high voltage, contact failing to open or close when it's engaged, dust and carbon between contacts.......etc.
heloo sir am so grateful for every single minute u spend to let us learn more from you , may the lord reward you.
So nice of you
Thanks so much continue to teach us
My pleasure, and Thanks for watching
Hy! Am really like your channel cs you explain from A to Z! keep going .
Thank you for watching.
nice video.I like it.can you do another video explaining how you connect/wire the mechanical interlock on the contactor.thanks
No problem Expect it
@@electreca1 I also will like to see how the wiring are done, thanks
thanks alot
exactactly what i needed
Thanks for watching.
Thankyou about automatic change over swich expertion but the time of sharing is short can you send step by step wiring diagram
I'll post it here electrecasolutions.com/
Hello David, I have a 30 KVA generator which has no CAD, it uses ignition key for the purpose of cranking it, how can I automate this? Putting into consideration that there is no signal cable for the purpose of autostarting,, kindly waiting for your feedback
This is actually achievable and quite simple, but I cant explain it in the comment I will do white board video for it From this week.
Thenks alot for the feedback,, am eagerly waiting
Hello David thanks for ATS videos. Where signal
cables be connected to the generator .
Hi, I'm a great fan of urs, I always watch your videos. However, can u please make a video in details, steps by steps on how to wire a 3-phase change over with phase monitoring, timers, relays, and explain in more details how the electrical interlock is made. Can u also please make the wiring diagram. Will be of great help to me. Thanks.
Cheers.
Am dropping that *VIDEO* soon..................thank you for watching
@@electreca1 is this video droped? For sure it might be helpful to me too. Am ur big Fan always watching to ur videos . Much love from Rwanda🇷🇼
A light company with appliances totalling to 170 Kw, what size of generator does it need interms of KVA
170 kw (load demand) lets consider Power factor of 0.80. (note most alternator manufacture consider PF of 0.80).
170/0.80= 212.5KVA, its difficult to get a gen set of that rating.
These are generator sizes mentioning but few 100,150,165,200,250,300,350,350KVA
250KVA is ok but if there is possibility 300KVA is fine.
@@electreca1 thenks alot for the feedback
Super
Thxu, engineer I see some control cables connected on the mechanical interlock, I need more explanation on them
Hi bro
Ur video is vry interesting good explanation...can u send me the wiring diagram of control & load pls.....thks in advanced...
Hey, thanks for the great videos, how can i get in contact with you?
You can contact me here electreca.workshop@gmail.com
Thanks for everything, is there a circuit diagram?
I will arrange one, Thanks for watching.
@@electreca1 did you arrange one?
Do u give physical training?
Not yet
Is possible to use one relay in automatic change over switch
Are you from Nigeria?
No
Thank you, good work, please can you give me the connection diagram and the schematic diagram thank you
Good experiences
Is there a way of getting in touch with you sir
can you tell us how to size and select the suitable automatic transfer switch
Hello.. How do you connect the generator to start and stop
hello mr electreca , my contuctors produces a very loud humming when generator picks load during blackout, what could be the problem ?
Most likely your contactor coil is dirty,
You can open it and clean the armature and iron core, the noise ll reduce signficantly.
Hi would you mind to send the circuit diagram
th-cam.com/video/9rIbCNmuwXw/w-d-xo.html at the end of that video there is a circuit........... let know if you understand it.
@@electreca1 Ok i have seen it altho' i wanted to see the schematic diagram of this video especially the relay.
@@SolomonKinyanjui_sk ok ill find some time and draw it for you.......drop your email here
@@electreca1 Thank you. solokinyanjui@gmail.com
@@SolomonKinyanjui_sk you can check your email
i need control panel classes , how much does it cost
Beside the generator contactor, I can see another terminal block with several wires,, what should be wired there? It has approximately four wires
Is it normal for contactor to become hot
A contactor can only be WARM under normal operation but HOT under abnormal conditions like under or high voltage, contact failing to open or close when it's engaged, dust and carbon between contacts.......etc.
Kindly show how to do the wiring
Philip thanx for watching, I'll make it available soon.
@@electreca1 sir that generator project work is very excellent but i need step by step explain about the components
What's the name of boxs
Wht do you mean by NAME OF BOXS?
Sir Please do us.
Could I get a drawing diagram
Ill get it for you soon
@@electreca1 thank you