Title: "A lathe with copy attachment for making identical floats in Rohacell plastic" (Dutch) Making quill floats on a mini-lathe in a range of .10 grams up to 6 grams in weight. Clever tooling made to repeat the process accurately. Nice! Thanks for putting up on TH-cam
Leuke setup, ik wil voor mezelf ook dobbertjes en klein kunstaasjes van balsa gaan maken. Binnenkort ga ik het spul opbouwen want het materiaal heb ik eigenlijk allemaal al in huis, op 1 best belangrijk dingetje na want ik kan het nergens vinden....Kan je me vertellen waar je zo'n centraal asje met die 2 meenemertjes kan kopen (liefst met een link) ? Dat ding wat bij de minidraaibankje zat vind ik niks, deze die jij gebruikt lijkt me een stuk handiger. Alvast bedankt voor de moeite van het lezen. (en een ieder ander die het weet mag ook antwoorden uiteraard haha)
Hoi, Zo'n centraal asje maak je eenvoudig zelf als je al een metaaldraaibankje hebt. Een stukje messing staf van 10 of 12 mm in je klauwplaatje of spantang. Dit messing inboren met een fijn boortje dat je in het tegencenter klemt. Dit boortje staat dus stil, terwijl de messing draait . Zodoende krijg je een centraal gaatje waar je asje later in wordt verlijmd. De meenemertjes zijn ook stukjes staaldraad die je in gaatjes moet verlijmen. Die gaatjes kun je met hetzelfde boortje maken maar dan actief boren in de messing, naast het centrale gaatje.
@@ronaldhammers4232 Thanks! Had you ever turned balsa floats with the same tool? I would like to build a CNC mill with to linear and one rotary axis to cut fishing balsa lures. Am I dreaming awake?
@@gabrielfusaru1211 Yes it is possible to use the diamond disc for Balsa also. Be aware this disc can get hot while in process, so the spinning of the tool must be reduced.
@@ronaldhammers4232 Thanks!!! I did order disks similar to ones you use and I'll maybe order some diamond (?) cylindrical deburr Dremel tools from China just to experiment .
Hello Ronald, i'm making floats too (for my own using) with "Dremmel" and mini-lathe (as you) but, i have problems with the speed needed for both (dremmel and lathe) when using rohacell. So, my float "surface" is not as good as your. Have you any advice for me ? Thanks a lot.
Hello, The speed of the spindle (Lathe) is about 1500 RPM and the diamond grinding disc does 20.000 RPM. However you have to consider going twice over the body, because the first time the disc is bet a little while removing the rohacell. The second time this is not an issue.
Hello Ronald Can you say where I can buy a fishing template or how I can make fishing template.Lately i read your fishing float blog and I knew your friend make template on 3d printer .Can you make for me a fishing template or sell some Thank you so much
Try "Timmyfish". (Google the name and you can buy square lengths there. www.timmyfish.com/PMI-Foam-Square-Rods-Made-in-China-110kg-m3-Rohacell-p323620.html
Title: "A lathe with copy attachment for making identical floats in Rohacell plastic" (Dutch)
Making quill floats on a mini-lathe in a range of .10 grams up to 6 grams in weight. Clever tooling made to repeat the process accurately. Nice! Thanks for putting up on TH-cam
Super Arbeit. Goed gedaan.
Xin chào bạn mình ở Việt Nam mình muốn mua máy này thì phải làm thế nào mới có thể mua được bạn
Sorry, Can't read this. Please in English
brilliant well thought out thanks for sharing
Like 341, show full 👏👏👏
Is it possible to show the lathe in all its details. specifically the top sled??? that would be awesome
Leuke setup, ik wil voor mezelf ook dobbertjes en klein kunstaasjes van balsa gaan maken. Binnenkort ga ik het spul opbouwen want het materiaal heb ik eigenlijk allemaal al in huis, op 1 best belangrijk dingetje na want ik kan het nergens vinden....Kan je me vertellen waar je zo'n centraal asje met die 2 meenemertjes kan kopen (liefst met een link) ? Dat ding wat bij de minidraaibankje zat vind ik niks, deze die jij gebruikt lijkt me een stuk handiger. Alvast bedankt voor de moeite van het lezen. (en een ieder ander die het weet mag ook antwoorden uiteraard haha)
Hoi, Zo'n centraal asje maak je eenvoudig zelf als je al een metaaldraaibankje hebt. Een stukje messing staf van 10 of 12 mm in je klauwplaatje of spantang. Dit messing inboren met een fijn boortje dat je in het tegencenter klemt. Dit boortje staat dus stil, terwijl de messing draait . Zodoende krijg je een centraal gaatje waar je asje later in wordt verlijmd. De meenemertjes zijn ook stukjes staaldraad die je in gaatjes moet verlijmen. Die gaatjes kun je met hetzelfde boortje maken maar dan actief boren in de messing, naast het centrale gaatje.
Hi Ronald! Could you tell me what's the cutting tool made of? Some commercial names would help me too. Thanks in advance!
It's a diamond cutting disc in 20 mm. If you google this, there will be found some suppliers
@@ronaldhammers4232 Thanks! Had you ever turned balsa floats with the same tool? I would like to build a CNC mill with to linear and one rotary axis to cut fishing balsa lures. Am I dreaming awake?
@@gabrielfusaru1211 Yes it is possible to use the diamond disc for Balsa also. Be aware this disc can get hot while in process, so the spinning of the tool must be reduced.
@@ronaldhammers4232 Thanks!!! I did order disks similar to ones you use and I'll maybe order some diamond (?) cylindrical deburr Dremel tools from China just to experiment .
Hello Ronald, i'm making floats too (for my own using) with "Dremmel" and mini-lathe (as you) but, i have problems with the speed needed for both (dremmel and lathe) when using rohacell. So, my float "surface" is not as good as your. Have you any advice for me ? Thanks a lot.
Hello, The speed of the spindle (Lathe) is about 1500 RPM and the diamond grinding disc does 20.000 RPM. However you have to consider going twice over the body, because the first time the disc is bet a little while removing the rohacell. The second time this is not an issue.
@@ronaldhammers4232 Thanks a lot Ronald. It really helps me. Regards.
Hello Ronald world class your poses where can I get this pose template please thank you
Quisiera saber que origen es el torno y que marca es, gracias
Unimat 3 austríaco
Hello Ronald
Can you say where I can buy a fishing template or how I can make fishing template.Lately i read your fishing float blog and I knew your friend make template on 3d printer .Can you make for me a fishing template or sell some
Thank you so much
Hello Kacper,
I do not make the templates myself. You have to contact Pennenrosseel. (Google the name ande you can contact Ludo by his website)
@@ronaldhammers4232 how much is the templates maybe cost
@@kacperwojewoda4134 You shoud ask Ludo for prices. I exchange for float materials so I do not know how much templates cost
Interesting ideea with that tube for centering .
where could I get someone to build me the same set up does anyone know?
Hoi Ronald hammers.
Hoe en waar kan je beste de mallen laten maken?
En hoe weet je wel gewicht de dobber dat je maakt dan heeft? Groetjes
Hi Ronald where I can buy Rohacell ??
Try "Timmyfish". (Google the name and you can buy square lengths there.
www.timmyfish.com/PMI-Foam-Square-Rods-Made-in-China-110kg-m3-Rohacell-p323620.html
where i can get a yours machine like ?
I'm sorry. The Emco Unimat 3 is not in production anymore. Maybe if ypu google the name, you can find second hand lathes like this one
Music is from the Pinnacle video editor programm.
Background music?
What is the white block material
This is Rohacell foam. (please google "Rohacell" for more information)
BEST !
nice little machine .. but not cost effective unfortunatly
It's a hobby! Not commercial.
prachtig, alleen je moet stoppen met nagelbijten.
Klopt. Een nare gewoonte.