Just bought one of these, arm not shown on any of the instructions. TS5204BBCDA - TO BE CLEAR ARM NOT SHOWN ON INSTRUCTIONS FOR HANGING DOOR OPENING IN EITHER DIRECTION! Perhaps something to think about for the future.
You have presented a great tutorial. If you ever set up these closers to allow the door to swing 180°. There seem to be much confusion in the construction world on how to go about this without the closure binding before the door Reaches its full swing.
Very helpful video but I was failing totally to adjust the two speed control screws correctly until I realised my door was a left push and opposite to yours which meant the valve screws were the other way round! Doh!
No awl to create a guide hole prior to drilling?! You're a maniac. I love it!! What bit holder are you using on your Makita? I'm referring to the thicker segment with the green band. I just searched, but couldn't find it.
If your still wondering what type of bit he’s using, it’s a Wera bit holder. I can praise these bits as top of the range as I’m a joiner of 8 years and these are the only ones that seem to last. Hope this helped 5 months later haha
I've seen this being done recently very dangerous due to the weight of the door closer simply get a block of thick wood measure your door with then use the strongest glue in the world to stick to the glass and bobs Ur uncle carefully fit the door closer onto the wood on glass door then attach the arm to the frame just make sure the arm isn't 2 strong 💪 make the arm weak so when the door closer closes the door there isn't excess pressure put onto the glass door
Always look to an English professional for exact fitting and explanation. Very well done thanks. And I’m an Aussie.
Excellent demonstration. I fitted one of these and made much simpler with this clear methodical explanation.
Done 100s all on pull side my first push one tomorrow thanks so much for a great vudio perfect
La mejor explicación en todo TH-cam
2019 ... Helped a lot !!! Thanks for the content !!!
Just bought one of these, arm not shown on any of the instructions. TS5204BBCDA - TO BE CLEAR ARM NOT SHOWN ON INSTRUCTIONS FOR HANGING DOOR OPENING IN EITHER DIRECTION! Perhaps something to think about for the future.
Great instructions, many thanks....
How do you adjust the tension, I can hardly open the door!!
Can it be installed vertically? To a door that opens 180 degrees from top to bottom?
You have presented a great tutorial. If you ever set up these closers to allow the door to swing 180°. There seem to be much confusion in the construction world on how to go about this without the closure binding before the door Reaches its full swing.
Roger Schultz I have a 5 inch difference between the door and the jam above, have a thick wall. What difference will that make?
Very helpful video but I was failing totally to adjust the two speed control screws correctly until I realised my door was a left push and opposite to yours which meant the valve screws were the other way round! Doh!
hopefully you'll remember to view the valve adjustments +/- symbols next time ;-) all good lessons though :-)
good engineering and demo..thanks
very very good door closer i am happy
No awl to create a guide hole prior to drilling?! You're a maniac. I love it!! What bit holder are you using on your Makita? I'm referring to the thicker segment with the green band. I just searched, but couldn't find it.
If your still wondering what type of bit he’s using, it’s a Wera bit holder. I can praise these bits as top of the range as I’m a joiner of 8 years and these are the only ones that seem to last. Hope this helped 5 months later haha
How can I install a door closer on a glass door without any frame on it
I've seen this being done recently very dangerous due to the weight of the door closer simply get a block of thick wood measure your door with then use the strongest glue in the world to stick to the glass and bobs Ur uncle carefully fit the door closer onto the wood on glass door then attach the arm to the frame just make sure the arm isn't 2 strong 💪 make the arm weak so when the door closer closes the door there isn't excess pressure put onto the glass door
Thank you sir. India.
where can I order this product?
Great video, however could just put the upper plate on first , that’s how I did it
Doğru uygulama.Teşekkürler.
Thank you!!!!!!!!!!!!!!!!
I've got 5/6 no 3 briton closers if anyone interested. 25?
do they c0me delayed action back check and other features how much are they lastly what model is it you can reply to my email khzahir2@hotmail.com
Tener más explicación en audio en español
What language is his speaking is he German
I m in India how to get this product?
Good sir G
is this not 'Pullside'? door closer is pulling the door isnt it?
The closer is mounted on the side which the user "pushes" the door open.
Walmart Authentic door