I did it by myself !!! I’m a 62 year old widow and I followed your instructions and materials exactly. My late husband had most everything needed in his shop, even the concrete. Thank you so much for your video. I am also using mine for firewood storage since I have had to learn how to cut my own for my only source of heat.
That's awesome to hear, about you building not about your husband, so terribly sorry to hear your loss. My wife and I are 31 and 33 respectively and we're just coming to the time in our life where we're giving thought to the later years, you know how it is in your 20's lol it's like 30 is never going to come and you're never going to get old..... But I cried thinking of the hypothetical situation if something were to happen to me at work what would she have to do if I were gone and it were only her and our three children, I pray she has your strength and willpower to keep accomplishing things. Sending my very best to you ma'am 🙏
Same my adult kid has no interest or skill & i want a simple way to build a awning or lean too roof over north door & have a old freezer out in elements I want it dry about 4 feet out away from house & maybe put west end 4 ft wall to cut that north west wind & snow a bit. My house is 140 years old small 1 story prairie house. Have been looking for a simple way to get my roof extended that I could manage. Ive you tube surfed for 3 years trying to find something like this. Im not living in it just want the rain/snow off & get that mess away from house where we walk in. & maybe hang a couple flower baskets in summer. I'm so tickled.
I just wanted to drop a "Thank you" for the video. My wife wanted to build a lean to off of our unused shed so we can turn it into a chicken coop. I probably spent more time fumbling through the unkept isles of Lowes than I did actually building the lean to. The only thing I messed up was I went overboard on the purlins. But now that I've got one lean to complete, it's time to do a bigger one now. 😁😁 Thanks for the simple but concise instructions.
Seems pretty straight forward...then again, I'm a 59 year old woman who is trying to learn how to do things myself from watching videos. They all seem fairly simple. My first attempt at building something was a decorative fence, using wire cages, and rocks to hold the 4x4 posts. No matter how many times I measured anything to do with the project, I never seemed to be able to get it right (fortunately came up with a way to hide all of those bad cuts😏). It's always way harder than I think. Just have to keep practicing, on things that are decorative in nature, until I get better at this building thing. It seems that finding a good, honest handyman to help me is just as hard as trying to do it myself. Thanks for the great video! ❤️🌵☀️⛈️🌈☮️🐎
Thrilled to see your post. I'm a 65 year old farm lady. This video helped a lot, but I hate the "hey guys..." part. Have you seen April Wilkerson videos. She's an inspiration!!
Im Proud of all of you the only way humans learn is making mistakes. Its impossible to learn with no mistakes. Keep doing what you love and Please have a Happy Life 🙏🙏👍🏼👍🏼🤝🏼
Love your little helper! Everybody should have one of those! Mine are all grown up, so all i get now is a bunch of feral cats that i feed daily showing me how much they love me by being into everything i do outside! Great work, by the way! Thank you for sharing.
Excellent Video. As a fellow DIYer, I found the video imaging remarkably clear and the instructions were well-explained. As a father, my favorite part was when your son was helping you.
Good job!! just a suggestion, you can knotch out the top of the 4x4 post so that the 2x6 directs load to post rather that screws. makes for a stronger build.
Wouldn't even worry about that with something like this. That roof you could pretty much lift off single handedly. Majority of pergola's you see are held together with coach bolts so yeah, same concept
Can you translate “notch out the top of the 4x4 post….” in simple terms for the rest of us? I’m about to do this project myself and I’d like to know what you mean because I have no clue watch notching means or does other than makes it stronger…
@@IGK58 At 3:04 you see him screw a 2x6 to his posts. Instead of doing this, you cut out part of the top of the 4x4, so that the 2x6 sits on top of a notch. You just make these cuts with your circular saw and the 2x6 will fit in the opening you create. Your 4x4 top will look like it has a little edge for the 2x6 to sit on. Many call it a LAP JOINT. This will distribute the load down the 4x4 instead of on the screws you used to mount the 2x6. I too am going to build this in a few days, and I think cutting out a notch is a wise idea.
I have always poured a pier first then used a bracket for the 4x4 thus keeping the 4x4 from earth contact. Has lasted over 30 years that way thus far. Just a thought. Great job, now I need one!
@@2nostromo Depends. They have ground contact wood just for this application. Or you can use a used railroad tie with 80 years of creosote, it will last another 80.
Perfect video to explain how to build a lean to on a metal building, which is exactly what I needed, no extra steps, no frills just the lean on, love it!
nice video for a simple lean to project. i would recommend at the top edge of the roof where the black metal meets the metal building putting a large bead of exterior silicone, caulk, or even roofing tar to seal out that joint. Stormwater will find its way into that open joint against the building and over time saturate and deteriorate the ledger board. Water can find its way into the shed through the screw holes too.
@@awildapproach welcome! my recommendation would be the tube of roofing cement, once it fully cures it is rubber-like and should hold up better over time than standard caulk or silicone.
This detail is what I was looking for when searching YT for lean to methods, but it looks like this person is relying on the corrugated ridge to be a drip edge, which like you said it won’t, and surface tension will wrap water along the main building steel onto the top of the ledger. Thinking about caulking the ridged profile of the end of the lean to corrugated to the flat horizontal building metal, that will be a wide and varied joint to caulk. One thought is to use an L flashing horizontal on and caulked to the main building metal and overhanging the lean to roof metal, allowing a flat continuous caulking surface and a drip edge to kick the water into the lean to roof. Rather than trying to follow the corrugated undulations with caulk. Alternatively, I suppose you could make the cut on the roof corrugated metal at a miter matching the angle of the roof pitch to flush the profile of the corrugated roof to the horizontal wall surface, and caulk that. The drip edge l channel is probably more forgiving.
I plan on doing something like this within the next year on the back of my home. It's going to take up the whole length of the house so I can have a covered patio area. Wish me luck...
Good luck! For that application, you will want to include a peice of flashing between the roofing and your home! Just wanted to mention that since I didn't use flashing in the video
Good job. It looks great! My only suggestion would be to put some concrete in the bottom of the post hole before you put the posts in. When you put the post in the hole first, then surround it in concrete you leave the bottom of the post exposed to the dirt. It will slowly rot from the bottom up over the years. The wood acts like a straw and will suck water up into it from the dirt that it contacts.
Yeah, but then you have a concrete cup the post is sitting in. Best to put some coarse gravel down there to allow drainage while still creating a barrier from the soil
I cemented 4 x 4 posts into the ground when putting in a fence around my home in Florida and after about 30 years the posts began rotting out where the cement was. I replaced the rotted out posts with new 4 x 4's but instead of cement put in crushed limestone to allow the water to seep past the wood. I think this might be better than cement but 30 years is still great. Thanks for the post
One solution to prevent the post from rotting is to first start with pressure-treated wood. Then coat the part of the post that will be below ground with a good heavy coat of black fence post paint. I like to use two coats. Now put that on top of a 4 -6 inch layer of compacted crushed stone in the bottom of the hole then pour the concrete around that. That's about as close to a forever post as you can get. If you cut your posts in the process of the build, especially the tops of the post, it's a good idea to coat those cuts with some form of sealant since you removed the PT chemicals when you made a cut. Happy fencing!!
Paint the bottom that will be going into the ground, I also add 4 screws going into the wood at a angle so the concrete has something to grab onto for a better hold. Add some small rock at the very bottom to allow drainage away from the wood. Make sure to tamp it down to get it as flat as possible. Since you can cut the tops like he did in the video, it won't matter if they are even.
Man, this video on "how-to build a lean-to on an existing building" SUCKS!!! Nah, I'm just messing with you. Honestly this is the BEST video that I've seen so far when searching for "how to build a lean to" videos. Most of the other videos out there are way to long with way too much happening and nothing really being explained in simple terms or if it is explained it's way to much info. By the time you finish watching the long videos, you no longer feel motivated to start ypur own projecy. But your video was only 10 minutes long and yet you showed and explained the whole build plus you made it look so easy that I'm just going to start doing my project. Simple easy and straight to the point. Like I said the best video that I've seen so far.
I made on of those over a concrete slab, After finishing it just like you did I added half inch insulation under and a metal trim around the roof. Thanks for sharing,
thank you for the nice info it saves people money when they can do it them selfs. done a lot of repairs on my car with instruction videos like this easy to follow. will do this on my house this summer. thk you.
Nice demonstration, thanks! I’m no pro either, just a retired guy, and I could definitely reproduce this project on my barn now that I’ve seen you do it. Hmm, I could use some extra storage too…
Excellent video again. Building my own lean-to type in several weeks. for mine, it is going to begin from under a roof overhang of a tool shed so the flashing won't be necessary for my build. I like the idea of blockings between the truss/joists rather than on-top perlins. I'm still saving up for those thin corrugated metal sheets.
Great video! Looking through videos for a simple lean to and everyone had to go full on build mode. Glad you have an easy solid option for some storage space. Wonder if you could add metal siding to the sides too make it a little more weather proof from the elements.
exactly how my dad told me to do it. I'm going to make it a lean to greenhouse. Well really a covered raised garden bed to keep the squirrels out. thanks for the video
Super nice job. I'm building a shelter for my hot tub. I live in Canada and we get shit tons of snow so I decided to build a lean to to get the snow off easily. This video has helped me simplify my plans alot. Thank you for posting.
Are you going to build to a snow load spec? I am moving to an area that gets a ton of snow. Curious what tour thoughts are and how to build to a snow load spec
Heck yeah. Great information sharing. Ive been needing to build a lean to for my lawnmowers and ysrd equipment.. But Ive been putting it off . I'll be building one of these this weekend. Awww jo .
I'm going to be building one on the back of my house. 6 wide by 8 deep just big enough to completely cover my zero turn. I also plan on putting side on the lean to to help keep rain and sun off the machine.
Those joist hangers have tabs on them that you're meant to hit with a hammer after placing it where you want. Just holds it in place until you can get some screws in it.
This is so perfect. Your lean-to is exactly the lean-to that I need for the side of our garage, and I'm using your design exactly. And mine is also for firewood, so that's double awesome. Thank you.
Same here lol I was worried about attaching to vinyl siding. Also concerned about what gets stuck on top of the attachment. Does the roofing get flashing?
@@Robiobass2 not sure yet. I made it 12' long, and 5' deep. The low part of the roof is about 6 1/2' (a moderate pitch) up to about 8' at the side of the garage.
I am going with j channel on top of my 2x6 for the roofing metal to slide into. I'll use clear silicone to seal out the elements between the two vinyls. That should be good enough to keep the debris out. Mine is under a huge pine tree and needles get everywhere.
I've done a few of these and I prefer tohave the posts 'float' about two inches off of the ground using 'Allthread', washers and nuts (washer / nut / nut / washer). These are inserted upwards into drilled holes aand downwards into the concrete pads. These allow for fine tuning by turning the nuts.
The only thing I would have done differently is seal the lean to at the wall both on top and bottom. I built a porch once on a moble home the same way, I had a problem down the line by not sealing it.
2 things: Did the job by yourself but said "we" and "we're" about 100 times lol, and good craftsmanship, I bet it'll outlast all of us! Looking to do the same but with walls for my two crotch rockets. Will def incorporate some of your ideas
If the lean to is 10 wide can you use just 2 posts? Oh, thanks for great video and showing how it can be done so simply. Love that your teaching your youngster too and getting him involved so young. That is so great!!!
im wanting to do somthing like this to my house but i was told you need to have flashing on the top going behind the siding to prevent water getting in and causing rot (vinyl siding)
I did it by myself !!!
I’m a 62 year old widow and I followed your instructions and materials exactly. My late husband had most everything needed in his shop, even the concrete. Thank you so much for your video. I am also using mine for firewood storage since I have had to learn how to cut my own for my only source of heat.
That's awesome to hear, about you building not about your husband, so terribly sorry to hear your loss. My wife and I are 31 and 33 respectively and we're just coming to the time in our life where we're giving thought to the later years, you know how it is in your 20's lol it's like 30 is never going to come and you're never going to get old..... But I cried thinking of the hypothetical situation if something were to happen to me at work what would she have to do if I were gone and it were only her and our three children, I pray she has your strength and willpower to keep accomplishing things. Sending my very best to you ma'am 🙏
That is awesome!
Robin I was thinking a wood shed would be the perfect application for this and my intentions as well. God bless and thanks for sharing.
Good for you.
Congrats Robin! Good job!
I’m a 66 yr old woman who needs to build a lean to so this was a good video for me. I can do this. Thanks
Just turned 69 and I'm going to do the same on the back of my house
Same my adult kid has no interest or skill & i want a simple way to build a awning or lean too roof over north door & have a old freezer out in elements
I want it dry about 4 feet out away from house & maybe put west end 4 ft wall to cut that north west wind & snow a bit.
My house is 140 years old small 1 story prairie house. Have been looking for a simple way to get my roof extended that I could manage. Ive you tube surfed for 3 years trying to find something like this. Im not living in it just want the rain/snow off & get that mess away from house where we walk in. & maybe hang a couple flower baskets in summer.
I'm so tickled.
You go girl you got this lol
I just wanted to drop a "Thank you" for the video. My wife wanted to build a lean to off of our unused shed so we can turn it into a chicken coop. I probably spent more time fumbling through the unkept isles of Lowes than I did actually building the lean to. The only thing I messed up was I went overboard on the purlins. But now that I've got one lean to complete, it's time to do a bigger one now. 😁😁 Thanks for the simple but concise instructions.
This project wouldn't have been possible without the good helper you had. Kudos to your little helper!
Seems pretty straight forward...then again, I'm a 59 year old woman who is trying to learn how to do things myself from watching videos. They all seem fairly simple.
My first attempt at building something was a decorative fence, using wire cages, and rocks to hold the 4x4 posts. No matter how many times I measured anything to do with the project, I never seemed to be able to get it right (fortunately came up with a way to hide all of those bad cuts😏).
It's always way harder than I think. Just have to keep practicing, on things that are decorative in nature, until I get better at this building thing.
It seems that finding a good, honest handyman to help me is just as hard as trying to do it myself.
Thanks for the great video!
❤️🌵☀️⛈️🌈☮️🐎
Thrilled to see your post. I'm a 65 year old farm lady. This video helped a lot, but I hate the "hey guys..." part. Have you seen April Wilkerson videos. She's an inspiration!!
Wow! I’d love to that . Can you show me your project ? Please
You are not alone Laurie.
Im Proud of all of you the only way humans learn is making mistakes. Its impossible to learn with no mistakes. Keep doing what you love and Please have a Happy Life 🙏🙏👍🏼👍🏼🤝🏼
Outstanding ❤❤❤
Honestly, this is exactly what I needed to see for our remote cabin. Thanks my patriot friends.
Love your little helper! Everybody should have one of those! Mine are all grown up, so all i get now is a bunch of feral cats that i feed daily showing me how much they love me by being into everything i do outside! Great work, by the way! Thank you for sharing.
Excellent Video. As a fellow DIYer, I found the video imaging remarkably clear and the instructions were well-explained. As a father, my favorite part was when your son was helping you.
Good job!! just a suggestion, you can knotch out the top of the 4x4 post so that the 2x6 directs load to post rather that screws. makes for a stronger build.
Good suggestion!
Wouldn't even worry about that with something like this. That roof you could pretty much lift off single handedly. Majority of pergola's you see are held together with coach bolts so yeah, same concept
Can you translate “notch out the top of the 4x4 post….” in simple terms for the rest of us? I’m about to do this project myself and I’d like to know what you mean because I have no clue watch notching means or does other than makes it stronger…
@@IGK58 At 3:04 you see him screw a 2x6 to his posts. Instead of doing this, you cut out part of the top of the 4x4, so that the 2x6 sits on top of a notch. You just make these cuts with your circular saw and the 2x6 will fit in the opening you create. Your 4x4 top will look like it has a little edge for the 2x6 to sit on. Many call it a LAP JOINT. This will distribute the load down the 4x4 instead of on the screws you used to mount the 2x6. I too am going to build this in a few days, and I think cutting out a notch is a wise idea.
@@kennethbowles4049 Circular saw can not cut 6" deep. Reciprocating Saw can do that.
I have always poured a pier first then used a bracket for the 4x4 thus keeping the 4x4 from earth contact. Has lasted over 30 years that way thus far. Just a thought. Great job, now I need one!
treated wood rots at the soil line. well worth the effort to use your method.
@@2nostromo Depends. They have ground contact wood just for this application. Or you can use a used railroad tie with 80 years of creosote, it will last another 80.
Perfect video to explain how to build a lean to on a metal building, which is exactly what I needed, no extra steps, no frills just the lean on, love it!
For a non professional carpenter. Its a good job , well done bro. Got my respect man 😎🙏
nice video for a simple lean to project. i would recommend at the top edge of the roof where the black metal meets the metal building putting a large bead of exterior silicone, caulk, or even roofing tar to seal out that joint. Stormwater will find its way into that open joint against the building and over time saturate and deteriorate the ledger board. Water can find its way into the shed through the screw holes too.
thank you for saying that. I was watching this and wondering if caulk was needed. Now I know! :)
@@awildapproach welcome! my recommendation would be the tube of roofing cement, once it fully cures it is rubber-like and should hold up better over time than standard caulk or silicone.
@@slo232000 Thank you so much! Will do!
Should have went to a seam in the metal siding and flashed the roof would’ve been the most correct way
This detail is what I was looking for when searching YT for lean to methods, but it looks like this person is relying on the corrugated ridge to be a drip edge, which like you said it won’t, and surface tension will wrap water along the main building steel onto the top of the ledger. Thinking about caulking the ridged profile of the end of the lean to corrugated to the flat horizontal building metal, that will be a wide and varied joint to caulk. One thought is to use an L flashing horizontal on and caulked to the main building metal and overhanging the lean to roof metal, allowing a flat continuous caulking surface and a drip edge to kick the water into the lean to roof. Rather than trying to follow the corrugated undulations with caulk. Alternatively, I suppose you could make the cut on the roof corrugated metal at a miter matching the angle of the roof pitch to flush the profile of the corrugated roof to the horizontal wall surface, and caulk that. The drip edge l channel is probably more forgiving.
Using existing tools and materials to get the job done is what i was looking for. Useful no spending $, thanks for a raw video!
EXACTLY what I needed, done in a personable and concise fashion. Many thanks you are a natural teacher and I send you and yours my best.
Thanks!
What a pleasure to watch handy man creating something awesome! Thank you for great tutorial!
I plan on doing something like this within the next year on the back of my home. It's going to take up the whole length of the house so I can have a covered patio area.
Wish me luck...
Good luck! For that application, you will want to include a peice of flashing between the roofing and your home! Just wanted to mention that since I didn't use flashing in the video
Good job. It looks great! My only suggestion would be to put some concrete in the bottom of the post hole before you put the posts in. When you put the post in the hole first, then surround it in concrete you leave the bottom of the post exposed to the dirt. It will slowly rot from the bottom up over the years. The wood acts like a straw and will suck water up into it from the dirt that it contacts.
Yeah, but then you have a concrete cup the post is sitting in. Best to put some coarse gravel down there to allow drainage while still creating a barrier from the soil
So does the ledger board just attach straight in tge sheet metal?
@@dylanheflin3666 through the metal preferably fastened into every stud you can possibly fasten to
Could bricks at the bottom help with this ? So the post sit on the brick and then get surrounded by concrete?
Wife’s gonna build this for me thanks for the ideas!
We'll be building this onto an existing shed for some additional low cost storage. Thank you for the easy to understand instructions.
Excellent Job ! The Narration, Time Lapse and Descriptions were spot on !
I’m building a shed and haven’t decided what to do about adding a porch to it. You gave me some ideas I hadn’t thought of. Great video.
Thanks
I cemented 4 x 4 posts into the ground when putting in a fence around my home in Florida and after about 30 years the posts began rotting out where the cement was. I replaced the rotted out posts with new 4 x 4's but instead of cement put in crushed limestone to allow the water to seep past the wood. I think this might be better than cement but 30 years is still great. Thanks for the post
One solution to prevent the post from rotting is to first start with pressure-treated wood. Then coat the part of the post that will be below ground with a good heavy coat of black fence post paint. I like to use two coats. Now put that on top of a 4 -6 inch layer of compacted crushed stone in the bottom of the hole then pour the concrete around that.
That's about as close to a forever post as you can get. If you cut your posts in the process of the build, especially the tops of the post, it's a good idea to coat those cuts with some form of sealant since you removed the PT chemicals when you made a cut. Happy fencing!!
Paint the bottom that will be going into the ground, I also add 4 screws going into the wood at a angle so the concrete has something to grab onto for a better hold.
Add some small rock at the very bottom to allow drainage away from the wood. Make sure to tamp it down to get it as flat as possible.
Since you can cut the tops like he did in the video, it won't matter if they are even.
Man, this video on "how-to build a lean-to on an existing building" SUCKS!!!
Nah, I'm just messing with you. Honestly this is the BEST video that I've seen so far when searching for "how to build a lean to" videos. Most of the other videos out there are way to long with way too much happening and nothing really being explained in simple terms or if it is explained it's way to much info. By the time you finish watching the long videos, you no longer feel motivated to start ypur own projecy. But your video was only 10 minutes long and yet you showed and explained the whole build plus you made it look so easy that I'm just going to start doing my project. Simple easy and straight to the point. Like I said
the best video that I've seen so far.
Happy to help
Awesome build..... This is exactly what I want to do on the side of my barn. Thanks for the info!
I think it came out so good because you had such a good helper.😊
I made on of those over a concrete slab, After finishing it just like you did I added half inch insulation under and a metal trim around the roof. Thanks for sharing,
Do a Country Cajun Living Dry Pour and the slab is easy.
love the young helper-I have one of my grandsons that is just the same
thank you for the nice info it saves people money when they can do it them selfs. done a lot of repairs on my car with instruction videos like this easy to follow. will do this on my house this summer. thk you.
Nice demonstration, thanks! I’m no pro either, just a retired guy, and I could definitely reproduce this project on my barn now that I’ve seen you do it. Hmm, I could use some extra storage too…
Appreciate the tips, small world, nice meeting you this morning lol
Great video, exactly what I was looking for, straight forward, no BS. Great time invested with your boy. Strong work.
Excellent video again. Building my own lean-to type in several weeks. for mine, it is going to begin from under a roof overhang of a tool shed so the flashing won't be necessary for my build. I like the idea of blockings between the truss/joists rather than on-top perlins. I'm still saving up for those thin corrugated metal sheets.
Looks like you had a good helper.
Great video! Looking through videos for a simple lean to and everyone had to go full on build mode. Glad you have an easy solid option for some storage space. Wonder if you could add metal siding to the sides too make it a little more weather proof from the elements.
I was wondering the same thing. This looks like a good solid structure to put some siding on.
Just add boards and siding. Easy upgrade.
Thanks for keeping it simple. Gonna make same just bigger with shingles.
Looks like you got a little helper 😉
exactly how my dad told me to do it. I'm going to make it a lean to greenhouse. Well really a covered raised garden bed to keep the squirrels out. thanks for the video
Looks like a great place to add a couple solar panels
Great job and the good way to explain 👍🙏🇩🇰
Excellent video 📹 for my project to shelter my water well carbon filter tanks and water softener equipment...thanks for sharing 👍
Super nice job. I'm building a shelter for my hot tub. I live in Canada and we get shit tons of snow so I decided to build a lean to to get the snow off easily. This video has helped me simplify my plans alot. Thank you for posting.
Are you going to build to a snow load spec? I am moving to an area that gets a ton of snow. Curious what tour thoughts are and how to build to a snow load spec
I wish all the specialists on here that comment wld make a video of how they do it!🤔 great job and thanks for your time!❤️❤️
Very helpful video for the diy folks.
Heck yeah. Great information sharing. Ive been needing to build a lean to for my lawnmowers and ysrd equipment.. But Ive been putting it off . I'll be building one of these this weekend. Awww jo .
Found the original video. Ty now tomorrow I have a game plan. Ty. New sub
Some flashing where the roof meets the wall would be nice.
Fantastic. Thanks for making this video. I can now build my own.
Great video keep them coming., simple and straightforward. I need to do this over my 12x10 deck.
Hey great 👍 only thing I would recommend is through Bolts @ your carry Beam...good deal
Using this to help build my lean to roof for my tiny house
I’m thinking this would be a great way to roof a small portion of my deck! The metal is perfect!!
Thanks man Best I've found
Love your little helper!
I'm going to be building one on the back of my house. 6 wide by 8 deep just big enough to completely cover my zero turn. I also plan on putting side on the lean to to help keep rain and sun off the machine.
Flash the roof to your building. Came out nice
Exactly what I was thinking.
Great little helper. 👍
Excellent video, I'll try to make it this weekend, I need it for my future mower, thanks for sharing your skills
The EXACT information I needed for a project!
Those joist hangers have tabs on them that you're meant to hit with a hammer after placing it where you want. Just holds it in place until you can get some screws in it.
You can use screws for joist hangers...screws are not structural.
@@boris9305😂 You know they sell screw on joist hangers, right?
@@boris9305structural screws are most definitely structural....
Clamps and tape are the lone DIYers best helpers. 👍👍🇺🇸
Good job looking good and thank you for sharing enjoyed it
Great vid! Thanks for posting.
Really like how you used the 2x4s to help hold the first 2x6 up.
This is so perfect. Your lean-to is exactly the lean-to that I need for the side of our garage, and I'm using your design exactly. And mine is also for firewood, so that's double awesome. Thank you.
Same here lol I was worried about attaching to vinyl siding. Also concerned about what gets stuck on top of the attachment. Does the roofing get flashing?
@@Robiobass2 well, I'm attaching to a wooden structure with an eve that hangs over about 10", so I'm good on those points.
@@carlrudd1858 how wide are you going? I have about 3 rows deep in firewood. I'm thinking 6 ft also
@@Robiobass2 not sure yet. I made it 12' long, and 5' deep. The low part of the roof is about 6 1/2' (a moderate pitch) up to about 8' at the side of the garage.
I am going with j channel on top of my 2x6 for the roofing metal to slide into. I'll use clear silicone to seal out the elements between the two vinyls. That should be good enough to keep the debris out. Mine is under a huge pine tree and needles get everywhere.
Nice build! i have a small shed I'm building an addition to. Thanks for sharing .
level square and true and good overhang good job good vid
Best simple video ever. Thank you!
Thank you! Just exactly what I needed to know.
Thank you for being such a brave patriot.
Just come across your channel I’m from UK, great stuff really enjoyed how u work, I’m a diy’er good to get ideas from others subscribed
This is EXACTLY what I had in my mind, THANK YOU so much!!
I think it looks great! ❤
I've done a few of these and I prefer tohave the posts 'float' about two inches off of the ground using 'Allthread', washers and nuts (washer / nut / nut / washer). These are inserted upwards into drilled holes aand downwards into the concrete pads. These allow for fine tuning by turning the nuts.
Great Work does the job thank you very much
Yep. Great video. Thanks
Great video. Love the music too!
The only thing I would have done differently is seal the lean to at the wall both on top and bottom. I built a porch once on a moble home the same way, I had a problem down the line by not sealing it.
What would you use to seal and how?
@@justinrampersaud1948 I used a clear rubber based chalk. Make sure surface is dry.
@@robertwalley6692 thanks
Great video - clear instructions during construction - very helpful. Thank you..
Great lessons. Thanks from TN.
Excellent Bill outstanding
Great video. You have inspired and helped me plan the exact same lean-to.
2 things: Did the job by yourself but said "we" and "we're" about 100 times lol, and good craftsmanship, I bet it'll outlast all of us! Looking to do the same but with walls for my two crotch rockets. Will def incorporate some of your ideas
Well you are forgetting my 2 little helpers....also, the collective WE of everyone watching the video and building along with me! Lol
@@PatriotDIY My man
Do you have a list of all the supplies you used? Thanks for the video.
Looking for a way to build a lean on my shed. This is by far the simplest way...I'll probably use I'll use Concrete Blocks for my posts....Thank you..
Thank you! Getting ready to do this on the side of my shop. Very helpful!
Nice and simple
If the lean to is 10 wide can you use just 2 posts? Oh, thanks for great video and showing how it can be done so simply. Love that your teaching your youngster too and getting him involved so young. That is so great!!!
You may be OK with just 2 post at 10 feet
Thanks for another great DIY how to
Hi, was that just a regular joist hanger you used? I'm having trouble locating angled joist hangers locally. ty
Just regular hanger
What do you do if the metal ridges are running vertical ?
I was wondering how you flash where the roof joins the wall?
Excellent job.
How did you determine where to put the post to keep them square with the 2x6 in the wall?
Spent alot of time measuring and staking out strings
That was great, I just might do that!!!
This is exactly what I needed😊
Superb take a bow sir 👏👏👏👏
Nice build. What about flashing for waterproofing at the roof/siding join ?
Fixing to build something similar to store surfboards.
Thanks
Flashing would be best but I wasn't satisfied with what I found so I just butted the roofing right to the wall and siliconed it.
im wanting to do somthing like this to my house but i was told you need to have flashing on the top going behind the siding to prevent water getting in and causing rot (vinyl siding)
@ataxias8183 yes if this is on your house you should use flashing
Very 👍 nice
I would have put about 1’ of drain rock in the bottom before placing the posts. All in all a good job.
Thats what i thought
and when it rains the 1 inch will fill up in 1 minute and the post will be sitting in water as if the rock was never there.