My window rolled down and never came back up. Big storm coming in and the sicada season is starting. Bought a replacement motor at autozone and followed along step by step in the parking lot. All in all it took about an hour and a half. This video was a lifesaver and a money saver. Two thumbs up!
The dealership charged me over $900 to have one of these replaced. 2 years later and I need to replace it again. Needless to say I will not be sending it back to the dealership. You saved me a lot of time, money and frustration. Thank you so much man!!!!! Appreciate you!
Absolutely the most complete and detailed How To Video I've ever seen! You guys did a fantastic job. You made replacing my motor and regulator on my 2004 Titan an actual pleasure instead of a stressful experience! All I can say is thank you.
Excellent, excellent, excellent Nissan go-to window video on youtube. I'm an older woman, not mechanically inclined, and I was able to follow and replace the regulator and motor on our Nissan truck. This video saved us a ton of money since I have 2 windows to fix.
This is a great and detailed direction. I used to be a mechanic and this is one of the best tutorials I've seen. Thank you so much for your quality production.👍
To answer a couple of comments I saw below, yes there is a small courtesy light at the bottom of the door inside panel that wasn't mentioned. I didn't think it had an electrical connector, but it does, the white connector just pulls out from the bulb holder assembly. Also, you never said how you got the window down to the midpoint level in order to access the two bolts to the regulator. I just plugged in the control panel, like you demonstrated at the end of the video to test everything before reassembling the door, and moved the window down to the level where I could see the forward mounting bolt through the metal opening. Someone asked how was he going to get the window to go down since it stopped working. I'd try pressing the down button and then try helping to force the window to go down at the same time, kind of like helping the motor along. There are also other videos that show spraying silicone spray into the side seals of the windows can help with dry or dirty rubber window seals. I'd also try using silicone spray and a shop towel wrapped around a small screw driver to help clean out all the dirt that can build up in the horizontal window seal. My truck lives outside and after nearly 20 years I was blown away by how much dirt had built up in this horizontal seal. After I cleaned and sprayed all the seals with silicone, my window was able to be coaxed/helped back up, and going down also got much easier. But I still replaced my nearly 20 year old tired window motor and regulator, and now my window works like the day I brought it home from the dealer.
Great video - Sorry I already had the replacement part but thanks to the video and during deconstruction of the door and motor I realized I didn't even need it to do the repair. However I do know how the window works which I didn't before. Thank you.
Great Vid!! You took your time and went step by step. Aside from helping me out, I'm positive it's going to help out a lot of other people down the road. Thank you for taking the time to make the vid, it is appreciated 👍
I want to thank you for the video,only one part was confusing when you took it out looked the the motor was attached to the bar or regulator when I took mine out I could have seen my was attached input it back in wouldn't go up looked like it was binding,I took it back out put it back in motor by itself,and it worked,
Hey I'm about to buy an 06 Nissan titan with the window stuck down. Will I have issues accessing the front window bolt? Or is there a way to manually raise the window to get access?
my window its dead wont roll down so would i get it down to remove the regulator where i would need to remove the bolts/screws that holds the window to the regulator? thanks
You said you need to take the two mounting regulator bolts out however the regulator was bad and stuck in a position where you couldn't access the other bolt. You removed the second bolt off scene and didn't even show how you got it out. Not helpful
If the window will go down but not respond at all when you pull the button up(doesnt click or anything on the driver main switch or the passenger switch), but does when you hit the button to go down(sometimes), that means its the motor, right? Its had issues going up and down, SUPER SLOWLY, for a long time and i think its just burnt out. Sometimes had to assist it going up. In your professional opinion, would changing out the motor(s) on it fix it? Like i said, the driver windows motor has been going out for a long time. It will roll down but wont go back up without MAJOR assistance. So i dont roll it down at all. But i can pull the switch up like im rolling the window up(with it all the way up) and the motor still clicks. Passenger window will go down with the driver switch and passenger switch most of the time, but it wont even click with either switch when you try to roll it up.
Why didnt show the change of the piece in minute 8:50 and the different part where the square piece goes into in minute 8:59? Amazing video though. I just paid 100 bucks for changing out the whole thing. Could have saved myself the hunski.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
My window rolled down and never came back up. Big storm coming in and the sicada season is starting. Bought a replacement motor at autozone and followed along step by step in the parking lot. All in all it took about an hour and a half. This video was a lifesaver and a money saver. Two thumbs up!
The dealership charged me over $900 to have one of these replaced. 2 years later and I need to replace it again. Needless to say I will not be sending it back to the dealership. You saved me a lot of time, money and frustration. Thank you so much man!!!!! Appreciate you!
extremely well produced for those of us that don't do this for a living
Absolutely the most complete and detailed How To Video I've ever seen! You guys did a fantastic job. You made replacing my motor and regulator on my 2004 Titan an actual pleasure instead of a stressful experience! All I can say is thank you.
Excellent, excellent, excellent Nissan go-to window video on youtube. I'm an older woman, not mechanically inclined, and I was able to follow and replace the regulator and motor on our Nissan truck. This video saved us a ton of money since I have 2 windows to fix.
Best instructional video ever... Every step of the way... Thanks...
This is a great and detailed direction. I used to be a mechanic and this is one of the best tutorials I've seen. Thank you so much for your quality production.👍
Thank you for this video, I replaced my motor and it works! You’re a hero.
I just did my 2010 Nissan Armada. Awesome instructions. Thank you!!
Thank you man, you saved me a ton of moola 😂
To answer a couple of comments I saw below, yes there is a small courtesy light at the bottom of the door inside panel that wasn't mentioned. I didn't think it had an electrical connector, but it does, the white connector just pulls out from the bulb holder assembly. Also, you never said how you got the window down to the midpoint level in order to access the two bolts to the regulator. I just plugged in the control panel, like you demonstrated at the end of the video to test everything before reassembling the door, and moved the window down to the level where I could see the forward mounting bolt through the metal opening. Someone asked how was he going to get the window to go down since it stopped working. I'd try pressing the down button and then try helping to force the window to go down at the same time, kind of like helping the motor along. There are also other videos that show spraying silicone spray into the side seals of the windows can help with dry or dirty rubber window seals. I'd also try using silicone spray and a shop towel wrapped around a small screw driver to help clean out all the dirt that can build up in the horizontal window seal. My truck lives outside and after nearly 20 years I was blown away by how much dirt had built up in this horizontal seal. After I cleaned and sprayed all the seals with silicone, my window was able to be coaxed/helped back up, and going down also got much easier. But I still replaced my nearly 20 year old tired window motor and regulator, and now my window works like the day I brought it home from the dealer.
This video really helped me do this job. Not that its done, I don't know what I was worried about.. its actually a pretty easy job! Thanks!
+Paton MacDonald Thanks for watching our video! 1aau.to/m/Shop-TRQ
Great video - Sorry I already had the replacement part but thanks to the video and during deconstruction of the door and motor I realized I didn't even need it to do the repair. However I do know how the window works which I didn't before. Thank you.
Really needed this video for my 2011 titan pro4x
I just got charged $375 to get this done, I won’t be doing that again. Awesome video, thank you!
I had to replace the unit in the passenger rear door. Somewhat different, but similar enough to this. Thanks for the helpful video. Very well done.
Great Vid!! You took your time and went step by step. Aside from helping me out, I'm positive it's going to help out a lot of other people down the road. Thank you for taking the time to make the vid, it is appreciated 👍
I want to thank you for the video,only one part was confusing when you took it out looked the the motor was attached to the bar or regulator when I took mine out I could have seen my was attached input it back in wouldn't go up looked like it was binding,I took it back out put it back in motor by itself,and it worked,
What a thorough demonstration! Good job and thank you!
Terrific video. Probably the best instructional video I've watched. Great job thank you!
This man just assumes people have a 10mm everyone knows the world just shares 1 10mm socket
Excellent explanation and tutorial. Do you have any advice for a window that’s stuck in the up position?
Do you know where can I buy the orange door panel connectors to hold the door?
You are a life saver. Thank you for such a a detailed how to vid!!!
thank you for the video, it was perfect, saved me lots of time.
just wanted to thank so much😊
Very clear and to the point............great job!
This video just saved me!! Thank you soo much!!!
Hey I'm about to buy an 06 Nissan titan with the window stuck down. Will I have issues accessing the front window bolt? Or is there a way to manually raise the window to get access?
my window its dead wont roll down so would i get it down to remove the regulator where i would need to remove the bolts/screws that holds the window to the regulator? thanks
Video helped me but didnt mention it eas attached to fram coming out but not going on and i had to take my speaker out to get to window bolt
So from watching this, it looks like the nost difficult part of this job is not losing the 10mm socket
Great video. So much help. Bless you
Worked Like a champ. Thanks for the inspiration!!!
My window sounds like theres gravel when it going up? Is that the motor?
You said you need to take the two mounting regulator bolts out however the regulator was bad and stuck in a position where you couldn't access the other bolt. You removed the second bolt off scene and didn't even show how you got it out. Not helpful
Awesome video!
Nice video thanks my friend god bless you. Your video gonna help me a lot.thanks again
If the window will go down but not respond at all when you pull the button up(doesnt click or anything on the driver main switch or the passenger switch), but does when you hit the button to go down(sometimes), that means its the motor, right? Its had issues going up and down, SUPER SLOWLY, for a long time and i think its just burnt out. Sometimes had to assist it going up. In your professional opinion, would changing out the motor(s) on it fix it? Like i said, the driver windows motor has been going out for a long time. It will roll down but wont go back up without MAJOR assistance. So i dont roll it down at all. But i can pull the switch up like im rolling the window up(with it all the way up) and the motor still clicks. Passenger window will go down with the driver switch and passenger switch most of the time, but it wont even click with either switch when you try to roll it up.
Why didnt show the change of the piece in minute 8:50 and the different part where the square piece goes into in minute 8:59? Amazing video though. I just paid 100 bucks for changing out the whole thing. Could have saved myself the hunski.
Didn’t say anything about the wiring to the light at the bottom of the door which comes on when the door is opened
You took off the regulator,but didnt put the new one back on the track or regulator
You left out the pinch prevention reset
Thank you!
not groove...slot
Excellent video......