Yakima Bed Track Kit 1 Installation
ฝัง
- เผยแพร่เมื่อ 15 เม.ย. 2019
- This simple kit easily adapts our OverHaul HD™ and OutPost HD™ truck rack systems to work seamlessly with Toyota and Nissan factory utility tracks-without sacrificing the rack’s 500-lb. on-road carry capacity or its exclusive new 300-lb. Yakima Off-Road Rating.
learn more here: www.yakima.com/bed-track-kit-1
OverHaul HD Installation Video: • Yakima OverHaul HD Tru...
OutPost HD Installation video: • Yakima OutPost HD Truc... - กีฬา
i did as instructed and took both rear screws and caps off and slid the tacoma plates in..the plate that should sit flush between the two bolts closest to the back do not..the plate wont fit between the two, immediate help would be appreciated.
Are the screws fully put back in place. I discovered that one of mine was not, and the screw socket, being a rather soft inferior metal, had shredded in the socket. It was sticking out far enough to not allow the plate to slide past it. I was able to get it out and replaced it with a screw borrowed from the front of the bed. I will need to buy some more of those screws somewhere. FYI I had to remove 3 screws to get the plates in on my 2020 six foot bed tacoma. I'm about 1/2 way through with installing this rack. I have a complaint about the adapter plates. They should have made a right and a left. Just using one means I can't spread the upright bars far enough apart to be really useful. I'm more than a little disappointed in toyota in making such an expensive truck with such a weak box that it can't just use rim rails. There is no metal cap over the truck bed! Just plastic.
I didn’t get the square washers in my kit, any idea where I can get replacement ones? Yakima says they’re sold out.
Will this system fit the 2022 Nissan Frontier with Utili-Track?