This was SO helpful! Thank you for sharing so much with us. My F1 was sitting for months because my dogs lose their minds with the beeping, but after watching this I pulled it out tonight and finally got to enjoy it!
Hey 👋 It takes about 13 minutes total, because we like doing 2 passes. But some people prefer a single pass and then do some additional scrubbing afterwards with higher power and the blue laser.
Excellent video! Thanks for that… by the way, have you ever come across when an F1 makes a weird beep while using, then the blue light goes nuts and focuses as a thick blue line???
Both...we are architects and we're interested on engraving vectors (SVG) and renders (PNG)... I'm struggling with the settings ...almost all my tryouts are burnt or almost ghosted engravings
Hmm do you mean that you want to see the outline of your design instead of the square? If so click the button with 3 dots next to the framing button and switch it to outline. Hope that helps!
Thanks for your videos...I was wondering if you could make a video for engraving on white cardboard (density paper of 300gr)... I've been trying thisweek and I didn't achieved!...so let's see if you dan help me. Thanks in advance
Thank you!!! I am a newbie and have a question: I engraved a steel pizza cutter; all went well but I washed it in the dishwasher and some letters faded...(settings: IR 100% , speed 80, 2 passes, lines 300)
I have problems with the IR after the Firmware update. WHAT I used to do in 5 to 6 minutes takes me 20 minutes now when I make a simple little 4 letter name. Anything I can do? Some help? I bought the F1 Xtool to do fairs but with that time it is not good for me. Thank you.
Hey I am sorry to hear that. Are you saying that it no longer marks any material? On any setting? If you have a Facebook I highly recommend messaging Lia Zhang, she is part of support and typically responds really quickly. facebook.com/profile.php?id=61552603568761
Happy to help! It’s a great laser and still our most used one. If you would like to support us when you make that decision we do have affiliate links in our description. But no worries we are always happy to help with any questions you may have
Do you have the correct USB cable connected to the correct USB on the F1 and the computer? You can’t connect to Wifi until you connect with the USB first. If you can’t use the USB then you need to contact XTool for help.
Just bought mine this morning, i'm so excited to have it and dive into this new world for me, glad I found this channel!♥
Welcome aboard! It’s a great laser
This was SO helpful! Thank you for sharing so much with us. My F1 was sitting for months because my dogs lose their minds with the beeping, but after watching this I pulled it out tonight and finally got to enjoy it!
Wohoo! 🥳 glad we could help!
Using mine for the first time tonight live!
I got a lot done thanks to you! Thank You!
Awesome! We are very happy to hear that!
Thank you for your videos!
You are very welcome! We're glad you like them!
You guys are the best😊!!!… Keep it coming… Really appreciate your channel and tell others about it all the time. Thanks for the PDF also!!!
Lots of great information for the new user. Thanks!
Many thanks for you video and PDF!!!
I really appreciate your videos!
Thank you so much for the support!
You all are AMAZING! Your pdf is PRICELESS! Thanks for all you do! Will you be getting the F1 ULTRA (I so hope so)
Please keep sharing ❤❤
Can you engrave in color?
I'm thinking about one of these for portable work. About how long does it take to do a tumbler such as the one shown around 2:50?
Hey 👋 It takes about 13 minutes total, because we like doing 2 passes. But some people prefer a single pass and then do some additional scrubbing afterwards with higher power and the blue laser.
Amazing thank you 😊
You are very welcome 😄
Excellent video! Thanks for that… by the way, have you ever come across when an F1 makes a weird beep while using, then the blue light goes nuts and focuses as a thick blue line???
The beeping is gone !!!! Yay thank you sooo much!
Haha you bet! Happy to help!
Both...we are architects and we're interested on engraving vectors (SVG) and renders (PNG)... I'm struggling with the settings ...almost all my tryouts are burnt or almost ghosted engravings
When framing, sometimes the square shows under the object. Do you have a solution for that?
Hmm do you mean that you want to see the outline of your design instead of the square? If so click the button with 3 dots next to the framing button and switch it to outline. Hope that helps!
Thanks for your videos...I was wondering if you could make a video for engraving on white cardboard (density paper of 300gr)... I've been trying thisweek and I didn't achieved!...so let's see if you dan help me. Thanks in advance
...sorry I'm using a XTOOL F1
Hey 👋 Do you want to engrave photos or vectors?
@@VelfCreationsI would be interested in Vectors on the F1
Thank you!!! I am a newbie and have a question: I engraved a steel pizza cutter; all went well but I washed it in the dishwasher and some letters faded...(settings: IR 100% , speed 80, 2 passes, lines 300)
I am finding using text is very cumbersome in the updated version--once it's typed in, I can't edit. I'm sure I'm missing something simple. help?
You're the best
LOVE YOUR VIDEOS
Thank you so much! Really appreciate the support!
What are the settings for Bambo lids?
We have a short with Bamboo lids, the settings are in the comments
My red dot and blue dot are not overlapping. The blue dot has a little blurr to it
Mine too
I have problems with the IR after the Firmware update. WHAT I used to do in 5 to 6 minutes takes me 20 minutes now when I make a simple little 4 letter name. Anything I can do? Some help? I bought the F1 Xtool to do fairs but with that time it is not good for me. Thank you.
Hmm it appears that some others have been experiencing the same issues. We believe xTool is currently investigating
Hope they aren’t trying to push the Ultra on people making the original F1 slower. 😮
Yeah that would be awful hopefully it is just a bug
My IR laser is no longer visible. What does that mean? I couldn’t get an answer from Xtool.
Hey I am sorry to hear that. Are you saying that it no longer marks any material? On any setting?
If you have a Facebook I highly recommend messaging Lia Zhang, she is part of support and typically responds really quickly.
facebook.com/profile.php?id=61552603568761
Planning on buying one this is a great confidnce boost
Happy to help! It’s a great laser and still our most used one. If you would like to support us when you make that decision we do have affiliate links in our description. But no worries we are always happy to help with any questions you may have
I think I need to upgrade the software 1st. My xcs does not look like yours. What version is that?
It’s version 2.0 but it is still in beta. So you may experience some issues.
Why won't my XTOOL F1 connect with USB or wi-fi???😢
Do you have the correct USB cable connected to the correct USB on the F1 and the computer? You can’t connect to Wifi until you connect with the USB first. If you can’t use the USB then you need to contact XTool for help.
Walker Larry Clark John Clark George
Young Christopher Wilson Lisa Garcia Angela