Your milk whipper Brinker head with flip a green whip a green bulb in how did the middle house building then do the protect then do the higher ones then you do do only to bring ahead and hide do you garage whip your wand have a great time I’ll be bye 0:22 0:25
I’d enjoy seeing you continue to kill the main breaker instead of the 3 emergency light breakers for that test. Seems cool when it’s all dark and just the emergency lights.
Well there is 3 bathrooms and I had bought some months ago however it's not possible for them to all be installed due to the location so if it's not possible for all of them I won't do any of them
dang you got a nice stereo system? it would be cool to see a video with the projector going as well! i was wearing the headphones and that sub was pumping!
In the Garage I'd say do the smokie by your projector. As for the house maybe one of the heat detectors in the attic or the pull station by the panel. Also, what would be pretty cool is if you had a monitor module that would put the garage panel into supervisory when the generator is running. I guess one way that would work is taking a relay with a 120-volt coil and when the 120 volts from the generator energizes the relay coil, it would close the relay, tripping the module.
Watching this one day after my 15th birthday. Still the best content as always! My suggestions for june testing: for the garage: One of the smokes in the main garage room for the house: The heat in the Garage Keep up the good work!
1:54 What are those cool RGB strips that you use? What brand/model are they and how do they work with your system? Really love the white flash startup sequence of those LEDs! 😊
I talked about that in my video of installing the one in my bedroom. I cannot install them in the house due to the aesthetics of bright green exit signs do not look good in a residential setting.
It's still the same problem of having to drill a hole into the side of the transfer switch which is difficult when it's inside the wall and it's a total pain in the ass to try and take it out if I could get some sort of really short 90° drillbit that might be my only option
Why don't you have a voice evac system? I think if you were to add it it would make it seem more like a commercial building. I've seen little modules you can add to your panel to make them work and wiring speakers w strobes. I just thought of it because my school has a voice EVAC system
In my entire life in Canada I've only seen half a dozen buildings with Voise evacuation it is not common and definitely not necessary the building is not wired for it and it is extremely expensive and unless you're using custom messages it's pointless in my opinion
Like the bulbs in the opener? They are just some 60 W equivalent 5000 K LEDs or if you were talking about the man door I have the same as the ones on the ceiling in one spot Govee M1's
@@DJboogie-eh5vs many have said that but it makes it frustrating to have to reset two systems if there is a way where it's non-latching and doesn't make any noise that would be better
you always say that EST is bad, but i see so many newly constructed buildings with EST systems so it cant be that bad, right? what makes EST systems bad, especially newer ones?
You see lots installed not necessarily because it's a good product. mostly the products that are installed in the building depends on who the contractor works with. if they have deals with certain companies and often times electrical contractors have a go to company for fire alarm that will install one product only. sometimes depending on your actual area they're only is a few options for install. cost a factor if EST is cheap to install
Anyways here is a brownie recipe 12 ounces unsalted butter (about 3 sticks; 340g) 6 ounces finely chopped dark chocolate, about 72% (about 1 cup; 170g) 16 ounces granulated sugar (about 2 1/4 cups; 450g) 2 ounces light brown sugar (about 1/4 cup, packed; 55g) 1 3/4 teaspoons (4g) Diamond Crystal kosher salt; for table salt, use about half as much by volume or the same weight 6 large eggs, straight from the fridge (about 10 1/2 ounces; 295g) 1/2 ounce vanilla extract (about 1 tablespoon; 15g) 1 teaspoon instant espresso powder, such as Medaglia d’Oro (optional) 4 1/2 ounces all-purpose flour, such as Gold Medal (about 1 cup, spooned; 125g) 4 ounces Dutch-process cocoa powder, such as Cacao Barry Extra Brute (about 1 1/3 cups, spooned; 115g)
Hey Nic just my opinion but it makes me a bit nervous with you using drone footage around your house because it kind of shows the area. No address or street but it makes it easier for bad people to try to find that if they really wanted to and you have a lot of expensive equipment.
@@nics-systems-electric And at 09:49 whenever you close the door on your Fire-Lite MS-9200UDLS, the door squeaking noise kinda sounds like a low frequency sounder due to the same frequency it makes
@@DJboogie-eh5vs devices are not terrible it's all of the added complexity that comes along with audio with amplifiers and power supplies custom buttons etc.
I Would Request To End The Supervisory Mode I Think Two Separate Fire Alarm Systems Should Both Your Garage Fire Alarm System And House Fire Alarm System Should Both Go Off At The Same Time I Liked That Idea It Would Easier So You Could Just Reset The Fire Alarm Control In Your Main House Instead Of You Going Back To The Garage To Reset The Fire Alarm Control Panel It Would Just Be Easier
Did you not watch the previous video from 7 days ago? Having the systems trigger each other would require nic to run around to reset both systems before the other is finished initializing.
Clearly haven't watched it… monthly testing videos would be over if I had to deal with that too much of a pain. no system should ever be set up that way. I've worked with them in the field it's not fun requires a person at each panel with communication with each other at all time. And resets have to be coordinated.
for june test:
garage systemtower pull station or shed heat detector (if ROR)
house system shed detector or pull station
I'll probably do something different as I just tested that same zone in this month so I'll try something else
@@nics-systems-electricat my house I pulled a BG-12 and EST Siga at the same time
Your milk whipper Brinker head with flip a green whip a green bulb in how did the middle house building then do the protect then do the higher ones then you do do only to bring ahead and hide do you garage whip your wand have a great time I’ll be bye 0:22 0:25
Next system test I think for the Garage system do the sprinkler overflow. And the house system do the pull station by the panel.
I’d enjoy seeing you continue to kill the main breaker instead of the 3 emergency light breakers for that test. Seems cool when it’s all dark and just the emergency lights.
for june testing:
activate the smoke detector in the garage by the garage door
activate the pull station by the annunciator in the house
good one i well vote for you to ✅off by nic
get this guy nic
That would have been my request, appreciate it Nic, love from the states
Great video, as always. I just have an idea/suggestion for an addition to the house fire alarm system; a strobe in the bathroom. Just a thought I had.
Well there is 3 bathrooms and I had bought some months ago however it's not possible for them to all be installed due to the location so if it's not possible for all of them I won't do any of them
Next text hit some pulls. The house pull station (main one) and one in thr garage
Great job Nick and when we come to May 4 be with you
Awesome. For your house system test in June could you do the pull station in the shed
Probably will
Hey Nick, I’m here to apologize for what he has been treating you and saying about you sorry
You’re a great man keep going😊
For June testing can you do the pull station under the deck for the house and the pull station by the bathroom for the garage?
Next test. For the garage the pull station at the top of the tower. In the house, the pull station by the panel
dang you got a nice stereo system? it would be cool to see a video with the projector going as well!
i was wearing the headphones and that sub was pumping!
Yeah I should probably do a video on this set up
@nics-systems-electric if you need some copyright free music to play then @medusakb has a lot of good music to choose from
Next system test do the pull station in the panel room for the house and the garage do the pull station in the storage room
Instead of pulling the fuse, does the detached garage have a breaker switch you can flip? Up until you put in the toggle switch...
Yes but it's in the house
Cool video as always! I really love the layout of the beginning of the video.
For the next test do the lower outside ahead for the house pull
14:52 that's the coolest done I've ever seen.
In the Garage I'd say do the smokie by your projector. As for the house maybe one of the heat detectors in the attic or the pull station by the panel.
Also, what would be pretty cool is if you had a monitor module that would put the garage panel into supervisory when the generator is running. I guess one way that would work is taking a relay with a 120-volt coil and when the 120 volts from the generator energizes the relay coil, it would close the relay, tripping the module.
Watching this one day after my 15th birthday. Still the best content as always! My suggestions for june testing:
for the garage: One of the smokes in the main garage room
for the house: The heat in the Garage
Keep up the good work!
Thank you happy birthday
@@nics-systems-electric thanks :)
1:54 What are those cool RGB strips that you use? What brand/model are they and how do they work with your system? Really love the white flash startup sequence of those LEDs! 😊
They have nothing to do with my systems but they are Govee M1 light strips and they are quite good compared to the other products I've used previously
would you try set your fire alarm systems to continuous in june?
That would require changing the settings on 11 different devices
for july or august F/A, UPS, generator testing:
house: laundry OR test pull near FACP
garage: heat detector in bathroom
Nice lights on the door 1:50
Nice video Nic! I think you should install running man exit signs to your house building that don't have them for going outside
I talked about that in my video of installing the one in my bedroom. I cannot install them in the house due to the aesthetics of bright green exit signs do not look good in a residential setting.
In all this is really awesome!
Do you have to do monthly testing at the schools too? Or is it just something you do?
Yes every system is supposed to be tested monthly
damn bro, what type of subs do you have for your stereo system
Just one 12" can't remember what model
Very nice testing video Nic!
Hey! I suggested a garage tour a long time ago (when you were Pickle 700), have you ever considered the idea or do you have plans for it?
Maybe it's but it's kinda shown in every monthly video
Very good video keep up the good work
10:03 you've never shared that Jackson is a rescue!
Double rescue
what if for a generator test switch you cut in a box next to transfer switch to put it and run wire into transfer switch? maybe a key switch
It's still the same problem of having to drill a hole into the side of the transfer switch which is difficult when it's inside the wall and it's a total pain in the ass to try and take it out if I could get some sort of really short 90° drillbit that might be my only option
Nice Nic
Do smoke/heat (i dont rememberd) in the garage in the house. And bathroom in garage
hi nick whats difference between isolator board I think its called vs a bunch of FDM-1 in a row? when do you use board instead?
FDM-1 is a dual monitor module and is the same form factor as the ISO-X
@@nics-systems-electricis there a board that can be used instead of installing say 6 FDM-1? if you need over 10 conventional
@@t8pguw8ejbwgp9e2 yes monitor modules control modules relay modules and isolator modules all come in a board version
Why don't you have a voice evac system? I think if you were to add it it would make it seem more like a commercial building. I've seen little modules you can add to your panel to make them work and wiring speakers w strobes. I just thought of it because my school has a voice EVAC system
In my entire life in Canada I've only seen half a dozen buildings with Voise evacuation it is not common and definitely not necessary the building is not wired for it and it is extremely expensive and unless you're using custom messages it's pointless in my opinion
Are the dogs friendly? Also, how often do you think you'll need to change the battery on the generator?
Ayla is friendly battery probably needs to be changed every 3 to 5 years like any other SLA battery
Nice to see a new video! Good job!
Whoa!!! "Hue G Rection?!?!?" Lmao nice video as always
Hey Nic, can you do the smoke didector from the aircondicening?
What lights do you have on the garage door
Like the bulbs in the opener? They are just some 60 W equivalent 5000 K LEDs or if you were talking about the man door I have the same as the ones on the ceiling in one spot Govee M1's
Thank you I like the chase mode on the led strips
You should set off a fire sprinkler in the Grage
What is the security light for on the panel?
Tamper switch on annunciators or any booster panels or any component of the fire alarm system that needs to be monitored if it's being opened
@@nics-systems-electric oh niceeee
@@nics-systems-electric good talk
Nice video 😊🤩😊
I was at a death metal concert in Calgary and at the front entrance I seen something that sead fire alarm sub panal
For the garage test the smoke detector for the house test the heat detector in the attic
Hi Nic, Just a question. Do the Reolink Cameras work during a power outage? I am thinking of putting them in my home.
If you have your NVR and any other switches on UPS as I do then it will keep running
@@nics-systems-electric Ok thank you
for june test:
see if your fire alarms can overpower the stereo on full whack :)
can you do the pull station in the security panel / storage room
Do you test the security system? And I subscribed to your TH-cam channel
Not very frequently
love the videos nic
I saw that TV on hockey. Are you a hockey fan? (Go Preds)
In garage push drill button on MS-92000UDLS
Drill button can't be used as a functional test
3:17 - That label though…if you know, you know.
When you do June testing start off with the generator testing❤❤❤
20:35 you should add a key switch and put it next to the first door
As I said I intend to install a switch at some point but is difficult to do with it being mounted in the wall
for June test set off duct smoke
For July test do a no power fire alarm condition that when the panel die get the generator going
The panel won't die
May 4th be with you day haha
I think you should put an annunciator in the in the shed
There would be no purpose for doing that I have a video explaining what announcers are for
No led L-series low frequency?
I showed seven of them in this video
@@nics-systems-electricwhy isn’t the LED l series horn strobe installed
@@Earth_Number_12 why would it be? Can't install something that doesn't exist yet.
@@nics-systems-electric I thought you had it already
@@Earth_Number_12 they don't even make it yet
Next month do the pull tower one
Usually I try and do a different device that would be on the same monitor module
“Monthly testing, once a month” isn’t that what monthly means? Lol
Something like that lol
for vid you should connect your security system to your fire panel in the garage
They are not connected because the security system is not used for monitoring of the fire alarm system
@@nics-systems-electric you should try it so that when the fire alarm goes off it will show up on the security panel
@@DJboogie-eh5vs many have said that but it makes it frustrating to have to reset two systems if there is a way where it's non-latching and doesn't make any noise that would be better
Are you recording on your new camera or your iPhone 14 Pro
I showed that in the video I am using both Sony a6700 for some shots and iPhone 15 Pro Max for most
@@nics-systems-electricalright thank you
Yes a new video I love this channel
Yeah!
Love you
Nic what good
Next month do a walk test maybe and cute dogs
I only set off one device per month
Walk test isn’t legal in Canada
@@nics-systems-electric dang well then a heat detector in the garage and a pull station in the house
Yes a new video
Yes may test
Bruh
I Love testing
I wish I loved my job so much that I’d elect to spend my own money and time on it at home lol
Can you do the pull station on the tower next month
I'll probably avoid that zone for next month as it's the same zone I just did
Ok
@@nics-systems-electriccan you do the one in the security panel / storage room then
How old do you need to be to watch this next month testing in the garage smoke detector and in the house pull the fire alarm
Any age my videos aren't age restricted
Ok cuz I'm 10
I want to see a security system test
I've done some before I will do one again sometime
Next test do the pull station in the house where the panel is next to the panel the metal pull station
you always say that EST is bad, but i see so many newly constructed buildings with EST systems so it cant be that bad, right? what makes EST systems bad, especially newer ones?
EST systems actually aren’t that bad, but their older systems like the QuickStart and the EST2 were really glitchy and bad
You see lots installed not necessarily because it's a good product. mostly the products that are installed in the building depends on who the contractor works with. if they have deals with certain companies and often times electrical contractors have a go to company for fire alarm that will install one product only. sometimes depending on your actual area they're only is a few options for install. cost a factor if EST is cheap to install
@@nics-systems-electric that makes sense.
Anyways here is a brownie recipe
12 ounces unsalted butter (about 3 sticks; 340g)
6 ounces finely chopped dark chocolate, about 72% (about 1 cup; 170g)
16 ounces granulated sugar (about 2 1/4 cups; 450g)
2 ounces light brown sugar (about 1/4 cup, packed; 55g)
1 3/4 teaspoons (4g) Diamond Crystal kosher salt; for table salt, use about half as much by volume or the same weight
6 large eggs, straight from the fridge (about 10 1/2 ounces; 295g)
1/2 ounce vanilla extract (about 1 tablespoon; 15g)
1 teaspoon instant espresso powder, such as Medaglia d’Oro (optional)
4 1/2 ounces all-purpose flour, such as Gold Medal (about 1 cup, spooned; 125g)
4 ounces Dutch-process cocoa powder, such as Cacao Barry Extra Brute (about 1 1/3 cups, spooned; 115g)
What about the instructions like temperature of the oven and cooking time?
@@BlinkOnWheels 375°F and about as long as it will take time will vary from oven to oven
Hey Nic just my opinion but it makes me a bit nervous with you using drone footage around your house because it kind of shows the area. No address or street but it makes it easier for bad people to try to find that if they really wanted to and you have a lot of expensive equipment.
It is what it is if they've already found my road then they can already find my house which people have
Hi
7:00 White spectralert advance
It's not a horn strobe. It's a strobe. SW.
@@spongebobzoe471 I didn't say it was a horn strobe
25:45 exhaust isnt connected
It's within proximity that is sufficient for the exhaust to be directed where they need to go
ok
1:57
hello good content im getting a call point today:]
Good for you! Hopefully it will be a return on investment
35:08 lol
do the smoky in the it in the gen room in house pull in the shed under the stars
11:37 Sounds Like a Low Frequency Sounder
Oh I thought it was a horn
It sounds like one because it is one
@@nics-systems-electric oh
@@nics-systems-electric And at 09:49 whenever you close the door on your Fire-Lite MS-9200UDLS, the door squeaking noise kinda sounds like a low frequency sounder due to the same frequency it makes
My birthday is on May 31st
Nic I tried to donate but my PayPal isn’t working so take this heart ❤
I appreciate it
5 min
👇
your pa system be like boooooooooooooooooooooooooooooooooooom
day 1 of asking for a voice demo board vid
Very expensive
@@nics-systems-electric how much
@@nics-systems-electric the panel or alarm fixtures?
@@DJboogie-eh5vs devices are not terrible it's all of the added complexity that comes along with audio with amplifiers and power supplies custom buttons etc.
I’m sorry don’t leave me. I want you here with me. I know that your love is gone.
Hello
I Would Request To End The Supervisory Mode I Think Two Separate Fire Alarm Systems Should Both Your Garage Fire Alarm System And House Fire Alarm System Should Both Go Off At The Same Time I Liked That Idea It Would Easier So You Could Just Reset The Fire Alarm Control In Your Main House Instead Of You Going Back To The Garage To Reset The Fire Alarm Control Panel It Would Just Be Easier
Did you not watch the previous video from 7 days ago? Having the systems trigger each other would require nic to run around to reset both systems before the other is finished initializing.
Clearly haven't watched it… monthly testing videos would be over if I had to deal with that too much of a pain. no system should ever be set up that way. I've worked with them in the field it's not fun requires a person at each panel with communication with each other at all time. And resets have to be coordinated.
It not may test, it summer test
Huh? This was may