That ck unit is my second favorite machine on the market. Magicwave is number 1. But that ck is a lot more reasonably priced for the home user or shop and is super smooth and delivers.
For what it's worth, thanks for getting to the point in each of your videos, instead of talking for the first 3 minutes to appease the algorithm. People that have to manipulate the algorithm really don't have good content to begin with.
I got me a tig finger 1st one last week! 35 years in the trade and don't know how I coped without one so long. Really comfort is key and you ain't comfortable when the heat is lifting your fingernails off.🤙🙂
My sons and myself were concerned that you haven't uploaded any videos in over a month what ever the reason we hope the time off was enjoyable, glad to have you back.
You are the best teacher on youtube because you are Real welder i can recognize that after 3 years of working as Welder many many times you have answered my questions in your vidios or you have shown some good solution to make the job good and fast. Thank you best regards.
Glad you made another video. Heard on the podcast you're looking at what you wanna do with TH-cam. I hope you don't stop until you have to. Hopefully all your viewers will buy from your store. I've made a few orders from your store. When I started, I bought cheap stuff on Amazon, once I started to make a little money, I bought quality items from you. Thanks Jody.
I already got my black box, right after I got the email update. I don’t really need any of it, but I like what you’re doing. And the last black box was really cool and it’s always good to have spare stuff in the shop.
I purchased your Black Box last November and your gloves are fantastic.......I really did not expect them to be any better than the other brands I have used, you have a real winner Jody...cheers, Paul
Hey up, I have a question i'll bet no one has asked you before, what camera do you use for your videos, thanks in advance and fantastic instructional videos you make.
I see that the MT-200 doesn't have pulse width. I have a DC TIG machine with pulse, but now I'm in the market for an AC/DC TIG machine and was wondering how useful adjustable pulse width is. The MT-200 says it is fixed at 50 percent and I can see that would be one less setting to worry about with it fixed.
I noticed you using the larger cups with carbon steel, and I was wondering if that's needed, I definitely seen the do better with aluminum and struggle more with carbon steel as funny as that sounds
Hi. I want to ask you what is differences between pulse welding and DCEN. When you set on the pulse, is current and polarity changed to another? ex) DCEN to DCEP or AC something like that?
Pulse mode doesn't get to zero current, it switches from high to low(background) current level continuously(not zero current). The polarity should remain the same. DCEN remains the same DCEN In this video, 1.21min -background (low)current was set at 30% of high current value(not zero). High current was set to 140A(higher than straight welding value)
What are differences between welding with ER70S-2 and ER70S-6, fully penetrating on a butt joint and which filler would be preferred for that application? I know ER70S-2 has a cult like following in the US, but in Europe and Asia it is sort of considered outdated and something similar to ER70S-6 is now used for previously ER70S-2 applications.
Wish I had a pulse option! Have wondered whether I could make up a circuit for my foot pedal to switch pulsing - not sure yet whether this could work. Nice demo Jody :) Great selection in the Black Box.
It's rather obvious you're very seasoned as a welder.I appreciate your thoroughness with your explanations. I am just starting out and I came to the conclusion with sheet metal and some of the thinner gauges pulse welding would be a must as you mentioned it keeps the heat out of the metal.
If you do not have a Tig Finger, get one or both. They work great. Mine have helped me tremendously. It makes it easy to prop and drag, which allows me to be more consistent in my movement and steadies my torch hand. They are well worth the money.
Hello Jodi, when you were showing the tig finger, you were walking the cup with a number 8 narrowed cup. What's the reason for this vs the Furich 12? Thanks
I received my Black Box yesterday and I have a question about the Furick Cups box (starting at 3:18). The box says "Not Recommended for AC," but you are using the Fupa 12 with AC and AC pulse in this video. Why are they not recommended for AC and why are you using them with AC if the manufacturer says that? I am currently using a Titanium Unlimited 200 from Harbor Freight, so I'm DC only for TIG. I watch videos like this for the techniques and insights. I will need to rewatch once I get a TIG welder with AC pulse capabilities. Thanks for the great video!
Great video as usual thanks Jodi 👍. Also good to see the differences. A lot of the high end off road race truck builders I follow have welds I come no where near, but not only do I not have pulse, I don’t even have a peddle or amp control during welding. So at least it’s not all me (just mostly lol)
I can watch your videos all day. Hey I've got a pulse MIG everlast welder but have never used pulse for MIG. Any videos you can make using that process would be great. Please keep your wonderful videos coming.
Hi Jody I was wondering about purging and purging a stainless steel barrel, I don’t want destroy it but want to weld a stainless ferrule to the top which will be offset. Question is if I fill the barrel nearly to the top with water but leave a gap of two to three inches then fill it with argon would that work?
looking to get my first TIG welder. so I have been watching all your videos. This may be a dumb question... but can you TIG overhead like I do with stick and MIG? I never see anyone talking about it.
I am very interested in the tig finger as well as the box kit Jodi. Do you have an outlet in Australia? If not then I have to pay shipping from USA for one item and that becomes costly. Thanks. John, Australia.
I put in for one of the C.K feeder rings that they were giving away,I got an e-mail saying they were out of stock,and it would be a couple weeks,never heard anything more after that!
Low frequency pulse didn't really work for me, what's works great for me is few 100Hz to kHz pulses, low background with very high current spike, like 90%/10%, 70A/320A, with foot pedal for 1.5-2mm steel, short high amperage spike is like stirring the weld puddle, likely by electromagnetic force, so the filler sticks/bonds much better to base metal.
Hello I was wondering if there's possible to buy and M furick cups to EU standard dimensions as we use metric and not inch and I don't wanna pay $400 for something that dont fit my tig torch.
Hola buen día señor yo admiro su trabajo de soldadura Tig yo soy soldador de arco manual 6g soy de chile como puedo hacer para obtener este producto que usted muestra lo quiero quedo atento a su comentario
I have a project and could do with a little help. It's a galvanized steel frame which has additional steel pieces added on. I'm using argon gas, proweld ceramic 8 cup and stainless wire. But the amount of times I'm having to re sharpen my tungsten due to the weld continuously "popping" is a nightmare. Any advice?
Awesome video jodi..... Is it possible for you to do some sheetmetal thin gauge 22-18, and give up settings for pulse and non-pulse..... Basically for replacing body panels and stuff.... Thanks for all you do.... I light up when I see a WELDINGTIPSANDTRICKS video pop up!!!!
Black box looks cool, would be great if you can get it without the Furick cups though, they don't fit my tig torch (CK worldwide style torches are not, well, worldwide)
Today i was working on this pulse settings I don’t know if the pulse settings make the weld weaker or it’s the same quality as the normal tig weld cuz it’s so easier than the normal tap welding for me snd im still a noob im welding tig for 3 weeks only
Hey Jodi, been watching you for a while! I'm looking at buying an eastwood tig 200 ac/dc machine. Other than hearing their customer service is really good I haven't heard much else about them. The machine is just over 1,000 and was wondering if you have used eastwood before or know someone who has and had good or bad experiences. If you strongly advise against buying an eastwood what are some other good tig welders that run ac/dc
Exelente video..entiendo k ase pork en la soldadura aki en mexico los terminos son en ingles....y eso me motiva para tratar de aprender ese idioma....y ser mejor en el ramo......grasias por compartir conocimiento
Hey, Gregory. Our Black Box deals are limited time deals. Head over to weldmonger.com and scroll to the bottom to subscribe to the newsletter. You'll be notified there when we release a new Black Box (I'll bet we'll be doing one Black Friday). You can also find the CK welder I used in the video on the site.
Hey Jodi - good to see you on here! Been a while! Hey quick question if you would - what do you think of Sil-Bro for doing sanitary fittings? They won't have much stress on them, but might it be easier than full TIG?
Still never recieved my ez dabber. They sent me an email at the end of august saying all orders would be filled in 3 to 4 weeks. 8 weeks later nothing.🙁
@@kevinblackwellwelder hope so, been putting off finish welding a 200 gallon fuel tank I'm building out of 12 gage stainless. Got about 25-30 feet of dabbin to do on it.
I think the whole welding industry based on Tig welding has to consider the newest technique taking the industry by storm and that is the "cold welding" method, which isn't really cold but is a form of tig stitch welding but with more grunt and precision. For die hard tig operators the process will bring a derisive exclamation to their lips as they can only relate to what they know from the past practice and learned experience......to them anything new is taboo as it erodes their high status and brings the process of metal bonding down to a simple and practical level that pure tig cannot ever do.
That ck unit is my second favorite machine on the market. Magicwave is number 1. But that ck is a lot more reasonably priced for the home user or shop and is super smooth and delivers.
For what it's worth, thanks for getting to the point in each of your videos, instead of talking for the first 3 minutes to appease the algorithm. People that have to manipulate the algorithm really don't have good content to begin with.
I got me a tig finger 1st one last week! 35 years in the trade and don't know how I coped without one so long. Really comfort is key and you ain't comfortable when the heat is lifting your fingernails off.🤙🙂
My sons and myself were concerned that you haven't uploaded any videos in over a month what ever the reason we hope the time off was enjoyable, glad to have you back.
all good over here. working hard on other stuff for a while
@@weldingtipsandtricks could you do a x-ray and bends test on pulse vs non
You are the best teacher on youtube because you are Real welder i can recognize that after 3 years of working as Welder many many times you have answered my questions in your vidios or you have shown some good solution to make the job good and fast. Thank you best regards.
Hi Jodi, haven’t seen much of you for a while. Nice to see you again. Awesome video.
Hey, thanks!
Hard workin men have to stick together. I got ya brother.
Glad you made another video. Heard on the podcast you're looking at what you wanna do with TH-cam. I hope you don't stop until you have to. Hopefully all your viewers will buy from your store. I've made a few orders from your store. When I started, I bought cheap stuff on Amazon, once I started to make a little money, I bought quality items from you. Thanks Jody.
thanks, I am posting a bit less on youtube while I work on other stuff and figure this thing out.
I already got my black box, right after I got the email update. I don’t really need any of it, but I like what you’re doing. And the last black box was really cool and it’s always good to have spare stuff in the shop.
thanks very much
I love pulse for bronze work. Sil Bronze can be kinda goey and the pulse does a great job agitating the puddle to keep stuff moving.
Thanks Jody!
I purchased your Black Box last November and your gloves are fantastic.......I really did not expect them to be any better than the other brands I have used, you have a real winner Jody...cheers, Paul
I don't even own a welder and I'm still tempted to buy your Black Box Special. :-)
Buy a good one, you will need it , MIG..
@@keithsage1593 It only makes sense if he gas a work shop otherwise its not affordable...
That’s prolly why you’re poor.
Bwahahaha me too
Haven’t watched you for a few years but still the absolute best welding videos. You probably should have been a director.
Hey up, I have a question i'll bet no one has asked you before, what camera do you use for your videos, thanks in advance and fantastic instructional videos you make.
I see that the MT-200 doesn't have pulse width. I have a DC TIG machine with pulse, but now I'm in the market for an AC/DC TIG machine and was wondering how useful adjustable pulse width is. The MT-200 says it is fixed at 50 percent and I can see that would be one less setting to worry about with it fixed.
I noticed you using the larger cups with carbon steel, and I was wondering if that's needed, I definitely seen the do better with aluminum and struggle more with carbon steel as funny as that sounds
Hi. I want to ask you what is differences between pulse welding and DCEN.
When you set on the pulse, is current and polarity changed to another? ex) DCEN to DCEP or AC something like that?
Pulse mode doesn't get to zero current, it switches from high to low(background) current level continuously(not zero current). The polarity should remain the same. DCEN remains the same DCEN
In this video, 1.21min -background (low)current was set at 30% of high current value(not zero). High current was set to 140A(higher than straight welding value)
So much information in one video! So glad I found your channel
What are differences between welding with ER70S-2 and ER70S-6, fully penetrating on a butt joint and which filler would be preferred for that application? I know ER70S-2 has a cult like following in the US, but in Europe and Asia it is sort of considered outdated and something similar to ER70S-6 is now used for previously ER70S-2 applications.
Wish I had a pulse option! Have wondered whether I could make up a circuit for my foot pedal to switch pulsing - not sure yet whether this could work. Nice demo Jody :) Great selection in the Black Box.
It's rather obvious you're very seasoned as a welder.I appreciate your thoroughness with your explanations. I am just starting out and I came to the conclusion with sheet metal and some of the thinner gauges pulse welding would be a must as you mentioned it keeps the heat out of the metal.
Are you welding stainless steel or mild steel in this video?
hi, enjoying the videos. learning a lot. how is the best way to cut a down tungsten electrode
If you do not have a Tig Finger, get one or both. They work great. Mine have helped me tremendously. It makes it easy to prop and drag, which allows me to be more consistent in my movement and steadies my torch hand. They are well worth the money.
Hello Jodi, when you were showing the tig finger, you were walking the cup with a number 8 narrowed cup. What's the reason for this vs the Furich 12? Thanks
New equipment in the hands of an old welder is the best of both worlds.
Hello, the steel which is welded is 3 mm width or more?
I received my Black Box yesterday and I have a question about the Furick Cups box (starting at 3:18). The box says "Not Recommended for AC," but you are using the Fupa 12 with AC and AC pulse in this video. Why are they not recommended for AC and why are you using them with AC if the manufacturer says that?
I am currently using a Titanium Unlimited 200 from Harbor Freight, so I'm DC only for TIG. I watch videos like this for the techniques and insights. I will need to rewatch once I get a TIG welder with AC pulse capabilities.
Thanks for the great video!
What helmet welding do u recommend when welding pulse Tig?
my question is on the transformer tig welders , theirs a dial setting reading pulse frequency , is that pulse .
THIS GUY NEVER CEASES TO AMAZE ME - GREAT STUFF AS USUAL
A lot of topics but well covered. Really enjoyed!
Jodi as always excellent video loved the first weld made much smoother finish thanks for all your videos.👍👍👍
Thank you very much!
Can the pulse feature give the same result as a "cold welder"?
Great video as usual thanks Jodi 👍. Also good to see the differences. A lot of the high end off road race truck builders I follow have welds I come no where near, but not only do I not have pulse, I don’t even have a peddle or amp control during welding. So at least it’s not all me (just mostly lol)
Hey Jodi i’m after some information on the use of clear cups what are they used for and what’s the advantage of them cheers thanks
I can watch your videos all day. Hey I've got a pulse MIG everlast welder but have never used pulse for MIG. Any videos you can make using that process would be great. Please keep your wonderful videos coming.
Hi Jody I was wondering about purging and purging a stainless steel barrel, I don’t want destroy it but want to weld a stainless ferrule to the top which will be offset. Question is if I fill the barrel nearly to the top with water but leave a gap of two to three inches then fill it with argon would that work?
hey man!just wanna say im a big fan,however in in a part of the world where your kits dont do postage,any workaround around that?
Glad to see you back stay safe👨🏻🏭🇬🇧
What is the model of welding machine?
Beautiful corner.
looking to get my first TIG welder. so I have been watching all your videos. This may be a dumb question... but can you TIG overhead like I do with stick and MIG? I never see anyone talking about it.
Yes it's just more difficult because of the position.
I am very interested in the tig finger as well as the box kit Jodi. Do you have an outlet in Australia? If not then I have to pay shipping from USA for one item and that becomes costly. Thanks.
John, Australia.
Those knobs look real pretty
I put in for one of the C.K feeder rings that they were giving away,I got an e-mail saying they were out of stock,and it would be a couple weeks,never heard anything more after that!
Low frequency pulse didn't really work for me, what's works great for me is few 100Hz to kHz pulses, low background with very high current spike, like 90%/10%, 70A/320A, with foot pedal for 1.5-2mm steel, short high amperage spike is like stirring the weld puddle, likely by electromagnetic force, so the filler sticks/bonds much better to base metal.
How much is the black box special and where can a person get ot at ? Thanks
Thank you for the great shots. I have learned a ton from watching your videos
This is my work ....TIG IS FANTASTIC and this video Is a good example......try with cupper or alluminium.....
Hi how do I contact you about making a purchase
All I can say is AWSOME work and glad to see a new vid. The tig finger is a life saver I love them go get one and you will thank yourself.
Nothing on the website about a black box special or I would order one.
what set up would you recommend for welding 5/16" and 1/4 round stock parts? I make and bend my products using 304 stainless all round stock fit ups.
Hello I was wondering if there's possible to buy and M furick cups to EU standard dimensions as we use metric and not inch and I don't wanna pay $400 for something that dont fit my tig torch.
Those are some sweet arc shots!
Nice video, is it possible to use tig welding for cupper pipes( refrigeration)?
Hola buen día señor yo admiro su trabajo de soldadura Tig yo soy soldador de arco manual 6g soy de chile como puedo hacer para obtener este producto que usted muestra lo quiero quedo atento a su comentario
Love all your videos
I’m just learning to tig
Finding it quite difficult
Love the black box
Can I get it in uk ?
Keep up the good work
I wish you would ship worldwide. I managed to get a tig finger locally but sadly its just not big enough for me.
I have a project and could do with a little help. It's a galvanized steel frame which has additional steel pieces added on. I'm using argon gas, proweld ceramic 8 cup and stainless wire. But the amount of times I'm having to re sharpen my tungsten due to the weld continuously "popping" is a nightmare. Any advice?
the only popping I've encountered was fixed by turning the argon up and or shortening the stickout.
Grind off the galv before you weld it...
Awesome video jodi..... Is it possible for you to do some sheetmetal thin gauge 22-18, and give up settings for pulse and non-pulse..... Basically for replacing body panels and stuff.... Thanks for all you do.... I light up when I see a WELDINGTIPSANDTRICKS video pop up!!!!
Is there a way to upgrade a Lincoln Precision tig 275 to get the adjustable AC frequency ?
Black box looks cool, would be great if you can get it without the Furick cups though, they don't fit my tig torch (CK worldwide style torches are not, well, worldwide)
Today i was working on this pulse settings I don’t know if the pulse settings make the weld weaker or it’s the same quality as the normal tig weld cuz it’s so easier than the normal tap welding for me snd im still a noob im welding tig for 3 weeks only
I think I have been tig welding with too little power I end up taking forever and making a mess. 105 Amps in 11 gauge
hello jody excellent welding and video. Can cast iron tig weld with Ni99? thank you greetings from Argentina✋✋✋
I like the Magnets and the C Clamps ! 😉👍
Good to see real welders on you tube
Great video, thanks! The TIG finger & XL are on my Christmas list!
I have a 17 torch. Would like to try a gas lens , can I keep the torch long?
Hola cuanto vale ese kit y como puedo comprarlo soy de españa un saludo gracias
I love my Furick # 12 cup, gonna use it today..."NEW SCHOOL BEATS OLD SCHOOL" thanks Jody!
what do you think about newest digital kemppi tigs?
Hey Jodi, been watching you for a while! I'm looking at buying an eastwood tig 200 ac/dc machine. Other than hearing their customer service is really good I haven't heard much else about them. The machine is just over 1,000 and was wondering if you have used eastwood before or know someone who has and had good or bad experiences. If you strongly advise against buying an eastwood what are some other good tig welders that run ac/dc
For the money, I think Everlast welders are the best you will get. I also have an AHP Alphatig that is very good for $800ish.
Exelente video..entiendo k ase pork en la soldadura aki en mexico los terminos son en ingles....y eso me motiva para tratar de aprender ese idioma....y ser mejor en el ramo......grasias por compartir conocimiento
So, how do I get one of the boxes?
Hey, Gregory. Our Black Box deals are limited time deals. Head over to weldmonger.com and scroll to the bottom to subscribe to the newsletter. You'll be notified there when we release a new Black Box (I'll bet we'll be doing one Black Friday). You can also find the CK welder I used in the video on the site.
How could I get the black box deal in uk ?
I might get a pulser for my Syncrowave 350. Mainly I need a new tank of gas. They're proud of their gas.
Hey Jody, nice to see you
A good kit
Order placed! Thank you for sharing your knowledge!
Hey Jodi - good to see you on here! Been a while!
Hey quick question if you would - what do you think of Sil-Bro for doing sanitary fittings? They won't have much stress on them, but might it be easier than full TIG?
Happy Halloween everyone 🎃 thanks for the video Jody 👊🏻
I can't see with the pulse on. It's like my pupils are trying to open and close?
Really?
How are you.
Like the black box!!👍👍👍 thank for the video. Nice shot in the arm for some motivation.
Still never recieved my ez dabber. They sent me an email at the end of august saying all orders would be filled in 3 to 4 weeks. 8 weeks later nothing.🙁
I got mine yesterday, it should be soon.
@@kevinblackwellwelder hope so, been putting off finish welding a 200 gallon fuel tank I'm building out of 12 gage stainless. Got about 25-30 feet of dabbin to do on it.
Thinks you are da bist master
Your welding is very good
Damn those ss pipe welds are beautiful
I think the whole welding industry based on Tig welding has to consider the newest technique taking the industry by storm and that is the "cold welding" method, which isn't really cold but is a form of tig stitch welding but with more grunt and precision.
For die hard tig operators the process will bring a derisive exclamation to their lips as they can only relate to what they know from the past practice and learned experience......to them anything new is taboo as it erodes their high status and brings the process of metal bonding down to a simple and practical level that pure tig cannot ever do.
From germany best wishes to the best welder with the best content...
Man, your are the welderking🥇🤗
Any more black box deals coming?
We ran out of this one but we’re going to bring it back once we get parts back in stock. Also different versions coming soon. Thanks
Good job sir. My prom indonesia🇮🇩🤝
I am 72 I am a retired pipe fitter I sure wish that had been around when I was welding
Somebody explained to him what fupa means. I agree with you Jody, the name does not lend itself toward advertising.
Black box is rad though. Purge box is a nice touch
What is the welder brand? Pls
CK Worldwide MT200
You got style and quality in your weld ..It's hard to get hired with this trade when the company's don't want to pay us what we are worth..
An excellent video as always from you, manny thanks 😊
I've learned a lot from you
ชุดเท่าไรครับ
Expert skill and knowledge 👌
Always great content.