Great tool! It seems like the springiness in the tool actually amplifies the "click", making it easier to see for viewers, and I can better visualize the amount of force you are applying to the pick compared to other videos. You might want to lock the white balance on the camera tho, colors changing wildly during pin inspection.
I think different springs shouldn't be a problem. Differing spring tension just helps resist raking/bumping. Unless you have a really really long driver pin and it requires a shorter spring so it doesn't get mangled in use.
I can’t be the only one of us loyal fans that wonders how in the absolute hell he ever gets those back together 😂 that’s gotta be even more impressive than watching him pick open even the most complex lock in under 5 mins!
LPL is a very meticulous picker and it is probably easier than it would seem to us mere mortals. Now, if he was to drop his tray, and didn't have a video to refer back to, that would be a challenge even for LPL !
@@walmartdog1142 Not really. You place the key pins in the plug and insert the key. If the pins aren't correct, you can tell. For the driver pins in the bible, it does require that you know where they go. But that's only the case when the driver pins aren't all the same (usually, they are).
For someone who knows nothing about lock picking and just watches these videos for the cool factor, seeing a tool like that was really nice because I felt like I was being taught how to pick rather than just shown how someone else does it.
Because of you and your channel I’ve purchased a locking pick set from banggood! It should arrive early next week! So glad your videos ended up in my recommendations!
Wow, that really made short work of a pretty tough lock. Makes sense that the distributor for it is in New York. High security locks like Mul-T-Locks and Medecos seem to be more common in NYC based on the number of locksmith shops I have seen advertising them in their windows. Presumably there is probably a demand among locksmiths to be able to pick such locks as well.
Considering we're getting more and more means to break these systems, i think it's a good decision that i have essentially turned my lock into a safe combination door. Mul-T-lock + geared rotor and a combination mechanism. Rotate left and right until the combinations are set and then open the doors. Feeling better about my paranoia.
All I can say is I'm glad I haven't come across one of those locks yet.. The right tool in the right hands and you make it look so easy, nice one my friend ;-)
As much as the key-shaped tensioner limits the pick's use depending on what attachments you have, it definitely looks like it'd solve all but the worst shaky-hand issues by keeping the pick centered. If I worked as a locksmith instead of picking as a hobby, I'd probably love such a specific tool. I treat locks like puzzles though, and a tool that's too good can make it harder to have fun.
I really want to see a collaboration between LockPickingLawyer and Steve1989MREInfo. The tone of the voice, way of presentation, signature phrases really hit the same vibe for me. "Alright, let's get this out onto a pinning tray. Darn nice!"
I love how locksport has become a bit of an arms race. Lock companies started making locks that make standard picking nearly impossible, so lockpickers started making specialty picks to defeat them. It's the lock companies' turn to escalate the situation again.
Well, that pick design deserves my bow-in-the-presence-of-the-royalty-or-heir. And CNC of that was quite 4-coordinate, at least. I _really adore_ of the author of that picking tool - even I'm not ever interested in picking locks IRL - but engineering was HATS OFF! My respects and abdication being somewhat of metalwork designing engineer.
Vladimir Looks like lathe, then regular router milling, with knurling before or after milling. The milling stage includes a threading step for set screws. The blades look like stamped or milled sheet stock.
@@anononomous That reminds me of the classic 1960s song, rolling in the wind. I love the lyrics. /How far can an anti-drilling ball bearing in a lock roll after the LockPickingLaywer guts the lock?/How far across the shop floor in the basement where locks go to die will it get? Will a strong gust of wind pick it up and blow it away? The answer my friend is blowing in the wind that is pushing the ball bearing along/
xBlueTornadox Well these are from a strong company, and I don't think this is advertised as their best model (they probably have a 6 pin version and almost certainly an electronically enhanced version).
Your intro is perfect btw. The way you hit the same notes with the same words is as good as it gets. Did a professional tell you to do it that way or is it more natural talent?
It probably comes with his profession. When your job is to persuade people, speaking clearly, unambiguously and with a cadence that makes what you say stick in the minds of listeners is probably really helpful.
@@wonderofu8073 OK, here's one. th-cam.com/video/gsxnn9XTbfc/w-d-xo.html Better check this channel they have some more tools. Seems it's a French company that makes dimple picks and decoders.
@@wonderofu8073 Here's another strange one. Seems to be for car locks. The channel has more than one video on this. th-cam.com/video/hJaJRXpwIvs/w-d-xo.html
I swear you sound exactly like my dentist when you are doing your lock picking thing. Except the only thing he is good at picking is the money out of my wallet.
That color shift at 4:44 really freaked me out! I was watching LPL on a new TV for the first time. I had to open the video on my phone to make sure it was the video and not my screen.
A job well done and fully explained. May i ask is this for sale to the General public, in your country, and in England. Also the current cost. All your vids are exceptional well done, bill.
I am the head locksmith at Columbia University all we use is Mul-T-Lock interactive. This pick is made useless it would seem by the addition of side pins and/or back pins to the plug. I have every intention on getting this pick to try it out. In an institution picks are basically obsolete and everything is masterkeyed with no reason to pick for lockouts.
To be fair, he said the picker he gave the tool to not only had never tackled a mul-t-lok, but had also never attempted a dimple core either. This man had zero experience with the base version OR the upgraded version and picked it in only 15 mins, first try. That honestly IS impressive.
i'm still flummoxed as to how you pick the outer pin first and then the inner pin. with a handheld pick, i would imagine lateral variation, but with this one, locked into the keyway like it is, it seems like all you have is depth and rotational variation. the rotation variation with this kind of pick could allow you to select lateral position of the tip of the pick, but it seems like it'd sweep up the inner pin (or at least risk it. anyway, nice picking. i will add that i think your prior grey metal tray was easier to focus on than this one (probably due to shininess/reflections) - your more recent videos seem to be slightly off on focus when you zoom into a closeup of the pins. when you have something up close but in your fingers, the focus is great. thanks!
Is there a video where you describe your terms? Click, binding tightly, false set, etc. I'd love to know exactly what they mean and see what's happening when each occurs. Thanks!
You say the "Rotapik" made short work of the lock, when in fact it was _you_ who made short work of the lock. There's an old saying LPL... "You can have all the tools but you've got to have the know-how." That's it right there Boom!💥💨😲💨😀
would like to see the keyway more clearly. I have a dimple lock with a rectangle keyway and no warding. When you try to wrench it rests against the first pin. Soon as you set that pin the tension wrench is loose. So I am watching carefully for dimple and keyway on them.
That is a good showing of how good LPL is. 15 minutes is a long time to be picking a lock. I am sure that was not under pressure as if trying to get into a home where the owner is paying you to open the lock because he dropped his keys while out.
It did, multiple times. Results from the use of auto white balance. Would be better to do the white balance once and then keep it. I think there is no change in lighting because it's indoors, so this should be fine.
Sadly when I had my stroke a real life white balance shift did not occur... Would've been much cooler than just the standard fare of garbled speech and droopy face imho. I'm about to take up this sport to help me with coordination among other skills.. So fingers crossed I can ever be as good as lpl or bb...
Naly you don’t even need to know which you are on. The pick wire tip is shaped in such a way that it pushed both at the same time but can also reach inside the outer pin to get the inner when it’s time.
I own a lot of mul-t-locks and while it’s probably more than overkill for my home and padlocks for general use, one can’t help but be disappointed by its security after seeing how fast LPL can pick it.
I really love the idea of the people selling you locks also selling the means to disable the lock, do they furnish the addresses and lock types as well? Picking devices are highly Illegal here in Australia.
Small movements of the pick with very precise placement. Essentially he centers the pick on the pin to hit the inner pin, rests it on the edge of the pin to hit the outer pin.
@@roysammons2445 You'll notice when he's doing the outer pins, he's not on the markings, but offset a bit. He's right on the markings when doing the inner pins.
It was interesting seeing your lockpicking with the tool since it very clearly shows your movements (both the depth of your pick, and how you rotate it)
There’s levels to this. There’s a guy on another lock picking channel that literally complained for 7 mins that this tool didn’t work on this lock. LPL did it in literally one min AND described pro n cons of the tool. There’s levels to this fellas be humble
Would I be right in saying the Lockwood MT5+ profile the VPIL uses (843 - Oakleigh factory exclusive) is one of the instances where you'd need that additional key guide? 🤔
I just got my first lock pick set yesterday because of your channel and I was wondering are you using the pick as a lever to lift the pins up, or are you rotating the pick to lift the pins up?
LTL. I do not know why I find your videos so captivating. Maybe I just enjoy learning stuff and you are really great at your tutorials. Your breakdowns. Your comedy. Please keep these videos coming I will watch every fucking video because I enjoy it no stupid intro no please subscribe hit the like button blah blah blah just Bare Bones content and it's good thank you
Unfortunately a good, solid kick is all it takes to open most residential doors. And if that doesn't work then a hammer will easily open most windows. Either way, common burglars don't pick locks.
So frustrated with my E11, been trying for 12+ years to pick it, never set one pin. I jte to think how many hours, all different picks, Multipicks, Goso, homebrew, nothing changes the dead response. Everything springy, apart from maybe pin 1 occassionally disappearing beyond the keyway ceiling, but there’s zero give in the core, as with other Mul T lock interactive euros or ovals. I’ve picked an E14 and a C8, both held out for a long time, but one day, 5 binder, with successive clicks and core give, then clunk, deep falsey and tickle of one or two inner pins and open. Any ideas before i dissolve it in acid, would be welcome.😭😭😭😭🤷♂️😆♥️♥️♥️
How does this tool move inner and outer pins separately? It looks like the tool is turned anticlockwise for the outer pins and clockwise for the inners, but if that's the case I'm very surprised it wasn't mentioned. In a similar line, since there's only one loose spring in the bible behind each pair of concentric driver pins, is there a second spring acting between each of the outer and inner driver pins to preload both inner and outer pins against the key?
Hey this question doesn't have to do with this video. I have recently had your channel show up on my feed and your knowledge has inspired me to get a basic kit and some practice locks. So i picked up three sparrows practice locks, a standard pin, spool pin, and serrated pins practice locks. Ok so the question i have is when im picking the spool practice im not getting any counterotation from the pins, it to the point where i have takin all the tension off core and still nothing. Why do you think this is happening.
@@geolocksmithbk I thought so, I would love to see LPL give the MT5+ a shot. I think they are much harder than the Interactive, but I am curious to see how much harder for a hard core picker.
I've a couple of questions. On the driver pins, are the inner pins "captured" in the outer pin? I didn't see any of them separate. Also only seeing one set of springs, I don't see how it can tension both inner and outer pin if they are different height cuts?
Question for the LPL, is it safe to leave the key (rotated) in the lock on the inside of the frontdoor? (lock is a Litto/ASSA ABLOY, Euro profile cylinder type). this way it's not possible to insert a key from the outside (lock bumping). But would it also help against picking or raking? (key is on a keychain and therefore not possible to push out and slide back on a paper sheet under the door).
![[702] The Naughty Bucket Chronicles - Mauer NW5 Euro Profile Cylinder Picked and Gutted](http://i.ytimg.com/vi/uGU0tFiJsbs/mqdefault.jpg)
![[702] The Naughty Bucket Chronicles — Mauer NW5 Euro Profile Cylinder Picked and Gutted](/img/tr.png)
![[154] MUL-T-LOCK INTERACTIVE 252 | OBIJANJE | DADA PICK - WENDT (eng sub)](http://i.ytimg.com/vi/-_eREtiR3PY/mqdefault.jpg)
![[867] Unusual Mul-T-Lock Motorcycle Disc Brake Lock Picked and Gutted](/img/n.gif)
My favorite part is the specialty tools the craftsmanship and everything is something great to look at.
LPL now adding a sonic screwdriver to the arsenal
I bet he's wearing a giant scarf and we just can't see it
Probably a fez too!
That, sir, was quite intricate sarcasm. Thank you!
LOL
Does that mean Bosnian bill is the master?
That light temperature shift at 4:38 was huge!
I was on my new TV, had to pause the video and watch for it on my phone!
I wonder if it's the WB of the camera or the temperature of the light that changed.
Well, considering it's Summer for me, I can't say I mind things cooling off every now and then.
I thought it was my phone for a sec there.
I had the thought "I don't remember dropping acid today" and had to back up to clear my head.
Great tool! It seems like the springiness in the tool actually amplifies the "click", making it easier to see for viewers, and I can better visualize the amount of force you are applying to the pick compared to other videos. You might want to lock the white balance on the camera tho, colors changing wildly during pin inspection.
The sudden red filter made my eyes dizzy.
15 minutes for a random person, 15 seconds for LPL. Haha.
He didn't win that championship for nothing.
15 seconds with no rush and while explaining the feedback he's getting every time. Wonder what he can do rushing it, no talking.
More like 15 hours!
Thanks to this channel i now have a successful used bike resale business
nice. have you found a good lawyer yet ?
"Do Not Duplicate." I couldn't if I tried.
U’r not alone bro
Beat me to it
I sang that...
It's not meant for you! You can take it at a key maker to duplicate it! That's what it meant.
I have a key decoder if anyone is interested
Any lock that requires a specially made machined tool to open, because standard picks and tensioners won't work is a great lock in my book.
Well, a normal tubular pick is still allowed.
@@namibjDerEchte it would be a dimple pock not a tubular pick
Doesn’t really require special tools they just make it easier
Some day I'd like to see "The springs should all be the same" *drops 5 different springs* "Shit"
I think different springs shouldn't be a problem. Differing spring tension just helps resist raking/bumping. Unless you have a really really long driver pin and it requires a shorter spring so it doesn't get mangled in use.
Well it happened I forget which one. It was recent and I think maybe an Abus? Not sure
I can’t be the only one of us loyal fans that wonders how in the absolute hell he ever gets those back together 😂 that’s gotta be even more impressive than watching him pick open even the most complex lock in under 5 mins!
He replays the video he recorded.
It's not that hard.
LPL is a very meticulous picker and it is probably easier than it would seem to us mere mortals. Now, if he was to drop his tray, and didn't have a video to refer back to, that would be a challenge even for LPL !
@@walmartdog1142 Not really. You place the key pins in the plug and insert the key. If the pins aren't correct, you can tell. For the driver pins in the bible, it does require that you know where they go. But that's only the case when the driver pins aren't all the same (usually, they are).
@@jimstand You mean he plays it backwards? :)
I really liked how clearly I could hear every move and click while picking.
For someone who knows nothing about lock picking and just watches these videos for the cool factor, seeing a tool like that was really nice because I felt like I was being taught how to pick rather than just shown how someone else does it.
Agreed! For the first time I could actually SEE the difference (in depth) from 1 vs 2 etc
This tool is made by Vetal R. He is a very good toolmaker, especially for dimple/pin-in-pin locks.
Hi there, do you have a buy link?
I love this pick. It lets us really see how LPL manipulates the pick. Seeing the dot move back and forth is so awesome.
Finally a LPL video that is longer than a BosnianBill video on the same day!
Because of you and your channel I’ve purchased a locking pick set from banggood! It should arrive early next week! So glad your videos ended up in my recommendations!
I think it would have been a good comparison to see how long it would have taken you to pick it using normal methods vs the rotor pick.
My money is on it taking longer with the tool, lol
So that's why he didn't do it.
@@tomasgoes ehh that would be a reason TO do it actually
Wow, that really made short work of a pretty tough lock. Makes sense that the distributor for it is in New York. High security locks like Mul-T-Locks and Medecos seem to be more common in NYC based on the number of locksmith shops I have seen advertising them in their windows. Presumably there is probably a demand among locksmiths to be able to pick such locks as well.
Considering we're getting more and more means to break these systems, i think it's a good decision that i have essentially turned my lock into a safe combination door.
Mul-T-lock + geared rotor and a combination mechanism. Rotate left and right until the combinations are set and then open the doors.
Feeling better about my paranoia.
What an impressive tool. The design's that have been coming out for lockpicking tools are all pretty impressive lately.
All I can say is I'm glad I haven't come across one of those locks yet..
The right tool in the right hands and you make it look so easy, nice one my friend ;-)
LPL always impresses me with his skill. He really does make it look easy. Deceptively easy.
"that was pretty darn fast" … gee, you never do get used to the swearing from lockpickers. 😁
Very impressed! You're a very knowledgeable lock picker! 👍
Very neat tool. Its ability to function doesnt make me think that it's witchcraft, so good
LPL's son's first Xmas gift was a lock picking set! 🤣
"And a wittle cwick outa fwree..."
So cute
We have these locks on my building in New York City. Main entrance door & each apartment. At least they’re better than most.
Dude there’s no way in hell anyone but an expert is getting into one of these beasts.
Nice pick!
As much as the key-shaped tensioner limits the pick's use depending on what attachments you have, it definitely looks like it'd solve all but the worst shaky-hand issues by keeping the pick centered. If I worked as a locksmith instead of picking as a hobby, I'd probably love such a specific tool. I treat locks like puzzles though, and a tool that's too good can make it harder to have fun.
Just picked my first assoy lock with a nasty keyway :) great vids learning a lot. Keep up the good work!
I really want to see a collaboration between
LockPickingLawyer and Steve1989MREInfo. The tone of the voice, way of presentation, signature phrases really hit the same vibe for me.
"Alright, let's get this out onto a pinning tray. Darn nice!"
Should he pick his meals too? 😂
"Im the lockpicking lawyer and today im going to show you how to open a lock on an SCP containment unit"
Plot twist: the unit is his.
I love how locksport has become a bit of an arms race. Lock companies started making locks that make standard picking nearly impossible, so lockpickers started making specialty picks to defeat them. It's the lock companies' turn to escalate the situation again.
Much of what the LPL said went over my head, but still very interesting and informative.
lining up with the pins, the click when a pin gets set... Very satisfying seeing that pick in action.
Well, that pick design deserves my bow-in-the-presence-of-the-royalty-or-heir. And CNC of that was quite 4-coordinate, at least. I _really adore_ of the author of that picking tool - even I'm not ever interested in picking locks IRL - but engineering was HATS OFF! My respects and abdication being somewhat of metalwork designing engineer.
Vladimir Looks like lathe, then regular router milling, with knurling before or after milling. The milling stage includes a threading step for set screws. The blades look like stamped or milled sheet stock.
I want a timelapse of you putting the locks back together at the very end if you can, it is very nice to see, thank you.
Have you found the ball bearing?
It's probably still rolling.
@@anononomous That reminds me of the classic 1960s song, rolling in the wind.
I love the lyrics. /How far can an anti-drilling ball bearing in a lock roll after the LockPickingLaywer guts the lock?/How far across the shop floor in the basement where locks go to die will it get? Will a strong gust of wind pick it up and blow it away? The answer my friend is blowing in the wind that is pushing the ball bearing along/
the year 2075 called, they said that ball bearing is still rolling.
This is where a magnet comes in handy.
James dean.
Yes! I was hoping you would do Mul-T-Lock. But, I did not see anything having to do with the floating disk that's beside the row of milled dimples.
Lockpickinglawyer posts video:
Companies stocks dropped by 50%
stinks
At least for higher quality locks, they just make better locks.
For lower quality locks the buyers don't care.
xBlueTornadox Well these are from a strong company, and I don't think this is advertised as their best model (they probably have a 6 pin version and almost certainly an electronically enhanced version).
The multlock cliq is the new gold standard. Good luck manipulating that
Mul-T-Lock is very good and hard to pick,it looks easy but it’s not,you can upgrade customers locks to Classic Pro or MT5 +
Seriously that pinning tray! Awesome
Your intro is perfect btw. The way you hit the same notes with the same words is as good as it gets. Did a professional tell you to do it that way or is it more natural talent?
It probably comes with his profession. When your job is to persuade people, speaking clearly, unambiguously and with a cadence that makes what you say stick in the minds of listeners is probably really helpful.
Thas tool need something on the detaining screw and that tool is amazing you opened that faster than I seen you open up any other multilock
That tool has been out for a while. The Chinese have a video about it on YT. Of course it's not in English but you can't have everything.
Can you provide a link, sir? :)
@@wonderofu8073 Not at the moment, been a while since I last watched it. But you should be able to search for it.
@@wonderofu8073 OK, here's one. th-cam.com/video/gsxnn9XTbfc/w-d-xo.html Better check this channel they have some more tools. Seems it's a French company that makes dimple picks and decoders.
@@wonderofu8073 Here's another strange one. Seems to be for car locks. The channel has more than one video on this.
th-cam.com/video/hJaJRXpwIvs/w-d-xo.html
It’s for 7x7 not pin in pin,we actually have 3 in 1 that does both
I swear you sound exactly like my dentist when you are doing your lock picking thing. Except the only thing he is good at picking is the money out of my wallet.
That color shift at 4:44 really freaked me out! I was watching LPL on a new TV for the first time. I had to open the video on my phone to make sure it was the video and not my screen.
Last time I was at NYC, I saw a lot of Mul-T-Locks.
love it! well done to the man from Brooklyn. thank you for the video.
A job well done and fully explained. May i ask is this for sale to the General public, in your country, and in England. Also the current cost. All your vids are exceptional well done, bill.
Wow! That was cool. Awesome pick with that tool!
I am the head locksmith at Columbia University all we use is Mul-T-Lock interactive. This pick is made useless it would seem by the addition of side pins and/or back pins to the plug. I have every intention on getting this pick to try it out. In an institution picks are basically obsolete and everything is masterkeyed with no reason to pick for lockouts.
😎Only you would have a cut away ..Great FANTASTIC VIDEO great close up video buddy well explained can't say enough about this video. 🌟⭐🌟⭐🌟😎
SUNCOAST PICKER the cutway lock was made by Vitaly Rotor
"He picked the lock in 15 minutes, which is far more impressive than anything I did with it" he says before picking the lock in just under 1 minute
To be fair, he said the picker he gave the tool to not only had never tackled a mul-t-lok, but had also never attempted a dimple core either. This man had zero experience with the base version OR the upgraded version and picked it in only 15 mins, first try. That honestly IS impressive.
Where can I purchase the core holder that fits your PanaVise (shown at 2:47)?
so much for extra piece of mind on my new $100 dollar lock set
i'm still flummoxed as to how you pick the outer pin first and then the inner pin. with a handheld pick, i would imagine lateral variation, but with this one, locked into the keyway like it is, it seems like all you have is depth and rotational variation. the rotation variation with this kind of pick could allow you to select lateral position of the tip of the pick, but it seems like it'd sweep up the inner pin (or at least risk it.
anyway, nice picking. i will add that i think your prior grey metal tray was easier to focus on than this one (probably due to shininess/reflections) - your more recent videos seem to be slightly off on focus when you zoom into a closeup of the pins. when you have something up close but in your fingers, the focus is great.
thanks!
Such a precision instrument!
Is there a video where you describe your terms? Click, binding tightly, false set, etc. I'd love to know exactly what they mean and see what's happening when each occurs. Thanks!
Great job picking brother as always and thanks for sharing it with us
Definitely an impressive piece of kit !
It's amazing that you can open this complex lock.
You say the "Rotapik" made short work of the lock, when in fact it was _you_ who made short work of the lock. There's an old saying LPL...
"You can have all the tools but you've got to have the know-how."
That's it right there Boom!💥💨😲💨😀
would like to see the keyway more clearly. I have a dimple lock with a rectangle keyway and no warding. When you try to wrench it rests against the first pin. Soon as you set that pin the tension wrench is loose. So I am watching carefully for dimple and keyway on them.
ive never even locked a door or turned a key before but i love your videos
That's an impressive pick and your skill with it amazes me.
That is a good showing of how good LPL is. 15 minutes is a long time to be picking a lock. I am sure that was not under pressure as if trying to get into a home where the owner is paying you to open the lock because he dropped his keys while out.
Very useful tool and wonder how many locks the extra blades would cover or is it for MulTLocks only?
Great video
Just Mult-Locks I think.
06 05 08 264 interactive + and all the other knockoff .Does everything besides MT5
No it can fit many other dimple locks(or at least the one I have does) have a look at my videos to see it open other locks.
Probably in UK in USA we don’t have other keyways
@@GxAxV , I've only heard of them so thanks.
LPL: "...helps make the most of your existing packing skills."
Me: dear God, he'll be unstoppable
Did the white balance change or am I having a stroke?
It did, multiple times. Results from the use of auto white balance. Would be better to do the white balance once and then keep it. I think there is no change in lighting because it's indoors, so this should be fine.
Michael Clarke I thought I was having a stroke too especially at 4:40
Sadly when I had my stroke a real life white balance shift did not occur... Would've been much cooler than just the standard fare of garbled speech and droopy face imho.
I'm about to take up this sport to help me with coordination among other skills.. So fingers crossed I can ever be as good as lpl or bb...
XD max pain
Dunno, if you could smell burning toast, you’re probably dead by now. Condolences.
Nice work, I was just looking at that tool 2 days ago. seems like a pretty cool thing to have
Great tool and great explanation.
Would have liked to have seen you pick the training lock.
How can you differate between inner and outer pin with this tool? Are there markings or is it just feeling?
Naly you don’t even need to know which you are on. The pick wire tip is shaped in such a way that it pushed both at the same time but can also reach inside the outer pin to get the inner when it’s time.
I own a lot of mul-t-locks and while it’s probably more than overkill for my home and padlocks for general use, one can’t help but be disappointed by its security after seeing how fast LPL can pick it.
That rotor pick looks amazing! Without the tool how much longer would it have taken?
Look at his many multilock vids. I just watched one where he had it open in under 1:45 👍
JC lpl is a really good picker though
I really love the idea of the people selling you locks also selling the means to disable the lock, do they furnish the addresses and lock types as well? Picking devices are highly Illegal here in Australia.
Can you show us a video with this tool on the cutaway lock? just to see mechanics of it? :)
I didn't understand how you made it manipulate outer and inner pins. Otherwise very impressive.
Small movements of the pick with very precise placement. Essentially he centers the pick on the pin to hit the inner pin, rests it on the edge of the pin to hit the outer pin.
Thordan: Thanks!
I had the exact same thought. There is only one marking for each of the pins so how to judge under and outer pins 🤔
@@packered thanks for explaining that.
@@roysammons2445 You'll notice when he's doing the outer pins, he's not on the markings, but offset a bit. He's right on the markings when doing the inner pins.
It was interesting seeing your lockpicking with the tool since it very clearly shows your movements (both the depth of your pick, and how you rotate it)
This channel made me realize how many people there are like me who are masters at opening locks.
There’s levels to this. There’s a guy on another lock picking channel that literally complained for 7 mins that this tool didn’t work on this lock. LPL did it in literally one min AND described pro n cons of the tool. There’s levels to this fellas be humble
Would I be right in saying the Lockwood MT5+ profile the VPIL uses (843 - Oakleigh factory exclusive) is one of the instances where you'd need that additional key guide? 🤔
I just got my first lock pick set yesterday because of your channel and I was wondering are you using the pick as a lever to lift the pins up, or are you rotating the pick to lift the pins up?
Where can i buy this rotar pick?, very nice tool
Fun fact: In Israel these types of locks are almost exclusively used
Their slogan should be “so easy, it’ll make you feel dirty” cause you opened that lock so fast
LTL. I do not know why I find your videos so captivating. Maybe I just enjoy learning stuff and you are really great at your tutorials. Your breakdowns. Your comedy. Please keep these videos coming I will watch every fucking video because I enjoy it no stupid intro no please subscribe hit the like button blah blah blah just Bare Bones content and it's good thank you
Thankfully the chances of the local thieves having one of those tools is minimal. Nice pick.
Unfortunately a good, solid kick is all it takes to open most residential doors. And if that doesn't work then a hammer will easily open most windows.
Either way, common burglars don't pick locks.
@@youdoitillwatch windows. Especially unlocked ones.
So frustrated with my E11, been trying for 12+ years to pick it, never set one pin. I jte to think how many hours, all different picks, Multipicks, Goso, homebrew, nothing changes the dead response. Everything springy, apart from maybe pin 1 occassionally disappearing beyond the keyway ceiling, but there’s zero give in the core, as with other Mul T lock interactive euros or ovals. I’ve picked an E14 and a C8, both held out for a long time, but one day, 5 binder, with successive clicks and core give, then clunk, deep falsey and tickle of one or two inner pins and open. Any ideas before i dissolve it in acid, would be welcome.😭😭😭😭🤷♂️😆♥️♥️♥️
How does this tool move inner and outer pins separately? It looks like the tool is turned anticlockwise for the outer pins and clockwise for the inners, but if that's the case I'm very surprised it wasn't mentioned. In a similar line, since there's only one loose spring in the bible behind each pair of concentric driver pins, is there a second spring acting between each of the outer and inner driver pins to preload both inner and outer pins against the key?
LPL is there any high security lock you can't pick up till now?
Also is there any updated video with hardest locks to pick up?
Pretty impressive lock.
Hey this question doesn't have to do with this video. I have recently had your channel show up on my feed and your knowledge has inspired me to get a basic kit and some practice locks. So i picked up three sparrows practice locks, a standard pin, spool pin, and serrated pins practice locks. Ok so the question i have is when im picking the spool practice im not getting any counterotation from the pins, it to the point where i have takin all the tension off core and still nothing. Why do you think this is happening.
The very interesting advice. Where'd you come by that?
I need this man on my heist team!!!
A whole minute, using a specific tool, that counts as high security on the LPL scale surely.
He didn't show how fast it would be without the tool though
He did say that it took someone less experienced with such locks 15 minutes to pick it with this tool. So a burglar without it might take lot longer
Michał Pietrzyk a burglar would not be able to pick a multi lock to be honest, they require a lot of skill
What about the MT5+? Wouldn't that tool be in the way for the sliders? And the spring at the end?
arnipoldus this tool doesn’t work with MT5 +
@@geolocksmithbk I thought so, I would love to see LPL give the MT5+ a shot. I think they are much harder than the Interactive, but I am curious to see how much harder for a hard core picker.
I've a couple of questions. On the driver pins, are the inner pins "captured" in the outer pin? I didn't see any of them separate. Also only seeing one set of springs, I don't see how it can tension both inner and outer pin if they are different height cuts?
Question for the LPL,
is it safe to leave the key (rotated) in the lock on the inside of the frontdoor? (lock is a Litto/ASSA ABLOY, Euro profile cylinder type).
this way it's not possible to insert a key from the outside (lock bumping).
But would it also help against picking or raking?
(key is on a keychain and therefore not possible to push out and slide back on a paper sheet under the door).
Can you pick that cutaway and get a view for the camera of the inner workings at the same time?