just a little fun fact, if you want professional looking molds that you can sell or whatnot, you can go onto etsy and get a custom cut acrylic piece for the shape of the shaker you want, and then have them make an additional hole in the middle for how big you want the actual shaker part to be (the acrylic piece should be about 1.5in-2in depending on how deep you want your hole where you can fill it up with the shaker bits to be). For example, if i wanted a custom shaker mold in the shape of a circle, i can go onto etsy and get it custom cut and then have them make a smaller hole in the middle of the piece. You can then purchase your own silicone mold kit from amazon and make your own custom mold that way! i hope i explained it well!
I soooo needed this!! I’ve been trying to figure out how to make my own shaker molds but for the life of me I could not figure it out!! Cheers for the awesome tutorial!!
Thank you for this!! I have some shapes i need multiple of but i dont have funds to pay $18-22 for multiple of the same one so i want to make my own 💙 and now thanks to you i know how 🧡🧡🧡🧡 tysm
I've been doing this for non shaker molds for a decade but it never occurred to me to try with shakers. Thanks so much for sharing, and for being so adorable. Srsly, what even are you ♡🥰 (spoiler, you're an angel)
Using cookie cutters would work too 😊 also I do hope your channel gets more views in the future this is a very simple and easy to understand tutorial 😁
@@meetyounever6923 you could roll the clay out very thickly and cut it with cookie cutters as is and then add details, or you could do what she did and cut out 2 pieces and stack them and then add details. But the cookie cutters would give you the same constant shape for accuracy. If that makes any sense? 😅 So for instance, if you wanted to make a star you could get a cookie cutter with that shape and roll the clay out very thickly. You could even layer it at that point for a very thick foundation to work with, and then use the cutter for the shape. Then use her tutorial for the rest of the work to make the mold.
I’m glad you liked the video! For the test charm I show at the end I used a clear plastic bail from Sophie and Toffee: sophieandtoffee.com/transparent-clear-plastic-blank-bails-for-beads-60pcs/ I’m currently using these metal pendant bails for my charms: www.rings-things.com/Products/Aanraku/Aanraku-reg-White-Plated-Jewelry-Bail-Cast-Small.html?_ga=2.48711846.1048143685.1599752367-1783285680.1596902348 but you can find similar ones on Sophie and Toffee’s site as well. I’m planning on making a video on how I create the actual charm- it’ll be the video after my next one, so keep an eye out for it in the future. 😉
![เจ็บที่ยังฮัก - ม่อน วรวิทย์ [ Official Mv ] จอนนี่มิวสิค](http://i.ytimg.com/vi/KALIGSRSjFs/mqdefault.jpg)
just a little fun fact, if you want professional looking molds that you can sell or whatnot, you can go onto etsy and get a custom cut acrylic piece for the shape of the shaker you want, and then have them make an additional hole in the middle for how big you want the actual shaker part to be (the acrylic piece should be about 1.5in-2in depending on how deep you want your hole where you can fill it up with the shaker bits to be). For example, if i wanted a custom shaker mold in the shape of a circle, i can go onto etsy and get it custom cut and then have them make a smaller hole in the middle of the piece. You can then purchase your own silicone mold kit from amazon and make your own custom mold that way! i hope i explained it well!
I soooo needed this!! I’ve been trying to figure out how to make my own shaker molds but for the life of me I could not figure it out!! Cheers for the awesome tutorial!!
Aw~ Thank you! I'm so glad you found it helpful.
Thanks for making this video, very helpful
Thank you for this!!
I have some shapes i need multiple of but i dont have funds to pay $18-22 for multiple of the same one so i want to make my own 💙 and now thanks to you i know how 🧡🧡🧡🧡 tysm
Thank you for the tutorial! I was getting tired of making the same ones over and over again. I can't wait to start on my own shapes.
Very interesting and beautiful. Thanks for sharing 👍🏽
Great content! ❤
I've been doing this for non shaker molds for a decade but it never occurred to me to try with shakers. Thanks so much for sharing, and for being so adorable. Srsly, what even are you ♡🥰 (spoiler, you're an angel)
Very nice tutorial and very cute mold! I'm looking forward to seeing this channel grow!
This was seriously so helpful! Would you ever consider opening up commissions for custom molds??
Using cookie cutters would work too 😊 also I do hope your channel gets more views in the future this is a very simple and easy to understand tutorial 😁
That's really neat! So in theory how would you place the gut and details? Would you cut them out separately and stack them?
@@meetyounever6923 what do you mean?
@@meetyounever6923 you could roll the clay out very thickly and cut it with cookie cutters as is and then add details, or you could do what she did and cut out 2 pieces and stack them and then add details. But the cookie cutters would give you the same constant shape for accuracy. If that makes any sense? 😅
So for instance, if you wanted to make a star you could get a cookie cutter with that shape and roll the clay out very thickly. You could even layer it at that point for a very thick foundation to work with, and then use the cutter for the shape. Then use her tutorial for the rest of the work to make the mold.
Aw, thank you! Yeah, cookie cutters are a great idea if you have one in a shape you like.
@@tuffinstuff5786 indeed like a star or a heart something simple
Brilliant, I never thought to use clay for making pieces for resin molds! Thank you so much for this video!!!
Thanks! I'm glad you found the video helpful.
This is awesome! Great tutorial and I TOTALLY wanna see what it looks like when you make the resin shaker!!! :)
Thank you! A video on making the shakers is coming next!
My god ur video so good! So much heart into the edit, the animation and the script!
Really nice vid!!
So that's how it was made. Cool!
Been searching for this. So useful. Thanks so much for the tutorial!
Love your videos
✨This is cute too I hope you post again ✨💖🫶👍💯
Thank you so much for this video 😭 could I ask how you did the hole at the top for your keychain?
I’m glad you liked the video! For the test charm I show at the end I used a clear plastic bail from Sophie and Toffee: sophieandtoffee.com/transparent-clear-plastic-blank-bails-for-beads-60pcs/
I’m currently using these metal pendant bails for my charms: www.rings-things.com/Products/Aanraku/Aanraku-reg-White-Plated-Jewelry-Bail-Cast-Small.html?_ga=2.48711846.1048143685.1599752367-1783285680.1596902348 but you can find similar ones on Sophie and Toffee’s site as well. I’m planning on making a video on how I create the actual charm- it’ll be the video after my next one, so keep an eye out for it in the future. 😉
Gracias, si me gustaría ver como haces el shaker
Thaaaaaannnk yooooooouuuuuu
Did u ever make a video of the actual shaker
Yes 😀
Please do more
Cool
Thank you!
I love critter, she looks like my squishy .... hamster
No follow up? :(
Can you please make the shaker charm for us Please
Of course! In fact, I'm working on it now so keep an eye out for the video soon.