THE OFFICIAL SNOWBLOWER PRESEASON CHECKLIST (Avoid Issues)
ฝัง
- เผยแพร่เมื่อ 24 ก.ค. 2024
- #snowblower #winter #garagegear
THE OFFICIAL SNOWBLOWER PRESEASON CHECKLIST (Avoid Issues). Winter is coming FAST! Get your SNOWBLOWER READY FOR WINTER quick! In this video, I go over everything you should CHECK on your snowblower including the BELTS, DRIVE SYSTEM and ENGINE so your machine OPERATES SMOOTHLY this SNOW SEASON. Follow these TIPS and AVOID ISSUES so you don't get stuck doing a REPAIR out in the COLD! LIKE & SUBSCRIBE!!!
CONTACT INFO:
EMAIL: garagegearjb@gmail.com
INSTAGRAM: garagegearjb
SUPPORT THE CHANNEL or help me take the GARAGE GAL out to dinner!
paypal.me/garagegear?country....
Thank you for supporting the channel!
Armor Skids Website - snowblowerskids.com
WATCH THESE NEXT:
HOW TO CLEAN AN MTD YARD MACHINES CRAFTSMAN TROY BILT SNOWBLOWER CARBURETOR FOR BEGINNERS • HOW TO CLEAN AN MTD YA...
HOW TO REPLACE AUGER & DRIVE BELTS ON A SNOWBLOWER FOR BEGINNERS • HOW TO REPLACE AUGER &...
BEFORE YOU GREASE YOUR SNOWBLOWER AUGERS, WATCH THIS! • BEFORE YOU GREASE YOUR...
LOOKING FOR A USED SNOWBLOWER, WATCH THIS! • LOOKING FOR A USED SNO...
HOW TO ADJUST A SNOWBLOWER AUGER BELT TO THROW FARTHER • HOW TO ADJUST A SNOWBL...
HOW TO CLEAN, SHINE AND PROTECT AN ARIENS SNOWBLOWER • HOW TO CLEAN, SHINE AN...
DOES A TALLER SNOWBLOWER CHUTE THROW SNOW BETTER THAN A SMALLER ONE? • DOES A TALLER SNOWBLOW...
BEFORE YOU INSTALL AN IMPELLER KIT ON A SNOWBLOWER, WATCH THIS! • BEFORE YOU INSTALL AN ...
BEFORE YOU INSTALL A PREDATOR 212CC ENGINE ON A SNOWBLOWER, WATCH THIS! • BEFORE YOU INSTALL A P...
HOW TO CHANGE SNOWBLOWER OIL FOR BEGINNERS • HOW TO CHANGE SNOWBLOW...
PRODUCT LINKS:
Liquid Wrench Rust Inhibitor amzn.to/3JL0iFL
Liquid Wrench Silicone Spray amzn.to/3MtlEcT
Fluid Film amzn.to/3VKXHBV
WD-40 amzn.to/3yUxRS9
Anti-Seize amzn.to/3SS3x1P
225 Piece Pittsburgh Socket Set amzn.to/3nPeEfM
Shear Pins (Ensure fit prior to purchase) amzn.to/3GUTwMc
Ariens Snowblower Cover amzn.to/3AWTjWJ
Ariens Snowblower Mat amzn.to/3CxhsmF
36" x 72" Snowblower Mat amzn.to/30E94nP
Weather Tech Snowblower Mat amzn.to/3LfQbsQ
Ariens Deluxe 24" Snowblower amzn.to/3qT1Gzq
Ariens Compact 24" amzn.to/3qYrcDp
Ariens Deluxe 28" Snowblower amzn.to/3CMOKO1
Ariens Drift Cutters amzn.to/3sOeRCy
Ariens Friction Disk (Ensure fit prior to purchase) amzn.to/3sfS2WV
Armor Skids (Be sure to check size prior to purchase) amzn.to/3GVzrFA
Pivoting Workbench Dock Light amzn.to/3wCa1ur
Gladiator Workbench amzn.to/3osnsbb
Gladiator Cabinets amzn.to/3sk6cWF
Gladiator Floor Cabinet amzn.to/3sfhGuQ
JB and Garage Gear do not own the rights to the additional photos and clips used in this video.
Disclaimer:
Due to factors beyond the control of Garage Gear, I cannot guarantee against improper use or unauthorized modifications of this information. Garage Gear assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Garage Gear recommends safe practices when working on machines and or with tools seen or implied in this video. Due to factors beyond the control of Garage Gear, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Garage Gear.
JB from Garage Gear is a member of the Amazon Affiliate Program and may receive a commissions on select purchases. These commissions do not influence the prices you pay on Amazon. Thank You for supporting Garage Gear! - แนวปฏิบัติและการใช้ชีวิต
For those looking for ETHANOL-FREE FUEL here is a link. Thanks for supporting the channel! amzn.to/3z68NIe
I have gas coming out of breather tube which exits crankcase. Checked oil level, it is EMPTY.
Question is, should I drain the gas, fill the oil to capacity (32oz) then add gas to see what happens.
I inherited the machine, and found these issue's when I started it. Thank you for your channel and wisdom @Garage Gear
@@huckstaunfiltered8200 hey Huck! This is a tough one because I like to see all situations first be hand hand before determining the issue. It sounds like you have a good plan. You’ll need to be a detective here and carefully observe what’s going on with that engine. Let me know how it works out for you.
@@GarageGear I ended up selling it, but thank you for all you do, your channel and wisdom, much appreciated sir. Happy Holidays to you and yours.
@@huckstaunfiltered8200 thank you same to you Huck!👍
When you say , you leave the link down below ., where do i find it
Thanks . This video made realize, i have alot to check .
Thanks again
I cannot overly express my deep gratitude for the information you provide in these Ariens snowblower videos... I have had to undertake the task since my husband died (if it had an engine, he knew what needed doing!) This morning I ran through my notes from several of your videos and was able to start the machine in ONE PULL! This boomer says Thank You so much for the guidance and step by step instructions. Enjoy the upcoming snowy season!
Hey Amy! Sorry for the loss of your husband. I understand that it can be a difficult task at times learning about these machines but I’m glad that these videos made your life a little easier. I’m sure that your husband is looking down at you smiling proudly knowing that you now have the confidence to tackle this winter head on! It puts a smile on my face knowing that these videos helped you out! Thank you for the motivation to keep making more content and thank you for being a wonderful member of our garage gear community! If you ever need any help in the future feel free to reach out!
71 Ariens, 51 years old and still running. Oil change and maintenance is the key. Not like the disposable products today. Ethanol free is used in all my equipment, and like you said, starts right up. A little pricey but as a fellow upstate New Yorker, it's a life saver in my generator.
Hey Tom! You and I are a lot alike! Ethanol free in everything! Thanks for sharing!
Tom - you’re the reason manufacturers have planned Obsolescence! My father still has his ‘71 Ford Ranger he bought new!
Very well covered video JB only two things i suggest: 1. Check oil before running the engine you should see all the equipment we get in with engine damage or seized due to low or no oil 2. Check the electric starter to see if the mounting bolts are loose and use your electric starter regularly to keep it from rusting up on the threaded shaft we always lubricate this point annually. Grease is the most important thing we use a 00 grease in the gearbox and low temperature grease on the hex shaft and gear drives, spray lithium on chain drives. Well done sir!
Thanks a lot Wayne! LOADS OF GREAT TIPS HERE! Always know that I can count on you guys for great additional advice! Thank you for sharing! Thanks always for being cool fans! 👍
Great list, and efficient presentation. Thanks for sharing this video. I was checking my Craftsman 1350 series blower for loose bolts on the handles and frame. It seemed "squidgy", but all the bolts were tight. That's when I discovered the crack in the auger housing, where you split the case to change belts. I am so glad I found this now, and not during the first blizzard. It was a decent day, so I just rolled my 110v flux core welder outside, fixed the crack, and bolted everything back together. Now I wait for Old Man Winter to show up!
Thanks Bob for the positive feedback! I appreciate it! Crazy that you found a crack in the housing and nice work fixing it yourself! 👍 thanks for sharing!
I’m enjoying your videos and have learned a lot about snowblowers! Never had one before, but I picked up a 1978 Gilson for free. Noticed after getting it running that the tunnel had a couple cracks in it. Little bit of welding, $30 carb, a little shave of the valve stems (flat head Briggs) and she works like a champ.
Awesome! Thanks for sharing my friend! 👍
So stoked to make the "tribe" list in this video! As an East Coaster (Newfoundlander) that sees plenty of wet nasty snow, I can attest that all these pre-season maintenance checks are critical! We don't have E free gas here, and I know you have said you don't invest much in the gas stabilizer method. But, I can tell you from experience, Sta-bil is a solid product and will help with easy startup every season! We deal with a lot of temp fluctuations throughout the year. This Jan. alone we have had everything from +12c to -15c. With those fluctuations you never know when you might need a piece of equipment, so I keep it all ready to go! Nothing gets officially winterized. So I love stabil to keep my fuel toped up and ready to go at all times, in my bikes, snowblowers, and all my gas powered equipment! Thanks for all the tips and tricks man, love the channel!
ROCK ON DAN! Thanks for sharing how you maintain your equipment! Thanks for being a cool fan!
Great video JB, I took the advice and the advantage of the nice weather yesterday and changed the oil. I would like to check the belts but I bought this snowblower second hand and a bit worried if I start to remove things I might have a broken snowblower. I replaced the scrapper as well.
Hey Nick! Thanks for the positive feedback! I wouldn’t worry about taking the belt cover off to check the belts. It’s only two bolts usually. Once off you can get a good look at them! Do you know if the previous owner replaced them? Thanks for watching bud!
Great tips JB, any way you can do a checklist for getting a 2stroke snowblower ready for the winter season? You probably don't have one but I just picked up an Atlas 322 that I just fully restored. It's a awesome runner now since fixing it. Anyway just thought it would be a good video for us with single stage blowers
Hey Gary love the idea! My father has one I could maybe steal for it. I’ll see what I can do for this. Thanks for sharing the idea my friend!
Thank you for the great information you are my go to man when preparing my snow blower.👍
You got it Felix! Thanks for being an awesome fan! Appreciate you! 👍
Noob question. 3:38 Why are you greasing the shaft to the left of the friction disc? It doesn't look like it contacts anything.
Really enjoying your videos! I got rid of a 2-stroke snowblower that clogged up with any wet/heavy snow. Just bought a new Ariens and I'm learning so much! I literally had to watch video on how to start it, just to make sure. Also! I've switched over to ethanol-free gas for all my machines! Heading to Home Depot now to pick up some grease and anti-seize!
Hey mountain, the friction disc slides left and right on that shaft. If there is no lubricant on it the disc can stick and make shifting difficult. Thanks for being a cool fan!
Calling for ALOTTA snow thiz winter. Thankz 4 the tipz!!!
You got it Mike!
Great info , thank you so much!
You got it Riverunner! Thanks for watching!
Thanks for the review. Yes, those Armer skid are great to have compared to the plastic ones that came with my snowblower. Great tips for the gas and battery fuel snowblower except my battery fuel unit has no engine maintenance requirements and just need to pop the batteries in and ready to go.
Right on! Thanks for sharing! Merry Christmas!
Love your content - it's helped keep up and going.
Well, I got the right wheel off (Ariens 30" deluxe) used the anti-seize, and DIDN't just slip it right back on. I can't get the splines to engage. I've seen a tip that you can turn the left wheel but no luck.Any suggestions? Thanks for any help.
Hey mccann! I know what you’re talking about and sometimes I just keep playing with it until the threads line up. Sometimes it’s not always so easy. It’s taken me a few tries at times. Let me know if you get it.
Thanks for the input - I'll keep at it and let you know. @@GarageGear
@@GarageGear
Finally a chance to get to it today (no shop/garage so have to have cool dry) Spent an hour pushing, poking, turning with no luck. Called my nephew to have a look at it, and in 2 minutes doing exactly the same things, it slid in.
Turns out you have to have your tongue out on the LEFT side! 😀
Thanks as always for your help and great content.
Mark
@@mccannms glad you got it! Thanks for being a cool fan Mark!
I enjoy your videos, and I have learned a lot about snowblowers that I should’ve known. I have a question about when removing the belly pan and tipping the snowblower on its auger. Did you drain the oil and the fuel out of the machine first or did you leave the gas and oil in the machine?
Hey Jeff when tipping these oil should be fine. Depending on where your gas spout is you’ll want to probably only have less than half a tank of gas inside before you tip it or some will leak out. 👍
@@GarageGear perfect, I just bought the Toro PowerMax 826 OHAE. I'm going to lube it up and use the rust inhibitor on it. Keep up the good work on the videos.
Great tips. Thank you for this video. Now I need to do all of this before the first snowfall.
Awesome Chasbro!! Thanks for watching!!!
Great video, thank you.
Thanks a lot Vito! Thanks for watching!
This video is awesome! Super in depth BUT you made it crystal clear. I’ve been following your advice on my snow blowers and I notice a HUGE difference in how much better they run off your advice!
Awesome Tanner! Super excited to hear this! I always wonder if people out there are using these tips on their equipment! It’s one thing to watch a TH-cam video it’s another to put it into practice! Thanks for being a cool fan! 👍
@@GarageGear one question I have!! With in regards to the gear oil, how often should that be changed if ever? Should you change it every year or just top it off as needed if it’s ever low?
@@tannerc900 that’s a great question. I don’t have a specific time frame but I would say once a year if you use your machine a lot. Most people could get away with every couple of years but checking it is never a bad idea. I’ll be doing a video on this at some point soon. If you have a non serviceable gear box like I do on my newer ariens then all you do is add when needed on the top. Thanks for watching another my friend!
It's so much easier going over a machine in a nice clean well lit shop with a clean machine to work on. I run my machines thru my pressure washer and let them dry good before tearing into them. It's so much nicer to replace parts now then to have to do it in the dead of winter when you should be using it, not fixing it.
Totally agree David! Thanks for sharing!
All great tips, especially the greasing of the axle shafts. So many people never think of that. If you can't get the wheels off easily that can make a simple repair a giant hassle. Looking forward to seeing that old Ariens blow some snow this winter!
Hey Smallblock! Thanks my friend! Got some new tires to put on that old monster! Video coming soon. Can’t wait to blast it with that thing! 👍 tons of content coming on it!
Great video as usual JB. Doing these steps before it snows ensures you will be running smooth in the snowstorm!
Thanks a lot lawn lover! They better be with all the work I do to them lol! I feel honored to to have a TV star commenting on my videos lol! Keep on ROCKING brother!
@@GarageGear 😂😂😂
Ethanol free is a must, I even use the stabilizer as well. These are great tips JB! ( just curious where you get your ethanol free from) I prefer the one where you can get your car washed too. I gotta stop by one of these days….and check out that cabinet contents. Didn’t forget about that! Awesome video! Enjoy this summer weather we’re having. Cheers neighbor!
ROCK ON JAY! I get my ethanol free at the speedway on Walden and central! Second pump in on the central side! You are welcome to stop by and check out the cabinet contents! You’ll probably be like, “that’s it?” Thrill of knowing I guess lol! We’ll set something up! You enjoy the weather too my friend! You never know it could be the last for a while! Cheers! 🍺
Yeah you never know what's around the corner weather wise. I also frequent that gas station as it's much closer actually to both of us. Enjoy the rest of the weekend buddy!
@@jaybooth4815 hahaha this world is getting smaller by the day! Back at ya my friend!
I have found the machines run the same on FRESH 87 to 91 octane gas whether it's ethanol free or not. The secret is using ethanol free on your last runs of the season therefore storing it with ethanol free gas.But to use ethanol free gas all winter is much more expensive
Great demonstration and very educational. I'm getting my snowblower ready for a MN winter.
Appreciate you my friend! You’ll be more than ready!
I get ethanol free gas for my snow blower from Lowes....True-Fuel for four strokes....it is more expensive, but I believe a higher octane...They also have 2 stroke premix ready to pour I use in my weed wacker.
Awesome Louie! You know how to roll! Get the good stuff! Enjoy your weekend my friend! 👍
Great tips. I learned the hard way that lubricating the axle is necessary. My wheels are seized in so, hopefully i dont get a flat tire or the friction gear does not wear down. So far so good. This tlc saves a lot of money and peace of mind.
Preventative maintenance prevents poor performance! Thanks for watching mvg!
Late to the game here, but your thoughts on "alkylate gasoline"? At least here in Sweden we're recommended to use that instead of anything from the pumps. I think we can't even buy ethanol free gasoline here.. But maybe your ethanol free is the "same" as our alkylate?
Hey Chris I don’t believe they are the same. They don’t sell that here and I honestly don’t know much about it. I assume they sell higher octane or premium fuel by you. Many subscribers here use that.
The best thing is putting rubber wipes on the paddles. You will double the distance the snow will shoot.
Yep done many videos on that here on the channel! Works extremely well! Thanks for sharing!
Those gear boxes won't last long using grease in them. Like you said, once it gets pushed off the gears (first 5 minutes of use) it's worthless. Run 80/90 weight gear lube (used in car differentials) which is what you are supposed to use in a gear case. I use synthetic which is even better.
Thanks for sharing David! 👍
Thanks for the tips great video.
Thanks for watching Paul! 👍👍
I totally agree with you bro
Thanks for watching chris
I love watching your shows bro
@@chriswagner6310 appreciate you my friend
I appreciate you too my friend
Thanks again for sharing your experiences and wisdom.
🤟😎🤟
Knowledge that is not used and spread to others is wasted right? Thanks for watching Mehrzad!
Awesome content. I discovered the channel and have been watching almost every video lol. Just picked up a new ariens classic 24. Can’t wait to put it to work here in wisconsin!
That’s awesome Logan. Your machine is gonna be a beast! Have fun with it! Thanks for being a cool fan! 👍
Thanks for posting this video. I just picked up an Ariens Platinum 24 SHO. I was thinking of lubing up the new machine before the season started ?
Awesome Jeff! Congrats on your purchase! Definitely a good idea! You’ll be all set to go!
Great vid, JB.
Unfortunately, I'd have to travel over 3 hours to buy ethanol-free gas.
Long Island (all of it) is considered the "Greater New York (City) Area" and well, you know how that goes.......
So I have developed a system to deal with the ridiculous corn gas.
I'll buy 93 octane and treat it with a mixture of Sea-Foam and Stabil 360. The treated fuel will last a month easy, but after that, the treated fuel gets drained from the machine and dumped into my truck. And it's back to the gas station for some fresh gas.
It's a pain in the ass, but it's better than dealing with carb problems.
After the season, the blower gets drained and filled with engineered fuel (TrueFuel) and I let it run on that for 5-10 minutes. It can then go to sleep for the summer.
Anyone can overcome the ethanol problem, it's just a little more work....
3 hours holy cow!!! I can’t believe there’s nothing closer to you bud! I would think that in a populated area that you’re in there would be a pump somewhere. That’s crazy! Your smart for taking all those steps. Carb issues are a real pain. What kind of blower do you have my friend?
@@GarageGear Yeah. It sucks.
I’m running a Troy-Bilt 3090.
357cc with an impeller kit. It’s a monster for the snow we get out here on the tip of LI.
I had an old Craftsman II Trak-Drive with a 5hp Tecumseh that I ran for years. Hence my hatred for those engines. Lol
@@paulmysliborski4832 that Troy bilt sounds like a tank! That’s a lot of engine! I’ve worked on a few of those craftsman blowers before 😒 you’re in good company. 👍
We’re all ready over here!
I hope so lol 🤣
As a new owner of a 28 deluxe, I'm weirdly excited for snow this year. Thanks for all your guides
Nice my friend! Great machine! You’ll have many years of great service from it! Congrats on your purchase! Thanks for watching!
Congrats, brah. Check out his other snowblower maintenance videos, as they go in depth. I’ve learned a ton.
@@FUTH-camCensors glad you have found them helpful! Thanks for watching bud
I needed to see this video. I have several snow blowers and had many breakdowns during last winter. Shop cost added up. This video will help me lower repairs this coming winter
Awesome! Glad you found this video helpful my friend!
Some of the Ariens are experiencing the spring breaking on the auger engagement controls. Check with a dealer/service to see if you should get a replacement.
Thanks for sharing Edwin! Appreciate it! 👍
Good info as usual! Remember to hit the grease fitting when you have the wheels off.
Good point! Was thinking that but not all blowers have them. Guess I shouldn’t have skipped that one lol! Thanks for watching D!
JB
I have an Ariens Deluxe 24 snowblower model #921024. I need a replacement friction disc. The Amazon link that you have provided links to A friction wheel that replaces old P/N 0170800 (now superceded by P/N 09475300) which is listed in Ariens parts diagrams for my machine. The Amazon description lists all the model numbers this disc fits, but mine is not on that list. I'm confused to say the least. Can you confirm that this friction disc will work on my machine? Thanks for any help you can provide and for the great videos on snowblower maintenance and operation!
Tony Infante
Hey Tony! I looked your model up on jackssmallengines and this is what I got. Pretty sure it’s the same! Here is a link www.jackssmallengines.com/jacks-parts-lookup/part/ariens/09475300 thanks for watching!
Great content that is timely. Got the first snow here in MI this week. It 70’s now. Go figure. Next project is that disc inspection and possible replacement. Keep the videos coming. Are you going to the eq expo?
Hey Ed! Thanks as always my man! Saw brief flurry here in Buffalo but that was all. 70’s here now as well! Could be a busy winter with snow! I’ll be doing the disk replacement soon here! Wish I was going to the expo. Maybe next time around! 👍
I've had Armor Skids on my 13/32 pro for 10 years and still like new
They wear like iron!
Just did this stuff this weekend! Keep it up!
Awesome Greenhorn! You’re good to go! Thanks for watching
Love the videos you've been posting. I just got my first snowblower and learning a lot from your page already. Thanks for all the work you put into the videos. Wondering where you got your snowblower mat. I'm looking for one now
Hey Ben! Appreciate the positive feedback my friend! A lot of work goes into every video!
Here is a link to the ariens mat. amzn.to/3SAFjZX
Here is a link to the weather tech mat I have as well! amzn.to/3Ddbqcj
I’ll be mentioning these mats in my upcoming video this weekend! Thanks for being a cool fan of the channel!
Great more work to do this weekend while it’s nice out
Get on it Gary! Don’t make me come over there lol! Or should I?… 🤔 you know to hang out! 🤣
I just bought a tube of Marine semi synthetic Marine Lower Unit Grease. I think tvat grease it very viscous and made for gears.
Awesome! Hope it does the job for you!
Question for you please. I don’t have fluid film but I have Blaster surface shield, not sure if it was a good idea or not but any exposed bolt, nut, screw I hit with some of the surface shield. Even the nuts that hold the wheels on I hit them with and then sprayed on the painted wheels. Does it make a difference if spray it on then wipe it around or just spray it on and just leave it? It’s not globbed on there or anything like that. I just did it like you do with wd-40 in the auger bucket, just spray it all around and just leave it.
Would wd-40 be better than the surface shield on the painted surfaces or is neither needed since they are painted?
Blaster surface shield is very similar to fluid film and works great! I would say that surface shield would hold up longer! 👍
Hey JB. Doing my pre-season on my Ariens 8526. Sticker say model 932105.
I had a shear pin break last year. Bought new ariens pins not aftermarket. The pin is the model # listed in the manual but will not fit because just past the threads, there's a tiny "flare" that steps up to the shaft size. Virtually every shear pin has this. The shear pin in my blower now does not have this "flare" and it will fit in either hole so there's not an obstruction or something. I'm really at a loss for what to do.
I'm a subscriber, I've watched your channel for a long time, and I'm a local WNYer and I have to get this done before winter. Any suggestions?
Thanks for being a cool fan from WNY, Scott. I wonder if you could take a dremel and carve off that flare. I would say the sheer pin should be fine. See how that goes and let me know. Feel free to shoot me an email with updates.
Snowblower content rules!
It’s the most wonderful time of the year lol! Thanks for watching Mace! 👍👍
I’m new homeowner and really getting out on my own finally, dumb question how do i get rid out carb cleaner and break cleaner/part cleaner after using? Do i dump the liquid with used oil or what?
James congrats on becoming a new homeowner! Great question that I don’t have a perfect answer for James! I’m a teacher at a vocational school and I take mine there for disposal. I heard that towns have a pick up day for specific disposals or you’ll Have to call to have it picked up. Might be worth a call to your town. Thanks for watching! 👍
watched your vid did service on my 2006 ariens ,,belts rubber drive look great ,,greased up ready to go...oil still clean as i use only synthetic oil in everything i own..
You’re all set for anything this winter Craig! Happy snowblower season! 👍😉
Enjoying your videos my friend
Thanks for being a cool fan Alfredo 👍
Is it a problem to tilt the unit up like you did to remove the belly pan? Will the oil drain out?
Hey Tom! Great question! Tilting the snowblower up like that is actually called the service position. Most snowblowers should not have an issue with leaks. Only seen one snowblower slowly drip oil from its spout when tipped up like that. If your concerned about it leaking. Drain the oil out and make sure there is little to no gas in the tank then tip it up. Should definitely not have an issue then. Thanks for watching!
Regarding wife's windshield, have u ever considered an Auto Repair clinic? (Lol) BTW, LOVE ❤️ that 71 Ariens! Keep-up all the good 👍 advice @ vids!
We had our guy fix it the same day so we’re all good! 👍 might sprinkle in a few clips of the 71 in some remaining winter vids well see! 👍 appreciate you bud!
If you are answering, I'd appreciate a reply. My Troybilt 2520 is brand new.
I used it once, lots of snow,
Just fine. This time, got new gas can, new gas be
Cause I was almost empty, Chevron Techtron not regular, the next one up,
And put in some 2 cycle
Fuel stabilizer. Couldnt
Start it. Sitting here writing
This just looked at the stabilizer and REALIZED
ITS OIL!!!! Thought fuel stabilizer would go in the fuel! So now it's in the gas!
My hubby just died (didnt know much mechanics) and I was always the
Quote-enquote mechanic
But new to fuel and oil.
How to fix this, in Alaska!
Thanks for any help....
Karen
Thought I'd put good stuff in to help the
Hey Karen! I believe what needs to be done is the following.
Flush out the gas tank with regular gas to get all gas/oil mix out.
Then take the carb off and give it a quick cleaning with carb cleaner.
My guess is this should take care of it but I’ve never seen this before.
Hopefully this is all that is needed and there is no permanent damage done to the engine itself. My guess is if you did this and got it running it would smoke for a little bit as it burns off the oil.
If this seems a bit out of hand have a shop give it a look. Thanks for watching Karen!
Just bought a used Ariens 28 deluxe SHO AX 306cc and it leaks gas from the carburetor when in service position. What can I do to fix this. Love the videos super helpful
Hey Anthony! I would start by checking your bowl seal. Could be deteriorating or out of place. I would also make sure your gas is shut off to your carb before tipping it. Let me know what you find. Thanks for watching.
Mine will puke out part of what's in the float bowl out of the overflow, so I usually shut the fuel off and run the engine until it dies before tipping it up. If you still lose fuel when you tip it up, it's worth looking at the bowl seal (there's still a little fuel left in the bowl after running it out) and at your fuel shutoff.
@@timdelph9048 Haha! Watching random videos to get ready for the winter and there he is! Tim-friggin-Delph! GP represent! Wenatchee River RD too! Get any new saws lately?! 😜
@@timdelph9048 Will do buddy! Congrats on the kiddo! Mine's almost 13!! We're getting old.. 🤣🤣🤣
Great video as usual. Great way to start the weekend!
Thanks for the positive feedback Michael! Enjoy your weekend! 👍
Now THAT'S a video!👍👍👍👍👍 I'm off to the garage💪 Several tips were not on my check list🤔🤔Got it now👍 Still 🙏❄❄❄❄❄
WILLIAM! Rock on my friend! Sounds like your to do list just got a bit longer lol! I have a feeling the snow is on its way for you! 👍 enjoy your weekend my friend!
Right on time JB...Warm today in Canton Ohio so I am getting ready....Your tips are great. Thanks
Awesome Cliff! Use this nice weekend to get ahead! Thanks for watching!
we will have nice weather for two weeks in ohio,,,good reminder for me to service my ariens .thanks for the vid.
@@Monza62000 you got it Craig! Thanks for watching!
Love it!! You're the modern version of Tim the Tool Man!
Hahaha loved that show! Now I just need a project hot rod in the garage! 🤔 thanks for being a cool fan Brandon! 👍
@@GarageGear haha 🚗 yes! I sent you a longer question via Instagram ✅ if you ever check... Thanks!🏁👍
@@brandon_burbach got it I will take a look my friend! 👍
👍👍👍
ROCK ON FLINT! 👍👍👍
Skids... I end up doing a dozen or more driveways and a couple of miles of sidewalks in my neighborhood every snow. Needless to say, traditional skids only last a season and a half.
So, with some angle iron and a couple of cast iron casters, I have a fully rolling machine! Another benefit of the modification is no skid adjustment necessary. And, the scraper on the bottom sees very little wear.
th-cam.com/video/J_uXxLUTCH8/w-d-xo.html
Awesome modifications Russell! Getting that 301 on does require some changes to be made but works like a charm I’m sure! 👍 thanks for sharing!
HI JT-how would you lubricate the gearbox on the craftsman 24 inch in the video? Do you remove the “blue dot” and fill from there??
Yes but I’ll be doing a video on this soon. 👍
Don't let me c u operate that 71 Ariens without the 1971 Christmas sweater. (Official merchandise!)
Hahaha I’m still working on that! Gotta hit up an ambers or something to find one probably! 👍
Good video and HAVE a good day
Thanks a lot leadfoot! You as well! 👍
Fuel treatments are crap. Just check out Taryl's 2 year experiment. Most didn't do anything differently than reg gas w/o treatment.
Hey Tundra Guy! Good to hear from you again! I’ll have to check this out! Thanks for sharing!
Ah, there's the 71 Ariens-is stabalizer for operators that aren't too stable?
Hahahaha perhaps! That 71 will be around for a while! She ain’t going no where! Just hiding under a snowblower cover at the moment.
Can you do the same video with a Ariens Rapidtrack platinum ?
Thank’s
Would love to! Want to send me a rapid track to work on? Lol
Hey there. After greasing up and putting back the shearing pins, does it matter if the augers are in unison, should they look symmetrical? Thanks
Hey Tony on some models it matters. You can’t go wrong putting them in similar directions. Thanks for watching!
Hi JB, I see you’re holding up a set of 2390 Gates Belt's, are they the replacement belts for Ariens Pro OEM#-07200608 belts?
Those belts are for an ariens deluxe model.
I have a Troy Bilt storm 2460, it just has a rubber plug on top. I’m assuming it came with grease. If I were to put the 75w90 gear oil, as long as it doesn’t leak out of the gear box it should work ok??
Hey swagger! Most newer blowers don’t use grease. They use an oil. I would say you’re probably fine going that route. Thanks for watching another!
@@GarageGear appreciate it. Will give it a shot. I thought I had already but I subscribed. Keep up the great videos man. That are appreciated
@@swaggerjacker1482 you got it Swagger! Will do! 👍
Hey JB love your videos. Curious what your opinion is of the craftsman snowblower line? Thinking either Ariens or craftsman but there’s a big difference in price.
Hey Paul! I have a video coming soon that will touch on this a little bit I’ll tell you now that I lean toward ariens. Better engines and build quality mainly. They’re not bad machines but I’ve seen over the years where they have cut corners. Thanks for being a cool fan of the channel. 👍
@@GarageGear you’re the man, thanks
@@newyorkcammby you ROCK bud! Stay tuned!
Let's convert that cable chute to a crank handle
On which model?
AND SO IT BEGINS!! Another Snow Season!! Ahhhhhhhhhhhhhhhhhhh
Love this channel
It’s time to get going with these things! Plenty to do on them! Happy start to the snowblower season Pete! 👍
@@GarageGear Yes Sir!! Oil and grease gunned it last week. You're 100% right about the ethanol. I just cant get it locally so i go with stabilizer. Have you done any videos on changing a auger or drive train belt? I ordered all my backup gear in August 🙃 lol thats what i fear when im out there taling care of 3 driveways + the impeller has (dont know the mechanical term) the impeller has 2 smaller straight small pieces of metal keeping it aligned. Dunno their names the booklet doesnt name them.
Whats your thoughts on the season this year? Heavy light not as cold
@@Parabola_PJ awesome my friend! I have done a few belt swap videos. More to come. I did them on a John Deere this past summer as well. I’m going to consult my meteorologist neighbor. So far all signs are pointing to heavy snowfall. Unsure of temps at the moment.
@@GarageGear haha oh God 😅 😆
@@Parabola_PJ we’ll see what happens!
Just checked out the ARMORskids. Did you have to replace the skids carriage bolts to fit the new skids?
No need to replace the bolts unless they are really beat up. I used the same ones. Fit just fine. 👍
@@GarageGear Good. I’m going to place an order then. I read something about the possibility of needed spacers but I guess I will find out.
@@fingerlakeslawn depending on certain models you may need them but my guess is you probably won’t!
JB.....Castle Rock, Colorado just passed the same restrictive ordinance against having lawns as Aurora, where I live. The drought is serious here. I can cut a 500 sq. ft. lawn with the old rotary push mower, (yes JB, I still have one)😮😯😲😳 It's very "non-garage gear compliant."🤣🤣🤣🤣🤣
Wow that’s all you’re allowed to mow? That’s crazy! I may do a video on a push mower though come the spring! Lol! If it goes in the garage it’s compliant lol! 👍
I prefer sea Foam vs. Sta-Bl
Thanks for sharing Mike!
what Engine did you put on that old Iron Ariens Snow Blower? It looks different from the one that was on there in previous videos.
Hey Northernflyer! I installed a predator 212cc engine on it! Here is a link to that video! BEFORE YOU INSTALL A PREDATOR 212CC ENGINE ON A SNOWBLOWER, WATCH THIS!
th-cam.com/video/hj6XJ6MSqN0/w-d-xo.html thanks for watching!
Good day. how would you lube the augers if they have no grease zerk fittings? Remove the shear bolt and try to just spray wd40 or white lithium grease in behind?
Hey Billy! I’ll be doing a video on this in the coming weeks. Yes you could remove the shear pins and spray some white lithium grease behind them. Wd40 will work too but not last as long. Thanks for watching!
Just bagged an old craftsman 11hp tecumseh 30inch from a scrapyard for free👌 new carb and belts, got er running and functioning perfect, now its time for paint
Awesome Jakk! You’ll have her all pretty before the season starts! Thanks for watching!
Wery good check list, No auger belt snap in summertime
Haha I never had one snap in the summer! 😉
My point was that it is better to change the auger belt in summertime than in a Middle of first snow storm
@@kjell-richardlvdal373 oh I see! Yes summer is the perfect time to do some maintenance on your snowblower! 👍
Do you think it’s better to buy an Ariens blower at Lowe’s or go to a Dealer?
Dealer cause there assemble correctly and they know more stuff if u know what you want and how to assemble it go to lowes
@@NickB-zf5rh I know that I want the Ariens 24 Deluxe. Assembly wise not sure but I could figure it out lol.
Great point made by Nick! If you’re capable of assembling it correctly the go to lowes. If not check out a dealer! 👍
@@GarageGear How hard is the assembly?
@@fingerlakeslawn not hard. Mostly nuts and bolts. I did one in a video called how to make your snowblower last a lifetime. Check it out! Most assemblies are the same.
Dumb question but where is the air filter? I have the ariens with Briggs and Stratton 11.5 and can’t find it lol
Hey sideways! No air filters on snowblowers. They would freeze up and prevent air from getting though. Thanks for watching!
@@GarageGear welp that would make sense . In my excuse I’m originally from Fl lol we didn’t have them down there . Thank you!!! Love all your videos!!
@@sideways8films488 you could toss sand with them down there though lol! Thanks for being a cool fan sideways !
I got two Hondas. If one breaks I got another lol. Easy enough😊
Lucky you my friend! I would love to have a Honda! How old are they?
@@GarageGear 35. I traded my ariens deluxe 28 inch sho after 6 years of use for a nearly new Honda hss928 wheeled model. Paid $1200 for it 6 years ago. Kept it in mint shape and sold it for $1200. Used the remaining cash towards a Honda 928 wheels. Than I got a 1332 track Honda for $895 at a Honda dealer in near mint condition. Made in Japan
@@appleztooranges WOW! Outstanding my friend! Very cool!
@@GarageGear you think Honda is better than ariens? Quality wise?
@@appleztooranges that’s a great question! In terms of the engine Honda wins hands down! I’d say in terms of the frames they’re probably neck and neck. Both models are built to last! Your thoughts?
Where did you find ethanol free fuel for 2.99 ?
That was an old photo lol! Thanks for watching!
your videos will save me $1000s in the long run thanks so much!
You got it my friend! 👍
2.90 for ethanol free LOL Where is that station? LOL Oh I get it TIME TRAVEL !
Hey Tempus! I wish those were the prices too my friend! About $4 a gallon here! How about you?
Hi, Just found your channel and watched the auger grease video. Nice. Could use some tips/advice. I have a 20+ yr old Craftsman 29", 2 stage, 9hp. Chassis Mod# (536.887990) I take very good care of it but the controls are troublesome. The cable ends at the handles/controls fail almost every year. Do you have any good fixes or upgrades? TY!
I Cochran! Here’s an idea! Why if you cut the cables short and somehow link some steel cable (1/4 inch thick) that you could get at Home Depot and link that to your cable and handle! It would be more durable! Perhaps hold up better. Did something similar on a mower and it lasted 17 years lol! Let me know if this could work in your situation.
@@GarageGear I'll try something like that out. Thx for the idea.
@@Cochran05 ROCK ON bud! Let me know how it works for you!
Are you on IG? I’m sharing your videos on IG my friend
Garagegearjb on IG! Appreciate you sharing the videos my friend!
HOW DO I REMOVE A SEIZED WHEEL?
Hey Alan, I have taken a torch to them before. Heated them up and immediately after poured ice cold water on them to break them free. This has worked for me 2-3 times. Sometimes letting them soak with pb blaster over night then giving them a solid thud with a hammer can help too. Thanks for watching.
It's now illegal to sell ethanol free gas in Canada. Boo.
Seriously why is that? Thanks for sharing
Funny, most marina's pump ethanol free. Also look at the pump, usually the "high test" is ethanol free. I'm in Alberta and my regular go to station still has ethanol free high test. That's all I ever burned in my boats in Ontario.
@@klr650ryder thanks for sharing Wayne! Appreciate it! 👍