How to Replace Inner Tie Rod 2000-2005 Buick LeSabre

Buy Now!
New Tie Rod from 1AAuto.com 1aau.to/ic/1AST...
This video shows you how to replace the inner tie rods on your 2000-2005 Buick LeSabre.The inner tie rod has a ball joint that can wear over time, causing a clunking noise, loose steering, and eventually, other problems with the wheel and suspension components. It’s a good idea to replace your inner tie rods as soon as you notice any of these symptoms.
This process should be similar on the following vehicles:
2000 Buick LeSabre
2001 Buick LeSabre
2002 Buick LeSabre
2003 Buick LeSabre
2004 Buick LeSabre
2005 Buick LeSabre
Tools you will need:
• Pry Bar 1aau.to/oa/1AXA...
• 22mm Wrench
• 19mm Socket 1aau.to/oc/1AXA...
• 22mm Socket 1aau.to/oa/1AXA...
• Inner Tie Rod Removal Tool 1aau.to/oa/1AXA...
• Locking Pliers 1aau.to/oa/1AXA...
• Needle nose pliers 1aau.to/oa/1AXA...
• Needle nose pliers 1aau.to/oa/1AXA...
• 3/4 Inch Drive Ratchet
• Torque Wrench 1aau.to/oc/1AXA...
• Copper Anti-Seize
• Gloves 1aau.to/oc/1AXS...
• Safety Glasses 1aau.to/oc/1AXA...
• Hammer 1aau.to/ob/1AXA...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@robertshaff2967]

Counting rotation doesn't always work, replacement parts are sometimes different lengths.
I always measure.

[@willietolliver8086]

Thank you for showing me I look through two or three when you get ready to post something just post it on my neck man so I can see that's helped my son out a lot they showed me to 2 what it look like when you post your send it to WT

[@julianosterhaus4694]

Plastic tubing covering ball area at 5:15 was knocked off but you never put it back on. Why?

[@Squiidgy]

did he say to hop in the passenger seat

[@eduardocervantes6049]

good video, you make it look easy, thank you

[@knucklestheechidna5718]

I got a kit with inner and outer. I plan to just leave the outer tie rods attached, and remove the inners, then take my new set and make them the same length as the original assembly.

[@FLSTN1]

Awesome video. Thank you for your time and help Sir....

[@bassb450]

Would a 2000-2005 Deville be the same method? I think it is the same suspension and frame? Also what size is the actual nut. I know you used a u clamp but not every body has that.

[@juan2049]

6:35 do you need to reinstall that piece with the new inner tie rod?

[@bassb450]

dfwe

[@sgmmgs2166]

I have done this 3 times already and every single time time the new tierod end keeps having play in the bearing part? Why?