【中文ENG】IMOU Cruiser 2 摄像头新 SD卡 New SD card / Memory card
ฝัง
- เผยแพร่เมื่อ 7 ม.ค. 2025
- 本视频仅供个人参考。
This video is for personal reference only. All images are for illustration purposes only.
1. 摄像头无法读取SD卡。
2. 新SD卡替换旧卡。
--------------------------------------------------
【IMOU Cruiser 2】
以下是摄像头设置新SD卡的逐步指南：
1.关闭电源：确保摄像头完全断电。
2. 更换SD卡：取出旧的SD卡，插入新的SD卡。
3. 重新连接电源：等待大约3分钟，直到摄像头重新启动。
4. 重置相机：
按住重置按钮5到10秒，直到听到提示音。
设备指示灯会开始缓慢闪烁绿色。
5. 等待3分钟：重置后等待摄像头稳定。
6. 扫描二维码：使用手机扫描二维码，将摄像头添 加到你的账户中。
7. 确认成功添加：几分钟后，你应该能在账户中看到摄像头图标。
8. 检查SD卡图标：
如果未显示SD卡图标，说明SD卡未检测到。
取出SD卡并重新插入，然后重复之前的步骤。
9.格式化SD卡：
点击SD卡图标。
进入“Device Details”，点击 DELETE 删除（FORMAT 这将格式化SD卡）。
10.设置定时录像：
在“Device Details”中，进入Local Storage - 在 Scheduled Recording 定时录像，设置录制计划。
-------------------------------------------------------
【IMOU Cruiser 2】
This video is for personal reference only. All images are for illustration purposes only.
Here's a step-by-step guide to setting up your camera with a new SD card:
1) Turn off the power: Ensure the camera is completely powered off.
2) Replace the SD Card: Take out the old SD card and insert the new one.
3) Reconnect the camera to power: Wait about 3 minutes for the camera to power up.
4) Reset the camera:
Press and hold the reset button for 5-10 seconds until you hear a beep.
The device indicator light should start flashing green slowly.
5) Wait for 3 minutes: Allow the camera to stabilize after the reset.
6) Scan the QR code: Use your phone to scan the QR code, adding the camera to your account.
7) Confirm successful setup: After a few minutes, you should see the camera icon in your account.
8) Check SD card icon:
If the SD card icon does not show up, it means the SD card is not detected.
Take out the SD card and reinsert it, then repeat the previous steps.
9) Format the SD card:
Press the SD card icon.
Go to "Device Details" and click DELETE (this will format the SD card).
Set up scheduled recording:
10) In "Device Details," navigate to Local Storage - Scheduled Recording to manage your recording settings.
