Yunzi honestly got this Thang on lock, started my ride with gk61, bought aftermarket stabs, lubed the stabs, lubed switches (glorious pandas), and put foam in the case and it sounds phenomenal... Bought a everglide 75 off of Yunzii's site, slapped some coffee chip switches in, put some clear keycaps from drop, and maybe put some dialectic grease on the stabs and it's easily my favorite keyboard now. Don't get me wrong the gk61 has a special place in my heart and sounds great, but yunzii is like plug and play to the max
I have the gmk67 from Zouya and it is the exact same keyboard, it is still a great value when added up. My build has a cheap set of keycaps and the ktt haluhalo switches and all in all it cost just under $100. Which is more than this budget killer, but if you bought cheaper switches like the cream yellows then the cost is practically the same. Along with the fact that this set would be less work since it is already lubed.
Based on the angle of your camera, it seems that your unit has the same issue as mine, which is a slight warp on the bottom part of the case. Im not sure if this is unique to the EK68 since i haven't seen the Gmk67 having this issue. Im still looking for an effective way to fix this on my board.
EK68 looks, sounds, feels good. But the VIA cutdown software allows for only 1 Fn layer which is too limiting. Plus F key shortcuts dont work on Linux, but do on Windows. I'm making my own PCB to replace this one with a beefy MCU for full QMK goodness on this hardware.
for anyone wanting a barebones version, just get the gmk67 its the same board theres no difference
The plate is different. GMK67 has PC plate and EK68 has steel plate. PC is usually more thocky, while steel is clacky
there is also a variant of the ek68 with via support
Yunzi honestly got this Thang on lock, started my ride with gk61, bought aftermarket stabs, lubed the stabs, lubed switches (glorious pandas), and put foam in the case and it sounds phenomenal... Bought a everglide 75 off of Yunzii's site, slapped some coffee chip switches in, put some clear keycaps from drop, and maybe put some dialectic grease on the stabs and it's easily my favorite keyboard now. Don't get me wrong the gk61 has a special place in my heart and sounds great, but yunzii is like plug and play to the max
I have the gmk67 from Zouya and it is the exact same keyboard, it is still a great value when added up. My build has a cheap set of keycaps and the ktt haluhalo switches and all in all it cost just under $100. Which is more than this budget killer, but if you bought cheaper switches like the cream yellows then the cost is practically the same. Along with the fact that this set would be less work since it is already lubed.
is the software good? my rk61 doesn't really allow me to set layers
just bought this board with the gateron yellow switches for $45. i'm so pumped for it to arrive.
Your content is amazing and I hope you become huge in the future (7 days) like 5 mill subs
This is a rebrand of the Zuoya GMK67.
Would recommend that over the prebuilt version unless you like the switch and keycaps of the EK68
I think the case on this looks way nicer. Would be nice if they do a barebones with the gunmetal grey
@@erwarkthey just coated it with another coating the oringal coating that the gmk67 has isnt too bad
Sound difference was enormous for just some stab lube and case foam.
You better be buying that mxrskey ck820 😂. The FR4 plate and foam finally got here for me.
GMK67 from taobao barbone with pc plate only costs 36USD.
u should do a full video on how to mod the ek68
Got one with gateron yellows and it’s perfect
I think one of the best content creator about Key Boards.
Based on the angle of your camera, it seems that your unit has the same issue as mine, which is a slight warp on the bottom part of the case. Im not sure if this is unique to the EK68 since i haven't seen the Gmk67 having this issue. Im still looking for an effective way to fix this on my board.
EK68 looks, sounds, feels good. But the VIA cutdown software allows for only 1 Fn layer which is too limiting. Plus F key shortcuts dont work on Linux, but do on Windows. I'm making my own PCB to replace this one with a beefy MCU for full QMK goodness on this hardware.
5 seconds in and i like your editing love the film grain
which one is beter this keyboard or the CIDOO V65 V2?
I think this board is the same as gmk67 which is barebone kit.
Oooo perfect I’ll take a look
Gmk67 is basically this ib barebones.. i built mine around 100 usn in total
got this for my ipad, its really good
love the vid but for some reason i hate the upstroke of those switches
i love poppy keyboards rn
yo i just got my first custom keeb today. it was for 20 bucks and thocks so hard once modded
Awesome video!
Nice video!
Were the stabilizer stems already clipped?
can i order the keyboard to germany?
What switches is it?
Would you say this board is better than the AKKO 3068B?
YES
This is Zuoya's GMK67.. Epomaker has just redone the packaging and some small stuff.. big red flag from Epomaker🚩🚩
Red flag? That's their whole business model I don't think they've ever made something entirely on their own.
is the black on the gmk67 the same as the black on this epomaker ek68
@@sabbiruddin3938 it's literally the same from Zuoya what you even mean 😭
It's an OEM keyboard. Which means anyone can use it. Epomaker just built it for us...
@@chiizuu752no the epomaker board has a differnt coating from the gmk67 but both are great
Are they pre lubed?
yes.
Spacebar is way too overlubed
🤩😍 Amazing
i dont like the high pitch clicks ! ah yuck
Npc
a