Outboards are almost indestructible. I’ve pulled them out of garages that they have been sitting for a 10 years and a little fuel and a new plug and they fire up right now. You got a great deal on that motor for sure.
it seems to me that the water coming from the pump should have been a little stronger stream. I could be wrong, and it works fine. but all and all, it sounds good.
I have a cv30. looks just like this one. Mine was pumping water but no pee stream. There is a hole under the bottom doesnt even look like an indicator outlet. yours looks plugged if you stick a drill bit in it youll get a stream!!
Hi James... Won't be long and I will be on my way there.. if you are needing me to bring you anything let me know soon.. The Clock is Ticketing.. I can barely wait... LOL
**smiles as he watches James take a second shower for the day** It's good to see that the fuel isn't all gummed up after that time. Do you know if they used some type of fuel stabilizer on the stuff in the red fuel container? Now we need to see what you are going to put that in!!!
A nice engine that runs great James. Yes always check fuel lines and everything that could be a problem before starting, so it doesn’t cause you more problems in the end. Good video, and Motmot is becoming a Jack of all trades with your teaching him.😊
Kumusta Po ? Hope you and Capps & assorted crew are having a great day . James I'm not going to say your water coming from your water pump is not correct I'm sure you already know that lmao 🤣 The mariner outboards I had had a lot stronger stream coming out from under the Cowling I guess that's where your Yamaha comes out at I'm not familiar with the Yamaha outboards only mariner & Mercury I'm sure that would be plenty big to limp back to the bank with if the diesel ever stops . Much respect to you sir Mabuhay & God Bless QUESTION == Hey Po if you had the starter Fluid spray on hand like I just seen you spray the little outboard with why Didn't you spray the Diesel with it the other day when it was being so stubborn about firing ?????
Clear your water line from the manifold to the pee hole. Probly got a bug or wasp crawl up in it. You got water coming out yor upper exhaust so your impeller pump is working. Get some good gas ASAP or you gonna be pulling a carb. 3 years is to old. Run a stabilizer in your fuel especially if you are goning to use it only for a emergency kicker. It might look good but 3 year gas gonna gum and clog your jets.
Hey James, I just Bought what I believe is a 25hp Yamaha enduro. The decals are missing from the cowling. Model number E25A. I'm not sure how it made its way to South Alabama. are parts still available for these?
James the cooling systems not cooling. 1. Maybe not enough water to fill in bucket. Needs to come up to intake on bottom near the plate. 2. Impeller is sitting so long, its not werking, it gets brittle and can always be permanently bent and like an old pair if windshield wipers, not werking good. 3. This is the very worse common problem with saltwater use outboards and ive had a lot of Yamaha. The water not coming or pissing out from the engine, do not run must check the impeller, check. The tubing going to cylinder head, check. The hole pluged at exit of pee hole or tubing to the per hole. Last and verry worse is the cylinder head cooling passageways are full of salt. Youll have to split the top end and rod out the passageways. Ive done it. Takes a little time. When they put away wet with salt water use it happens. You may not have seen from his videos not werking and he didnt say. But they not werking now. I always glush my motors with Saltaway
Pumping water fine. I have ran it even a hour at a time with staying nice,cool and steadily pumping water. The pee hole peeing. Of course when I first cranked it there it needed to blow some air and trash out.
it seems to me that the water coming from the pump should have been a little stronger stream. I could be wrong, and it works fine. but all and all, it sounds good.
Macmac is all around ,he knows almost everything keep it up Macmac,best teacher you have.
Mike Mike
@@albertthedogeinstein7983 xcbhgfzeryio
James, you may need to check the water pump impeller because I notice no water was weeping out of the engine
Can't wait to see your first trip out to sea.
Me neither
We have ignition… great little outboard motor 👏🏻👏🏻
I can remember when a 25 hp outboard was considered huge,
You need check the pomp water. The barril of water is very down, and the pomp isn't work. Be careful with the enging temp.
Outboards are almost indestructible. I’ve pulled them out of garages that they have been sitting for a 10 years and a little fuel and a new plug and they fire up right now. You got a great deal on that motor for sure.
Nice work, a little ether and vroom. I noticed other commenters on the water flow coming out of the motor, i agree, should be a steady stream.
Sounded like my old 250 Yamaha Enduro dirt bike when it started
She's a runner! Sure is a relief when a mothballed engine pops off.
it seems to me that the water coming from the pump should have been a little stronger stream. I could be wrong, and it works fine. but all and all, it sounds good.
I like your style James but you we’re making my eyes hurt looking for the spark 😂
I have a cv30. looks just like this one. Mine was pumping water but no pee stream. There is a hole under the bottom doesnt even look like an indicator outlet. yours looks plugged if you stick a drill bit in it youll get a stream!!
Hi James...
Won't be long and I will be on my way there.. if you are needing me to bring you anything let me know soon.. The Clock is Ticketing.. I can barely wait... LOL
Good Morning from KISS...Mr. James.... perfect size engine for your Big Boat....🤭
Macmac, stick around to james you have been learning a lot from him and an assets for you homeboy !!!
**smiles as he watches James take a second shower for the day** It's good to see that the fuel isn't all gummed up after that time. Do you know if they used some type of fuel stabilizer on the stuff in the red fuel container? Now we need to see what you are going to put that in!!!
There was no they it was just me and no stabilizer. The fuel is not alcohol laden junk like USA has been for years
A nice engine that runs great James. Yes always check fuel lines and everything that could be a problem before starting, so it doesn’t cause you more problems in the end. Good video, and Motmot is becoming a Jack of all trades with your teaching him.😊
I thought I heard something slapping around in there @9:39, was it the impeller ?
Woo Doggie’s!!❤😊
Sprays Either, "what's that" lol
Kumusta Po ? Hope you and Capps & assorted crew are having a great day .
James I'm not going to say your water coming from your water pump is not correct I'm sure you already know that lmao 🤣
The mariner outboards I had had a lot stronger stream coming out from under the
Cowling I guess that's where your Yamaha comes out at I'm not familiar with the Yamaha outboards only mariner & Mercury
I'm sure that would be plenty big to limp back to the bank with if the diesel ever stops . Much respect to you sir Mabuhay & God Bless QUESTION == Hey Po if you had the starter Fluid spray on hand like I just seen you spray the little outboard with why
Didn't you spray the Diesel with it the other day when it was being so stubborn about firing ?????
Clear your water line from the manifold to the pee hole. Probly got a bug or wasp crawl up in it. You got water coming out yor upper exhaust so your impeller pump is working. Get some good gas ASAP or you gonna be pulling a carb. 3 years is to old. Run a stabilizer in your fuel especially if you are goning to use it only for a emergency kicker. It might look good but 3 year gas gonna gum and clog your jets.
gas here dont spoil like back home in the USA. It is like it use to be in the USA years ago none the less I will be replacing it
Brother you got no water coming out. It's either clogged or impeller broke
You should have steady stream coming out constantly
Hey James, I just Bought what I believe is a 25hp Yamaha enduro. The decals are missing from the cowling. Model number E25A. I'm not sure how it made its way to South Alabama. are parts still available for these?
Yes that is the Enduro- yes parts are available. Write me a email to Jamesray080808@gmail.com and I will send you the pdf manual to that motor.
Where are you planning to use that engine. Considering you haven’t used it for 4 years, just interested in where is will be put to use.😁
James the cooling systems not cooling. 1. Maybe not enough water to fill in bucket. Needs to come up to intake on bottom near the plate.
2. Impeller is sitting so long, its not werking, it gets brittle and can always be permanently bent and like an old pair if windshield wipers, not werking good.
3. This is the very worse common problem with saltwater use outboards and ive had a lot of Yamaha. The water not coming or pissing out from the engine, do not run must check the impeller, check. The tubing going to cylinder head, check. The hole pluged at exit of pee hole or tubing to the per hole.
Last and verry worse is the cylinder head cooling passageways are full of salt. Youll have to split the top end and rod out the passageways. Ive done it. Takes a little time. When they put away wet with salt water use it happens. You may not have seen from his videos not werking and he didnt say. But they not werking now. I always glush my motors with Saltaway
Pumping water fine. I have ran it even a hour at a time with staying nice,cool and steadily pumping water. The pee hole peeing. Of course when I first cranked it there it needed to blow some air and trash out.
@@TexasFilipino great only because on the video I could not see it.
Seems like it doesn’t sound smooth running.
Whatyear engine is this?
I bought one, I love it! 👤🖤💯
Some day I just may teach you about marine engines
it seems to me that the water coming from the pump should have been a little stronger stream. I could be wrong, and it works fine. but all and all, it sounds good.