That was one of the better how to videos I have seen. Straight forward, to the point, good video supporting the what’s being said on the audio. Well done.
I used to have a 1998 Ford Contour. I taken out the headlights to replaced the light bulbs. It was held by 3 screws and I used Phillips screw driver to take them out.
Not sure I would describe the headlamps as being easy to take out. You have to take the front cladding off in order to take out a darned headlight. It is the dumbest idea ever! My other car is a Volvo and removing a headlight takes about 2 minutes. My local Ford dealer wanted almost $1000 to replace my HID bulbs and high beam bulbs. Almost $500 in labour!!!!!
To be fair, this is to replace the headlamp ASSEMBLY. You can replace the headlight LAMPS in a couple of minutes by removing a single rubber cap over each lamp.
I just want to change the low beam bulb out. Can't fully squeeze my hand in there so I either need to do this or remove the windshield fluid reservoir to get to it... I would rather not take half the body apart just to change a bulb lol. wtf
I changed my headlight assembly on my 2017 and went through the wheel well to get access to the lower 3rd bolt. What a PITA
That was one of the better how to videos I have seen. Straight forward, to the point, good video supporting the what’s being said on the audio. Well done.
Thanks for the positive review!
Great work. Getting ready to change my headlight lenses, and this is exactly what I needed to get the headlights off. 👍
Do you not have to remove the full bumper to get to last screw at side of bumper?
how do i just replace the low beam HID lamp only ? 2014 Escape Titanium
After this I will never buy a Ford again. This is almost as bad as changing the battery on the damn thing
Agree 1,000%!!! I have A 2013 titanium and one low beam bid flickers occasionally and then goes out after 20 minutes. They wanted $650 to replace it.
#righttorepair
Thanks for the video, man taking those things out is a pain😑
Great how to video. Do you have a video showing how to replace windshield reservoir on 2016 Ford Escape.
Thanks John
Is it not enough to remove the wheel arch to get access to this last headlight bolt?
The bumper cover is the primary object that's covering the side headlamp bolt.
good video thanks. shame on Ford for doing this.🙄
Trent Friend right?!
What a crap design, thanks Ford!
#righttorepair
I used to have a 1998 Ford Contour. I taken out the headlights to replaced the light bulbs. It was held by 3 screws and I used Phillips screw driver to take them out.
Hi can you tell me how to remove the engine of 2015 ford escape thanks
John Anderson 😂 I’m not a mechanic, only Autobody.
@@Theautobodyguy ok thanks
How to replace a headlight on the driver side of a 2016 Ford Escape
Joseph Goode exactly the same as the video but on the drivers side
Not sure I would describe the headlamps as being easy to take out. You have to take the front cladding off in order to take out a darned headlight. It is the dumbest idea ever! My other car is a Volvo and removing a headlight takes about 2 minutes. My local Ford dealer wanted almost $1000 to replace my HID bulbs and high beam bulbs. Almost $500 in labour!!!!!
Craziness
To be fair, this is to replace the headlamp ASSEMBLY. You can replace the headlight LAMPS in a couple of minutes by removing a single rubber cap over each lamp.
Ridiculous process to change the bulb and who has the ford exclusive tools to perform the work
Right?! Not a great design
Yeah missin a whole bunch of steps
Yeah, yeah.. I try to just catch the heavy hitter items and keep them brief and to the point. Thanks for the input! ROCK ON
You moved around a lot while talking and would be nice to show the process step by step. Otherwise, a helpful video to see what all this looks like.
Thanks for the tip
I just want to change the low beam bulb out. Can't fully squeeze my hand in there so I either need to do this or remove the windshield fluid reservoir to get to it... I would rather not take half the body apart just to change a bulb lol. wtf
You are correct it’s a complete hassle to change a bulb
Ford does this so people will give up and take it to Ford service department!
The headlight build cord fell inside the headlight lens..i guess I have to remove lens?
Not even close to all the work u got to do. I just did my 2014 escape. U left out alot of information that's needed to finish the job.
Wrong title . It’s headlamp not headlight. :)
Another after the fact guy. Move on.