Being a professional machinist/foreman for 30 years now retired I was thinking of getting back into the game with a small lathe and vertical mill in my large garage/shop. I have been hunting some videos and reviews on various medium size lathes and came across your video. This is a very good review in my opinion and has helped me narrow down the featured lathe I am looking for in this particular size category. So yes, in my professional opinion, Matthew’s has chosen very well in partnering with you as evidenced from your outstanding video. Take care!
I purchased the PM1340-GT lathe about 2 yrs ago and LOVE it. Gets used regularly. One trick I learned long ago for tightening Jacobs-style scroll chucks is to go around and tighten all three key locations. You find that tightening only one location places an off-center strain on the chuck scroll. This can lead to drill bits spinning in the chuck when drilling metal. The same procedure is recommended for tightening material in the lathe three jaw scroll-chuck. You get better alignment, and holds the material more positively to prevent loosening or spinning, without using excessive force on the tightening key.
This guy talked me into buying a PM-1440BV lathe. Questions that I have had are serviced quicker by these people than any other source. Twice now on Sundays I sent an e-mail with questions and received answers on Sunday. With this kind of service and attitude these people will be my source for all machine tools.
I'm 17 and currently in a vocational school for precision machining. I'm also job shadowing at a local gun Smith shop. Hopefully one day I'll have my own.
Man at 17 i was chasing tail, smoking weed and going away to college, now at 40 still paying off my 100 stack loans and wish i listened to my dad who was a bad ass machinist and model maker for the navy., im growing into loving machinist trade so much in the last cpl years. i really could kick myself for not getting into it when i was a kid. still learned a ton from my old man, that and us germans,there something in our genes thatt draws us towards tools and measurements i really think.
Gavin, not sure if you read these, I know how busy you are... but I took delivery of my PM1440GT today. I'm so excited! and greatful for all you do. You have been a true inspiration in reloading, machining and gunsmithing. I retired from a 34 year IT career last month and have started Indian Creek Armory LLC, an 07 FFL/02 SOT business in Oxford OHIO. Thanks again- I can't wait to uncrate this beast and make some chips fly. PS. I just sent a note to Matt and John at Precision Matthews letting them know it was totally because of you that I decided on this machine (vs that other brand named after some kind of bear.) Have an awesome day.
Hi Gaven. I literally just bought a LD1340GHE lathe after doing a LOT of research and after watching this video. It is a Liang Dei made in Taiwan. I believe the PM lathe is made in the same factory. My lathe has most of the features your has but mine only has a 40mm through bore. Yours is the next level. I didn't need that precision. I learned a lot from your video. They don't supply a lot of information when you buy the lathe. They assume you know how to drive one. I'm looking forward to learning more from you. Cheers from Aussie.
Hi and thank you. I just bought his little brother Al-960B 305x925, I can't be any happier. I am 65 years old and anthill now I have only pinch learning lathe from workshop to workshop on different machines.
If you Google precision Matthew's, after the adds, and after precision Matthew's own home page this is the first search result. Gavin, I think that you are winning the internet.
I purchased a PM-1236 lathe and PM-949 mill from Mat about 10 years ago when I retired. I've made hundreds of of precision gauge plugs for airgun bench rest on the lathe. I ordered both with 3 phase 220v motors and run them with Huanyang VFD's. The preferred equipment option is highly recommended. Both machines have been flawless with no issues to report.
well it's a lathe th-cam.com/users/postUgkxN9zrzkkhnjUF5PQbuA_B1gYdsfCu9k6z but it wasn't what i would have anticipated. Headstock, tailstock, carriage apron are manufactured from aluminum now not cast iron. The spindle diameter for the bearings is too small allowing for a few play in the spindle so I am using some blue Loctite to take out the play.
Good morning sir. Thank you for the video. One thing I appreciate is that you made your accessories and holders. Yes you could purchase them, but the more work you perform, the better your skill. You obviously understand this well. You can also create tools to meet your exact needs. Well done.
Looking for something else on this rainy morning and found you. I must say you are amazing, Sir. Your video editing and clarity is head and shoulders of most on youtube. I am 70, retired and bought a Grizzly G0824 a couple of years ago and have been thoroughly happy with my purchase too. I am just a beginner metal worker so I will not comment on the equipment. What I am most impressed with beyond your machining and video skills is your ability to keep your lathe clean!
Thank you for the demonstration. My PM1440 is scheduled to arrive mid next month. Your enthusiasm for this lathe has played a large part in my decision to purchase the PM1440.
Which version did you get?.. The 1440 GT in this video is the ultra high precision unit but is a step up in precision and cost it looks like compared to the PM 1440 LB
One of the MOST informative videos regarding lathes and accessories I have watched. I can't wait to go make some of those holders and using the tips I learned from your video. 10/10! Thanks!
I am shopping right now for my 1st lathe. Almost sold on the G0776 then started looking at PM 1236 PEP. Now I am even starting to convince myself on the PM 1440 GT.
Absolutely excellent demonstration and the most in depth review of this lathe. Thank you. Changed my mind over the Grizzly GO824 with the accessories PM sells. Hope to get one soon!
Awesome video. I have the little brother to this. The PM-1340GT. I've upgraded the motor and control system so I have the ability to run down to near zero RPM for threading. Have had this lathe for 2-1/2 years and love it. I also have their PM-940M-CNC mill. Also a nice machine.
I also purchased the 1340GT about 8 months ago and love it! No regrets. Also have the PM-45CNC and will be upgrading the steppers to ClearPath servos very soon. Great machine.
@@Ultimatereloader I am a retired PE based in Oregon After emigrated from the UK some 12 years after graduating Mechanical Engineering in the UK. Similar to yourself, I got to do 6 months of training on lathes/mills and welding at the start of University training. I have never stopped using those skills in my hobbies, even though as an engineer I never got to touch a tool in my professional life. Funny how the need to do stuff with one's hands never leaves you. This will be my first "high end" machine..:)
Fantastic review, you convinced me, I've ordered the same model equivalent here in Australia as Liang Dei 1440ET, only difference RHD carriage wheel, metric lead screws, 240v 50hz power.
Great review. I picked up a PM-1236T lathe and a PM-835S mill as my first machines setting up a hobby shop in my garage. I've been very pleased with both and highly recommend Precision Matthews!
Fantastic video. I've been interested in learning machining for several years. I have been trying my hand in this for a few years as well, making small parts and tools. I really want to move to the next level by learning the proper way to use lathes and mills. Am really looking forward to your next series. Thanks/
excellent series i've always hope someone on youtube would do something like this for people who would like to get into gunsmithing and chamber their own barrels, etc. Not much info around the internet
I’m actually impressed with that little Lathe. I regularly use a Monarch Model K and 10EE for precision work at the shop. It’s really starting to make the home shop idea pretty attainable.
I have ran two different branded lathes that are the same casting design and got to say I love them for doing small delicate work. Hopefully will get a chance to use a PM someday.
Looks like a really high-value unit for $9k. A lathe like the PM-1440GT is on my wishlist for setting up my post-retirement gunsmith shop. Keep up the great work!
This hobby is addictive and constantly requires another gizmo. I've got the PM1440HD that I've had for several years. Very sturdy machine weighing in at about 2600#s with its cast iron base. Plenty of power, I'm on 3 phase. I'd like to have the bigger bore but mine came with the D1-4 spindle. In addition to the nice accessory kit I got the taper attachment and the collet chuck with a set of collets from PM. The collet chuck is very nice but is the type that requires considerable turning to close on a different collet. I do repair work on mostly metric equipment so often need to change the gears, kind of a PIA. I do a lot of turning between centers so I can take the work off and trial fit. I've gone to straight-in threading, works fine . No fooling around with two adjustments. I've got a Shars (Deckel knock off) single point tool grinder and I've found that I can regrind carbide inserts for both the lathe and mill. 2 & 4 flute end mills both HSS & carbide can be easily end sharpened. Been playing around making gears with a 8" rotary table, time consuming! As it turns out the lathe is just a minor part of this entire scheme.
Heck, one can't buy what one wants now days. You have to make it. I went to the site which makes these machines while you were demonstrating your lathe. Wonderful tools. You mention that you machine rifle barrels; I saw the taper attachment which was very nice.
I am currently taking a course in gunsmithing and we are dealing with the lathe and milling for this course. You video put into perspective all of the pictures and text that I have read. Keeping in mind that I have no machining experience. It put a visual to the text and was kind of the ah ha moment. It also addressed another concern in terms of tolerances. I get the idea that you want to have the best equipment you can afford, but I can't afford the best equipment. This seems like a great alternative for the small business gunsmith. I subscribe and will be watching your other videos. Nice.
Gavin, thank you for the in depth review and info on the PM1440 GT. I purchased this exact lathe and PM14x49 mill a couple of years ago for hobby machining. The alignment features were great and hope you can cover oil changes on the lathe in the future. Best regards, Luis
Great video! You are answering so many questions I've had for a long time. Fantastic setup and manufacturing or your own tools. Looking forward to watching the fundamentals videos!
Very nice Gavin well-organized. I was a Millwright shop lead man and I love to organize and I had people laughing at me. But when we needed a part and the lines are down we could go right where we kept them and get things back going. We made aluminum beverage cans at 2000 cans per minute they did not like to see the machines stopped.
I love the video! I am a gunsmith and I recently bought the PM 1340 GT. I would love to see a video on how you installed the DRO. I am looking to pick up a PM mill in the near future, so your videos are a great resource, thank you!
I’m looking to get my first lathe. Zero lathe experience. Trying to decide if I want to start small with something like a 10x22 or jump right in with something like the G4003G or PM1236. Edit: I ended up finding a used ENCO 12x40 Gearhead from a local machine shop. 3.2 hp 3 phase motor. Excited to get it up and running.
Great review. I've had my PM1340GT lathe for about 5 years now and still love running it every time, the PM1440GT was not available yet when I purchased mine but still haven't been up against the work envelope yet although I've been close a couple of times. You are right about Matt, he is great to deal with and very hands on. Love the custom touches, that was one of the first things I did to mine as well was to add custom accessories to make it my own and tailored to my use. Mike
I know it’s a 2 year old comment but maybe you’ll see this, how often do you find the 1340s 1-9/16” bore restricts you and this 1440 with the 2” spindle bore would have worked?
@@omgwtfits7612 personally I have not encountered anywhere that the 1-9/16" through bore has been a restriction. Would a 2" bore be better? Absolutely, but I have not been unable to machine what I've needed to on my PM1340GT. Hope that is helpful. Mike
I love the videos about this lathe. Joe Updike from Accurate Rifle Systems and Robert Waggoner from Alamo Precision recommended it. It looks like I'll be pleased with a great gunsmithing lathe.
gavintoobe, I appreciate the time you took in coordination with Precision Matthews to put this very detailed vid together. I have been in contact with Matt at PM, but on the fence between the PM1440E-LB and the 1340GT. Not exactly the same as what you are showing but from what I see, minuscule differences in some size areas - and nothing more. Based on your vid, I will be taking a closer look before I purchase the China made lathe. Thx.
Yes, sir I will. I am waiting for the check to arrive from my bank, I'll deposit and turn around in a cashiers check to PM. Have been corresponding with Nicole there regarding pre-shipping inspection of both machines. The response and willingness to work with customers is refreshing in todays' society. It'll be about 90-days before they will arrive. The machines will travel to Seattle, then on Alaska Marine Lines for shipping to Western Alaska via oceangoing barge. I will have my shop ready for them, and the electrician will be kept up to date so once they're here he can wire my place quickly. I bought the 3-phase 1440GT so I can use a VFD. Your set-up looks ideal regarding collets and workholding. I bought another rollaway toolchest just for this occasion. Really looking forward to this. :) @@Ultimatereloader
Hey Gavin, like I said three months ago; it'd be 90-days. Should be here by next week. Will be a big deal getting them into my shop. Not impossible, but tough. @@Ultimatereloader
THANK YOU SO MUCH. I spotted PM tools about a year ago. I was gonna drive up this summer and look them over because, honestly, for less than the cost of a used car I can equip a "complete" shop with their stuff. But IS it any good? I'm a hobbyist, not a production shop, but after seeing these in action I know I could run them every day and they'll last longer than will. You videos saved me a nasty drive up to Pittsburgh. THANK YOU. KEEP DOING IT.
I really like this lathe. I am busy looking at buying my first lathe and Milling machine. However here in South Africa, I don't think this machine is available. Everything is super pricy here as well. Well that been said I still like the PM Lathe. Thank you for the demo. I liked it.
Amazing video! I usually just watch your content for the firearms and reloading stuff but this is really awesome and making me wish I had a lathe too haha. I’m studying Mechanical Engineering right now and this is just plain fun to see principles put into real life practice. Keep it up!
Would I be crazy to get into a 1340GT as a first lathe? I have no experience with machining, but have said to myself "If only I had a lathe" hundreds of times. It is quite a hefty investment, but I don't want a machine that I will outgrow in a few years, and there is always money to be made with the proper equipment. Appreciate the quality of the video.
Really enjoyed the video, one thing entered my mind, keeping collet out in the open in trays makes them susceptible to dust imo, I keep mine in a toolbox drawer. Just wondered if my concern is over thinking things
@gavintoobe Thank you so much for this Video! I just found this Video, and am now a Subscriber. This Video alone is worth it's weight in gold for someone looking to getting into Manual Lathe work. I am a Welder/Fabricator, and I have been biten by the Machining Bug very badly. I've always been interested, but never had time to go to school to learn this, now with the Technology available today a person is actually able to learn Machining, manual as well as CNC from the comfort of their home, when they have the time available, thanks to youtube, Instagram, etc, because of Guys like you, Titan Gilroy, and many others. I am so glad to hear you say that you have put together a complete educational video series for Manual Lathe & Mill. I have been looking for quite some time for somebody to have this exact series. I have been on the hunt for my first Lathe and Mill. The problem with most used Lathes is they are beat to hell. Lately, I have been seriously considering purchasing a Precision Matthews. Now you have convinced me. As far as a Mill goes, I think I am gonna exercise my patience and hold out until I find a Bridgeport in really good condition for a fair price. I will be checking out all of your other Videos, and binge watching this weekend. You will probably being getting many questions from me in the future. Thanks again, and keep up the good work. Regards, Phillip Chambers
Hi. Just found this. Very nice review. I am looking for a new lathe. I’m curious - have you been able to break chips on this lathe - i.e. C’s and 6’s? I only saw birds nests in your review. What surface finishes have you achieved? Edit: that .200 cut was pretty nice. Looks like it ate that up no probs - could maybe have broken the swarf up with a slightly higher feed? Nice finish too. 👍
Good review. You are correct about the improvement of surface finish switching from a single phase to a three phase motor. The single phase motors cog, or accelerate and decelerate somewhat during rotation, and this can transfer to the workpiece when running fast, say 1:1 ratio from motor to workpiece. Also , the reversing function for metric threading on an imperial machine is much better. Have fun with your new purchase.
You are very complacent around the lathe. I read through the comments section and it looks like there are a lot of people who look up to you and are learning a lot from your videos. You should be talking about safety and also be practicing it. I know you are an excellent machinist, and you are comfortable around these machines. But when you are making videos that beginners are watching you should remember the fundamentals that you learned from whoever taught you. Sorry to nit pick, you really are a very talented and knowledgeable machinist.
nice video- great info, you should use cut foam shadow boards for the drawers with tools and tooling, its even considered a Kaizan principle within lean manufacturing / TPS
It is noteworthy that some individuals utilize lathes that are 50 to 60 years old, which are significantly less expensive than contemporary machinery, yet they consistently produce superior workmanship. The rifles crafted by these experienced gunsmiths often exhibit a higher level of accuracy compared to those produced using advanced machines like the Precision Matthews 1440GT. This observation underscores a fundamental truth in manufacturing: the quality of the output is not solely determined by the machine itself but also by the expertise and craftsmanship of the operator. Consequently, extensive investment in equipment is not always necessary to achieve exceptional results. Precision Matthews PM-14401440GT nevertheless is a wonderful piece of equipment
Very nice machine. I can see rifle barrels being cut on that machine. With the outboard spider and JGS floating reamer holder you are ready to thread and chamber. Great video!
Really like your shop looks like an awesome lathe my shop is set up in the dining room all I have is the small sieg machines I only recently found precision matthews after seeing this video I believe that they are as good as they advertise. Thanks for a great video.
Being a professional machinist/foreman for 30 years now retired I was thinking of getting back into the game with a small lathe and vertical mill in my large garage/shop. I have been hunting some videos and reviews on various medium size lathes and came across your video. This is a very good review in my opinion and has helped me narrow down the featured lathe I am looking for in this particular size category. So yes, in my professional opinion, Matthew’s has chosen very well in partnering with you as evidenced from your outstanding video. Take care!
Thank you Austin, that means a lot coming from a seasoned pro like yourself!
What other lathes were you considering?
Art from Ohio
I purchased the PM1340-GT lathe about 2 yrs ago and LOVE it. Gets used regularly.
One trick I learned long ago for tightening Jacobs-style scroll chucks is to go around and tighten all three key locations. You find that tightening only one location places an off-center strain on the chuck scroll. This can lead to drill bits spinning in the chuck when drilling metal. The same procedure is recommended for tightening material in the lathe three jaw scroll-chuck. You get better alignment, and holds the material more positively to prevent loosening or spinning, without using excessive force on the tightening key.
Thanks Jim!
This has got to be one of the sweetest set ups for a man cave lathe
This guy talked me into buying a PM-1440BV lathe. Questions that I have had are serviced quicker by these people than any other source. Twice now on Sundays I sent an e-mail with questions and received answers on Sunday. With this kind of service and attitude these people will be my source for all machine tools.
this is the most organized ,efficient and valuable video for lathe enthusiasts . thank you so much .
Stan
I'm 17 and currently in a vocational school for precision machining. I'm also job shadowing at a local gun Smith shop. Hopefully one day I'll have my own.
Happy you found your path at such a young age. I'm 56 and looking to start a gunsmithing course this summer. Good luck in your career. 🔫👍😊
Thank you!
sounds to me like youre on your way.
Man at 17 i was chasing tail, smoking weed and going away to college, now at 40 still paying off my 100 stack loans and wish i listened to my dad who was a bad ass machinist and model maker for the navy., im growing into loving machinist trade so much in the last cpl years. i really could kick myself for not getting into it when i was a kid. still learned a ton from my old man, that and us germans,there something in our genes thatt draws us towards tools and measurements i really think.
sounds like you're already on your way, when i was 17 i was pathetic.. sort of
Hard to believe this was only 3yrs ago. You’ve made huge progress in such a short period of time! Congrats
Gavin, not sure if you read these, I know how busy you are... but I took delivery of my PM1440GT today. I'm so excited! and greatful for all you do. You have been a true inspiration in reloading, machining and gunsmithing. I retired from a 34 year IT career last month and have started Indian Creek Armory LLC, an 07 FFL/02 SOT business in Oxford OHIO. Thanks again- I can't wait to uncrate this beast and make some chips fly. PS. I just sent a note to Matt and John at Precision Matthews letting them know it was totally because of you that I decided on this machine (vs that other brand named after some kind of bear.) Have an awesome day.
Excellent and thorough review young man, I am very impressed. PM did good partnering with you.
Art from Ohio
Hi Gaven.
I literally just bought a LD1340GHE lathe after doing a LOT of research and after watching this video. It is a Liang Dei made in Taiwan. I believe the PM lathe is made in the same factory. My lathe has most of the features your has but mine only has a 40mm through bore. Yours is the next level. I didn't need that precision.
I learned a lot from your video. They don't supply a lot of information when you buy the lathe. They assume you know how to drive one. I'm looking forward to learning more from you.
Cheers from Aussie.
If I was ever fortunate to own a lathe this would undoudtedly be my # 1 choice ,I would look no further.Thanks for the great in-depth walkthrough.
Thank you Rusty!
Hi and thank you. I just bought his little brother Al-960B 305x925, I can't be any happier. I am 65 years old and anthill now I have only pinch learning lathe from workshop to workshop on different machines.
If you Google precision Matthew's, after the adds, and after precision Matthew's own home page this is the first search result. Gavin, I think that you are winning the internet.
AWESOME!!!!!!
This is as good as it gets... this is just what I needed... Im sticking with you gavintoobe! You are my instructor!!!
th-cam.com/channels/pp6lgdc_XO_FZYJppaFa5w.html
I purchased a PM-1236 lathe and PM-949 mill from Mat about 10 years ago when I retired. I've made hundreds of of precision gauge plugs for airgun bench rest on the lathe. I ordered both with 3 phase 220v motors and run them with Huanyang VFD's. The preferred equipment option is highly recommended. Both machines have been flawless with no issues to report.
well it's a lathe th-cam.com/users/postUgkxN9zrzkkhnjUF5PQbuA_B1gYdsfCu9k6z but it wasn't what i would have anticipated. Headstock, tailstock, carriage apron are manufactured from aluminum now not cast iron. The spindle diameter for the bearings is too small allowing for a few play in the spindle so I am using some blue Loctite to take out the play.
That's disconcerting considering they were bragging about their casting abilities they should probably change that
This video is exactly what I needed. I have been eyeballing that lathe for a while now.
Your never too old too learn a new trade!
I'm 61 years old and going to start clambering my own competition rifles!
Thanks too the Ultimate Reloader!
I've had this same machine for several years how and it's excellent, very happy with the purchase.
Great sound, great visuals, great narration - real passion for the subject. WIN. Cheers, Bud!
It has been a long time since I have obtained this much knowledge while watching a video! Thank you sir! Great setup by the way.
Assume you got me hooked !Great job Gavin
What a nice machine. Appreciate the tour !!
Good morning sir. Thank you for the video. One thing I appreciate is that you made your accessories and holders. Yes you could purchase them, but the more work you perform, the better your skill. You obviously understand this well. You can also create tools to meet your exact needs. Well done.
Great review and demo, You can never go wrong with a PM machine from Matt, you partnered up with a winner!
Looking for something else on this rainy morning and found you. I must say you are amazing, Sir. Your video editing and clarity is head and shoulders of most on youtube. I am 70, retired and bought a Grizzly G0824 a couple of years ago and have been thoroughly happy with my purchase too. I am just a beginner metal worker so I will not comment on the equipment. What I am most impressed with beyond your machining and video skills is your ability to keep your lathe clean!
Thanks Dennis! Hope you are having fun with you lathe. What a great way to spend your time during retirement!
Thank you for the demonstration. My PM1440 is scheduled to arrive mid next month. Your enthusiasm for this lathe has played a large part in my decision to purchase the PM1440.
Which version did you get?.. The 1440 GT in this video is the ultra high precision unit but is a step up in precision and cost it looks like compared to the PM 1440 LB
GT
@@johnferguson2728 Nice
@@johnferguson2728 I just ordered mine this morning!..:)
When are you expecting delivery?
Gavin, thank you for sharing - your videos on the 1440 have answered a lot of questions. Well done video.
I like this model. will possibly order it soon.
One of the MOST informative videos regarding lathes and accessories I have watched. I can't wait to go make some of those holders and using the tips I learned from your video. 10/10! Thanks!
Thanks Joshua!!!! I had fun putting it together!
I am shopping right now for my 1st lathe. Almost sold on the G0776 then started looking at
PM 1236 PEP. Now I am even starting to convince myself on the PM 1440 GT.
Absolutely excellent demonstration and the most in depth review of this lathe. Thank you. Changed my mind over the Grizzly GO824 with the accessories PM sells. Hope to get one soon!
I think you'll like the PM-1440GT- the quality and precision is excellent, and Matt is great to deal with- he personally takes care of his customers.
@@Ultimatereloader It's interesting that Colchester advises turning the leadscrew off nless actually threading - but you can't on this PM !
Awesome video. I have the little brother to this. The PM-1340GT. I've upgraded the motor and control system so I have the ability to run down to near zero RPM for threading.
Have had this lathe for 2-1/2 years and love it. I also have their PM-940M-CNC mill. Also a nice machine.
Rad- I'm super-curious to try a PM-1340GT. I've heard they are great as well!
I also purchased the 1340GT about 8 months ago and love it! No regrets.
Also have the PM-45CNC and will be upgrading the steppers to ClearPath servos very soon. Great machine.
Okay, you got me hook, line and sinker. I’m calling Matthews tomorrow to order a lathe. Awesome video. Thank you.
Yes from comments below this video was the clincher for me.. I just ordered a GT for arrival in Jan/Feb 22.
Congrats!!!
@@Ultimatereloader I am a retired PE based in Oregon After emigrated from the UK some 12 years after graduating Mechanical Engineering in the UK. Similar to yourself, I got to do 6 months of training on lathes/mills and welding at the start of University training. I have never stopped using those skills in my hobbies, even though as an engineer I never got to touch a tool in my professional life. Funny how the need to do stuff with one's hands never leaves you. This will be my first "high end" machine..:)
Fantastic review, you convinced me, I've ordered the same model equivalent here in Australia as Liang Dei 1440ET, only difference RHD carriage wheel, metric lead screws, 240v 50hz power.
Great review. I picked up a PM-1236T lathe and a PM-835S mill as my first machines setting up a hobby shop in my garage. I've been very pleased with both and highly recommend Precision Matthews!
Fantastic video. I've been interested in learning machining for several years. I have been trying my hand in this for a few years as well, making small parts and tools. I really want to move to the next level by learning the proper way to use lathes and mills. Am really looking forward to your next series. Thanks/
This is an infomercial
Another great video Gavin. I purchased the PM1236PEP last year and some of the tips and methods you showed, I will go put to use on my lathe. Thanks!
excellent series i've always hope someone on youtube would do something like this for people who would like to get into gunsmithing and chamber their own barrels, etc. Not much info around the internet
Looking forward to the lathe series.
After 50 years in machining it is easy to tell by how quiet that machine is it is well made.
Good video. I bought the 1340GT. Got the premium tooling.
Congrats, keep me posted on how you like it!
Most certainly will!
What a fantastic thorough video! very helpful...saving my money for this one for sure
I’m actually impressed with that little Lathe. I regularly use a Monarch Model K and 10EE for precision work at the shop. It’s really starting to make the home shop idea pretty attainable.
I have a 16 inch model k in my garage. It's a real work horse for me.
I have a 16x54 model k lathe in my garage. It's a real work horse. Would like to have a EE, or a series 50.
Wow. Well done. Your video was a huge help. Will be giving Matt a call soon!
I'm definitely ready for the fundamentals video! Thank you for taking the time to put all this together!
Joe pi or Mr Pete
Outstanding, This is one of your best....for me as a amateur machinist,.... thanks!
I have ran two different branded lathes that are the same casting design and got to say I love them for doing small delicate work. Hopefully will get a chance to use a PM someday.
Looks like a really high-value unit for $9k. A lathe like the PM-1440GT is on my wishlist for setting up my post-retirement gunsmith shop. Keep up the great work!
thanks for the tour Gavin.
Your video was AWESOME thanks for taking the time to produce this.
Great video. I sure wish that the lathe had a moving shield to protect the lead screw from the swarf.
This hobby is addictive and constantly requires another gizmo. I've got the PM1440HD that I've had for several years. Very sturdy machine weighing in at about 2600#s with its cast iron base. Plenty of power, I'm on 3 phase. I'd like to have the bigger bore but mine came with the D1-4 spindle. In addition to the nice accessory kit I got the taper attachment and the collet chuck with a set of collets from PM. The collet chuck is very nice but is the type that requires considerable turning to close on a different collet. I do repair work on mostly metric equipment so often need to change the gears, kind of a PIA. I do a lot of turning between centers so I can take the work off and trial fit. I've gone to straight-in threading, works fine . No fooling around with two adjustments. I've got a Shars (Deckel knock off) single point tool grinder and I've found that I can regrind carbide inserts for both the lathe and mill. 2 & 4 flute end mills both HSS & carbide can be easily end sharpened. Been playing around making gears with a 8" rotary table, time consuming! As it turns out the lathe is just a minor part of this entire scheme.
Heck, one can't buy what one wants now days. You have to make it. I went to the site which makes these machines while you were demonstrating your lathe. Wonderful tools. You mention that you machine rifle barrels; I saw the taper attachment which was very nice.
I am currently taking a course in gunsmithing and we are dealing with the lathe and milling for this course. You video put into perspective all of the pictures and text that I have read. Keeping in mind that I have no machining experience. It put a visual to the text and was kind of the ah ha moment. It also addressed another concern in terms of tolerances. I get the idea that you want to have the best equipment you can afford, but I can't afford the best equipment. This seems like a great alternative for the small business gunsmith. I subscribe and will be watching your other videos. Nice.
Cant wait for the series I love learning this stuff!
same here. Heck, I better look, he might have worked on it by now.
Wow this was a great review. I learned a bunch and I am looking for the upcoming content.
Excellent video. Great information and insight. Thank you!
Definitely my dream lathe too! Also, amazing job go the tour. This is the first video I’ve seen of yours and I’m definitely subscribing! 🤙
Gavin, thank you for the in depth review and info on the PM1440 GT. I purchased this exact lathe and PM14x49 mill a couple of years ago for hobby machining. The alignment features were great and hope you can cover oil changes on the lathe in the future.
Best regards, Luis
Great video! You are answering so many questions I've had for a long time. Fantastic setup and manufacturing or your own tools. Looking forward to watching the fundamentals videos!
Very nice Gavin well-organized. I was a Millwright shop lead man and I love to organize and I had people laughing at me. But when we needed a part and the lines are down we could go right where we kept them and get things back going. We made aluminum beverage cans at 2000 cans per minute they did not like to see the machines stopped.
Nice, good work Robert- if you can't place your hands on your tools, you'll waste time, every time! :)
I love the video! I am a gunsmith and I recently bought the PM 1340 GT. I would love to see a video on how you installed the DRO. I am looking to pick up a PM mill in the near future, so your videos are a great resource, thank you!
I’m looking to get my first lathe. Zero lathe experience. Trying to decide if I want to start small with something like a 10x22 or jump right in with something like the G4003G or PM1236.
Edit: I ended up finding a used ENCO 12x40 Gearhead from a local machine shop. 3.2 hp 3 phase motor. Excited to get it up and running.
Great review. I've had my PM1340GT lathe for about 5 years now and still love running it every time, the PM1440GT was not available yet when I purchased mine but still haven't been up against the work envelope yet although I've been close a couple of times. You are right about Matt, he is great to deal with and very hands on. Love the custom touches, that was one of the first things I did to mine as well was to add custom accessories to make it my own and tailored to my use.
Mike
I know it’s a 2 year old comment but maybe you’ll see this, how often do you find the 1340s 1-9/16” bore restricts you and this 1440 with the 2” spindle bore would have worked?
@@omgwtfits7612 personally I have not encountered anywhere that the 1-9/16" through bore has been a restriction. Would a 2" bore be better? Absolutely, but I have not been unable to machine what I've needed to on my PM1340GT.
Hope that is helpful.
Mike
I love the videos about this lathe. Joe Updike from Accurate Rifle Systems and Robert Waggoner from Alamo Precision recommended it. It looks like I'll be pleased with a great gunsmithing lathe.
amazing review! thank you for sharing
gavintoobe,
I appreciate the time you took in coordination with Precision Matthews to put this very detailed vid together. I have been in contact with Matt at PM, but on the fence between the PM1440E-LB and the 1340GT. Not exactly the same as what you are showing but from what I see, minuscule differences in some size areas - and nothing more. Based on your vid, I will be taking a closer look before I purchase the China made lathe. Thx.
The tool holder are so great.
Your work area is always spotless!
Guna have to come back to this, but wow, your so much more than a reloader and a man with a gun build, you really know your shit. Super impressed!!
Thanks man!!!
It is because of this page I just ordered a PM1440GT and 1054TV mill.
AWESOME! You'll love them! Can you send me pictures when you get them? My email can be found here: th-cam.com/users/gavintoobeabout
Yes, sir I will. I am waiting for the check to arrive from my bank, I'll deposit and turn around in a cashiers check to PM. Have been corresponding with Nicole there regarding pre-shipping inspection of both machines. The response and willingness to work with customers is refreshing in todays' society. It'll be about 90-days before they will arrive. The machines will travel to Seattle, then on Alaska Marine Lines for shipping to Western Alaska via oceangoing barge. I will have my shop ready for them, and the electrician will be kept up to date so once they're here he can wire my place quickly. I bought the 3-phase 1440GT so I can use a VFD. Your set-up looks ideal regarding collets and workholding. I bought another rollaway toolchest just for this occasion. Really looking forward to this. :) @@Ultimatereloader
Hey Gavin, like I said three months ago; it'd be 90-days. Should be here by next week. Will be a big deal getting them into my shop. Not impossible, but tough. @@Ultimatereloader
Awesome organization, awesome lathe.
THANK YOU SO MUCH. I spotted PM tools about a year ago. I was gonna drive up this summer and look them over because, honestly, for less than the cost of a used car I can equip a "complete" shop with their stuff. But IS it any good? I'm a hobbyist, not a production shop, but after seeing these in action I know I could run them every day and they'll last longer than will. You videos saved me a nasty drive up to Pittsburgh. THANK YOU. KEEP DOING IT.
i`v been waiting too long to pull the trigger on this lathe... this video pulled it for me
thank you so much.
Good deal! I'm sure you'll love the lathe. What do you plan to do with it?
I really like this lathe. I am busy looking at buying my first lathe and Milling machine. However here in South Africa, I don't think this machine is available. Everything is super pricy here as well. Well that been said I still like the PM Lathe. Thank you for the demo. I liked it.
Amazing video! I usually just watch your content for the firearms and reloading stuff but this is really awesome and making me wish I had a lathe too haha. I’m studying Mechanical Engineering right now and this is just plain fun to see principles put into real life practice. Keep it up!
Good deal, another ME in the making! That was some of the best times of my life (studying ME at WSU)
Thanks for a fantastic tour!
Pretty freaking great presentation, thanks so much
I’ll be waiting for your fundamental’s videos.. should be interesting
Would I be crazy to get into a 1340GT as a first lathe? I have no experience with machining, but have said to myself "If only I had a lathe" hundreds of times. It is quite a hefty investment, but I don't want a machine that I will outgrow in a few years, and there is always money to be made with the proper equipment. Appreciate the quality of the video.
Really enjoyed the video, one thing entered my mind, keeping collet out in the open in trays makes them susceptible to dust imo, I keep mine in a toolbox drawer. Just wondered if my concern is over thinking things
Excellent video. Thank you!
Great job once more
This was a very well done presentation and great ideas.
Glad you liked it!
Great overview, thank you for posting. Answered all of my questions. I also appreciate your style of organization.
@gavintoobe Thank you so much for this Video! I just found this Video, and am now a Subscriber. This Video alone is worth it's weight in gold for someone looking to getting into Manual Lathe work.
I am a Welder/Fabricator, and I have been biten by the Machining Bug very badly. I've always been interested, but never had time to go to school to learn this, now with the Technology available today a person is actually able to learn Machining, manual as well as CNC from the comfort of their home, when they have the time available, thanks to youtube, Instagram, etc, because of Guys like you, Titan Gilroy, and many others. I am so glad to hear you say that you have put together a complete educational video series for Manual Lathe & Mill. I have been looking for quite some time for somebody to have this exact series.
I have been on the hunt for my first Lathe and Mill. The problem with most used Lathes is they are beat to hell. Lately, I have been seriously considering purchasing a Precision Matthews. Now you have convinced me. As far as a Mill goes, I think I am gonna exercise my patience and hold out until I find a Bridgeport in really good condition for a fair price.
I will be checking out all of your other Videos, and binge watching this weekend. You will probably being getting many questions from me in the future.
Thanks again, and keep up the good work.
Regards, Phillip Chambers
Hi. Just found this. Very nice review. I am looking for a new lathe. I’m curious - have you been able to break chips on this lathe - i.e. C’s and 6’s? I only saw birds nests in your review. What surface finishes have you achieved?
Edit: that .200 cut was pretty nice. Looks like it ate that up no probs - could maybe have broken the swarf up with a slightly higher feed? Nice finish too. 👍
A great lathe to own and a great demonstration 👍
Loved my old Logan 11",still working to this day! irony was i didnt get a steady rest with my logan either! lol
Awesome!
Good review.
You are correct about the improvement of surface finish switching from a single phase to a three phase motor. The single phase motors cog, or accelerate and decelerate somewhat during rotation, and this can transfer to the workpiece when running fast, say 1:1 ratio from motor to workpiece. Also , the reversing function for metric threading on an imperial machine is much better. Have fun with your new purchase.
You are very complacent around the lathe. I read through the comments section and it looks like there are a lot of people who look up to you and are learning a lot from your videos. You should be talking about safety and also be practicing it. I know you are an excellent machinist, and you are comfortable around these machines. But when you are making videos that beginners are watching you should remember the fundamentals that you learned from whoever taught you. Sorry to nit pick, you really are a very talented and knowledgeable machinist.
nice video- great info, you should use cut foam shadow boards for the drawers with tools and tooling, its even considered a Kaizan principle within lean manufacturing / TPS
It is noteworthy that some individuals utilize lathes that are 50 to 60 years old, which are significantly less expensive than contemporary machinery, yet they consistently produce superior workmanship. The rifles crafted by these experienced gunsmiths often exhibit a higher level of accuracy compared to those produced using advanced machines like the Precision Matthews 1440GT. This observation underscores a fundamental truth in manufacturing: the quality of the output is not solely determined by the machine itself but also by the expertise and craftsmanship of the operator. Consequently, extensive investment in equipment is not always necessary to achieve exceptional results. Precision Matthews PM-14401440GT nevertheless is a wonderful piece of equipment
Very nice machine. I can see rifle barrels being cut on that machine. With the outboard spider and JGS floating reamer holder you are ready to thread and chamber. Great video!
Really like your shop looks like an awesome lathe my shop is set up in the dining room all I have is the small sieg machines I only recently found precision matthews after seeing this video I believe that they are as good as they advertise. Thanks for a great video.
Very very cool lathe. Great video production as well. Next time show us how the micrometer stop works please. Ciao, Marco.
When is the lathe series happening?
Where are those fundamental videos? I only found like one.