FINALLY! A QUICK RELEASE ROOF TOP TENT MOUNTING SYSTEM!
ฝัง
- เผยแพร่เมื่อ 5 ก.ค. 2017
- The Front Runner Quick Release Tent Mount kit allows Roof Top Tent owners to remove their tent from their vehicle in seconds without any tools.
Need your daily driver back? Don't fit in your garage? Save precious sweat, tears and time. Quickly and easily remove your Roof Top Tent without tools.
Once these brackets are installed on a Front Runner Rack, no tools are needed to remove or mount a roof top tent. Just release the tabs on the 4 latches and in seconds, lift the tent away.
No more wrenching in tight spaces during the “off-season” or weekday removal of a roof top tent.
Currently compatible with the Front Runner Roof Top Tent - by Front Runner (TENT031) and all Autohome / Maggionlina tents.
This strong and rattle free mounting system is built off-road tough for use with Front Runner Racks.
Tents can be mounted at 2 different heights, depending on clearance needs. The bottom of the tent can sit either 40mm or 17mm above the rack slats. Certain tent sizes and designs will dictate the height needed to clear the edge of the Front Runner Rack. Fitting instructions are included.
4 low profile base brackets are bolted to a Front Runner Rack and 4 self-aligning bushes are secured to the the tent base channels using the supplied plates.
The brackets latching system feature a safety catch.
No tent modification required.
Removed tents can be stored on the ground, raised slightly off the floor by the supplied steel bushes.
Supplied with all required mounting hardware and a special installation tool.
Get yours here:
www.frontrunneroutfitters.com...
__________________________________________________________________
For more information please visit: www.frontrunneroutfitters.com
ROAM WITH US
Subscribe to TH-cam
Facebook: / frontrunneroutfitters
Instagram: / frontrunneroutfitters
Twitter: goFrontRunner
#FrontRunnerOutfitters
#FrontRunner
#BornToRoam
WE’RE HERE FOR YOU. CONTACT SUPPORT:
support.frontrunneroutfitters...
Email: info@frontrunneroutfitters.com
Phone: 866-840-0321
__________________________________________________________________
Works with any vehicle with a Slimline II roof rack, including:
JEEP
Wrangler JKU, Grand Cherokee, Patriot, Liberty, Renegade
TOYOTA
Tacoma, Tundra, 4Runner, FJ, Land Cruiser, Highlander, Hilux, RAV4, Sequoia, Sienna, Kluger, Prius
LAND ROVER
Defender 110, Defender 90, LR3, LR4, Range Rover, Discovery, Freelander, Evoque,
MERCEDES-BENZ
G-Wagon, CLS, E Series, GL, GLK, ML, R Class, Sprinter
SUBARU
Crosstrek, Forester, Impreza, Outback, Tribeca, WRX, XV
CHEVROLET
Captiva, Cheyenne, Colorado, Equinox, Express, Silverado, Suburban, Tahoe, Trailblazer, Traverse, Trax
BMW
3 Series, X Series
BUICK
Enclave, Encore
CADILLAC
Escalade, CTS, SRX, XTS
CHRYSLER
Town & Country
DODGE
Durango, Grand Caravan, RAM
FORD
E, F-Series, Escape, Ranger, Expedition, Explorer, Bronco
GMC
Canyon, Savana, Sierra, Yukon
HONDA
CRV, Odyssey, Pilot, Ridgeline
HYUNDAI
H1, Santa Fe, Terracan, Tuscon
INFINITI
EX, FX, QX
LEXUS
GX, LX, RX
LINCOLN
Navigator, Mark, MKT, MKX
MINI
Cooper
MITSUBISHI
ASX, Montero, Outlander, Pajero, Strada, Titon
NISSAN
Frontier, Armada, Juke, Navara, NV, Pathfinder, Rogue, Titan, XTerra
SCION
XB
SUZUKI
Jimny, Grand Vitara, S-Cross
VOLKSWAGEN
Amarok, Caddy, Crafter, Golf, Jetta, Routan, Saveiro, T5, Tiguan, Touareg, Transporter
VOLVO
V60, XC
Don’t see your vehicle on the list? Contact us, we can always find a solution for you.
Just here for Frankie...
Entertaining lol. 😅 thanks for the info
Frankie would get it!!
Just here for Frankie... (c) when those gonna be available? we need 2 sets here in Dubai asap))
I'm interested in both your rack and roof top tent. Is the Toyota a long or short bed? Thanks
Could you please tell me what is the difference between the quick release systems TBMK008 and TBMK011? To me both look the same!?
Loved Your competition and in particular the human voice failure in calling the bank :-)
Just got a No Boundaries 10.6 Rv an have Rhino rack that came mounted on the roof. Was wondering if these brackets would work to mount my CVT tent to my Rv. Thank you Rhino said could drill holes but since is new an under warranty I do not want to do.
Hi there, if I mount these quick release mounts from underneath the rack to get a low profile, is there enough room to put my hand in to lock/unlock the tent?
i settup a hoist in my garage so i back up, connect my entire bed rack, lift it all as one unit and i have my bed free again
Are these compatible with a Tuff Stuff Alpha? The tent uses square head bolts in rails to mount to the u bracket.
will these work with ikamper and can the mounts be mounted 90-dgress from shown (e.g. insert tent left to right instead of forward
Would it be possible to weld the base mounts to my metal tube rack and then mount the other piece to my channels on a MIA aluminum clam shell tent? I need a quick release system and want to use yours. Thanks
What type of lock (security) do they have? Getting stolen, is definitely high these days. What type of security do these have, in preventing that?
Do you sell just the tent mounting channels to install on my current tent? Or will the mount fit in my MIA hard shell tent channels? Thanks
Can I use the TBMK012 to mount my Roofnest Falcon to FR Slimline II rack?
Do these fit onto a Rhinorack platform? And is the release system lockable?
If it's quick and easy for me, it's quick and easy for thieves. Any suggestions on how I could add a quick locking mechanism?
Is the quick release mount able to be used on other branded roof racks, e.g. ARB? Looking to install these on an ARB rack with some mount adaptors they have.
Is there a way to add a lock or something to add security?