I need your help. I had my clutch replaced. But my gearstick is Slanted towards the passenger side on my left and when I hit reverse it hits the hand brake now. What is wrong with it please help!
Hey bro quick question,with the auto loom the battery cable that runs to the battery is connected but manual loom is separate cord running from the battery to the back of the alternator I assume?lmk if you can thanks bro🎉
Hey bro i think the battery cable was part of the engine loom, I can't remember if it was separate sorry. We sold the car last year. What are you having trouble with?
I've been experiencing a weird sound after 6k rpm after my manual swap it sounds like gears but it's definitely not the transmission, has anybody had the same issue
Thanks for the vid, I have just one questions. Did you have any issue because ECU swap since engines are a little different. I mean manual has more aggressive cams and higher compression. Maybe it ran richer? Or did you feel it as an upgrade? Thank you
@@adriandc5 yeah, the question we are asking is, does it run correctly with the manual ECU? The Manual and Auto Engines are slightly different and I would expect them to have different maps on their ecus
Yeah bro you can run auto diff on a manual. I believe the manual diffs are lsd a01b and auto diffs are open a01a you can check on your vin tag it should say what diff you have
Hey bro quick question is the rear end of the auto driveshaft the same as the manual ? I know the front end that goes into the tranny is a different length just curious if the rear end are the same
Hey man oh cool bro, yeah the only thing I couldn't plug in was the o2 sensor. The Autos have there's on the engine loom while the Manuals have there's on the body loom. I wanted to get one from a wrecking yard but I couldn't find one 🤦♂️
Usually start with Wheels and Height first bro, 18x9 wheels with a 20p offset is pretty good fitment man but there's room for more haha, Be ready to spend up buddy 😁
Hey bro scored the Manual Conversion for $500. It was already removed! But we ended up buying a new clutch kit and got the flywheel skimmed, That costed about $450, Then add on fluids etc.. So about $1000 NZD all up bro! Cheers
Awesome 👌 and the car looks great..love yous xxx
Thanks mum love you 🙂❤️❤️❤️
you rock bro loved watching and learning keep it coming brother
Cheers thanks man appreciate it! 💯
Bro won in life congrats men 🎉🙏👌
Mean vid bro, cars looking good I reckon a set of black angle headlights with a roof spoiler would top it off
Cheers thanks bro! Haha yeah man that’s on the list! 😁
Awesome mahi thanks for sharing 👍
Hey bro awesome btw ✌ was wondering what your wheel fitment is and what springs you've got chur!
Hey bro cheers man! There RPF1 Reps, 18x11 10p & 18x9.5 12p 😎 Tein shocks and springs alround 🤟
Just subbed bro. Got my Altezza a week ago and looking to learn more about it.
Cheers thanks man!
yup, shes a keeper.
Gangsta video bro … did ya need to change the trans mount?
Also guessing ya in NZ too… how much all up did it cost?
Hi, can you help with the O2 sensor wiring? I have swapped mine too. Changed the loom and ECU but now trying to figure out how to wire the O2 sensor.
Bro im having the same problem did you figure it out?
Nice video bro, have to do the same cause I'm pulling out the 3S GE and dropping in a 3S GTE ST246 into my other Altezza
th-cam.com/video/Kv9sO2rZ77M/w-d-xo.html&ab_channel=Lashajdm
Bro had his parts on the couch 😂
Hahah 😅
Bro im doing a swap right now and I notice that the 02 sensor wiring plugs are not on the manual loom.. any help please
Made it look easy as bro
likely the world record number of click peace in one video
Did you have to do anything with the auto shifter wires/plugs just finished mine it will crank but not start
How much cost is the parts might just get one manual but never driven a manual
looks good my dude
Cheers thanks man! 💯
Hey nice vid bro...what size pipe you recommend for a sweet exhaust sound?
Hey thanks man! 2.5 inch pipe and a decent size resonator should be sweet bro 👌
I need your help.
I had my clutch replaced.
But my gearstick is
Slanted towards the passenger side on my left and when I hit reverse it hits the hand brake now.
What is wrong with it please help!
Solid stuff brother👌
Do you do classes bro
No sorry bro, what did you wanna know?
Did you get everything off eBay because I’m having issues finding some stuff
Hey bro quick question,with the auto loom the battery cable that runs to the battery is connected but manual loom is separate cord running from the battery to the back of the alternator I assume?lmk if you can thanks bro🎉
Battery*
Hey bro i think the battery cable was part of the engine loom, I can't remember if it was separate sorry. We sold the car last year. What are you having trouble with?
@DaxReihana-RFB where can i get a conversion kit like that for my altezza? Ill like to convert my altezza 3sge to manual
Hey bro, need your advice.
My altezza produces alot of heat around the peddle area.
The exhaust under the feet
Hay bro have you e a rried to do a burnout on ur car when it was auto an if so is there s traction control button
I haven't seen any videos of the clutch pedal install yet. Is it easy
I've been experiencing a weird sound after 6k rpm after my manual swap it sounds like gears but it's definitely not the transmission, has anybody had the same issue
Might be roller bearings in the gear box going bad.
Thanks for the vid, I have just one questions. Did you have any issue because ECU swap since engines are a little different. I mean manual has more aggressive cams and higher compression. Maybe it ran richer? Or did you feel it as an upgrade? Thank you
yeah that would interest me aswell
he said he used manual ecu
@@adriandc5 yeah, the question we are asking is, does it run correctly with the manual ECU? The Manual and Auto Engines are slightly different and I would expect them to have different maps on their ecus
Do you guys have any info if the keys will work normally after changing the ECU? Or do you need to empty the manual ECU from the old key info?
@@TheLeewi98 Don't think any of them are coded?
Hi bro, what's the difference between manuel differentiel and auto differentiel? Can i use auto differentiel on manual gearbox?
Yeah bro you can run auto diff on a manual. I believe the manual diffs are lsd a01b and auto diffs are open a01a you can check on your vin tag it should say what diff you have
Hey bro quick question is the rear end of the auto driveshaft the same as the manual ? I know the front end that goes into the tranny is a different length just curious if the rear end are the same
nice car man, i wanna swap my auto is200 so bad
Hi, I wish to know the made and specs of the magrims. I like them
I own this car now😂
Hey man oh cool bro, yeah the only thing I couldn't plug in was the o2 sensor.
The Autos have there's on the engine loom while the Manuals have there's on the body loom. I wanted to get one from a wrecking yard but I couldn't find one 🤦♂️
How did you unbolt the torque converter?
Hey bro, just wondering if the manual starter motor is needed for the swap?
they the same
Nah bro auto one works!
Man cant wait too manuel swap mine.
Yeah man lots more fun! 😁😎
@@DaxReihana-RFB any tips when modifying an altezza i got a lot of plans but just dont know where too start.
Usually start with Wheels and Height first bro, 18x9 wheels with a 20p offset is pretty good fitment man but there's room for more haha, Be ready to spend up buddy 😁
@@DaxReihana-RFB thanks man, im ready too spend up large
chur bro, did this pass wof/cert for cutting the chassis? am wanting to do this for my car. cheers
hey, did you every get around to doing this job? just wondering how much it would cost.
Where did you get that neo 1 bumper from?
What the names of the transmission
How much did it cost to manual swap?
Hey bro scored the Manual Conversion for $500. It was already removed! But we ended up buying a new clutch kit and got the flywheel skimmed, That costed about $450, Then add on fluids etc.. So about $1000 NZD all up bro! Cheers
Did you have to change the coils ?
No u don't need to
Did you need to change the pilot bearing?
Hey bro nah man the pilot bearing is in the Flywheel! 🙂
Hey do you need to change the gauges ?
Also do you need to replace the drive shaft
Gauges are the same besides the small display on the right Wich shows ur kph in the manual
Yes the automatic and manual gauges are different. Manual has a higher rev limit and also records the speed and rpm differently
Yes u need to change the driveshaft as the automatic driveshaft is either shorter or longer than the manual own due to the length of the gearbox
can locate me a bellhousing please