9 Awesome And Great Sounding Locomotive Engines
ฝัง
- เผยแพร่เมื่อ 15 มี.ค. 2017
- Follow me on Instagram - @VisioRacer - for more car stuff. And subscribe to my channel here: bit.ly/SubToVisioRacer
- Follow me on -
Instagram: / visioracer
Drivetribe: bit.ly/DT_VisioRacer
Facebook: / visioracer
Google+: plus.google.com/+VisioRacer
- Music -
'lifecouldbeadream' by future james
/ lifecouldbeadream
- Disclaimer -
This video is fair use under U.S. copyright law because it is transformative in nature, uses no more of the original than necessary and has no negative effect on the market for the original work.
- Credits -
“EMD 16-645E3 Startup” by piepants64
• EMD 16-645E3 Startup
“Locomotora EMD GT-26 #9403” by Carlos Contreras
• Locomotora EMD GT-26 #...
“CSX 1210 (MP15t) Radio Controlled Loco Jacksonville, Flordia CSX McQuade” by James DJ Wolf
• CSX 1210 (MP15t) Radio...
“Switching out Diamond Crystal with an MP15T” by FL92002
• Switching out Diamond ...
“(HD) FULL POWER! EMD MP15's at FULL POWER. Great Sound! Passenger Train!” by railjames
• (HD) FULL POWER! EMD...
Slow start up GM-EMD 16-645 (very cold engine...)” by Knut Ragnar Holme
• Slow start up GM-EMD 1...
“CSX Autorack train with EMD GP15T #1515, Former Conrail + SD40-3 @ Candiaguia Rd. Railfanning 7-1-13” by pittsfordredfox
• CSX Autorack train wit...
“Starting SCL EMD SD45 #2024” by Tom A
• Starting SCL EMD SD45 ...
“The Sounds of the EMD 645 Diesel Engine: Start Up, Idling, And Notch 8!” by WATWAREHD
• The Sounds of the EMD ...
“EMD V20-710 Start-up and rated load. The original video!” by inothome
• EMD V20-710 Start-up a...
“NS' 5,000 Horsepower Workhorse: The SD80MAC” by CJ Bolish
• NS' 5,000 Horsepower W...
“Paxman V12 Diesel” by semidiesel
• Paxman V12 Diesel
“Valenta Sunset. THE MOTHER OF ALL HST STARTS” by peak45
• Valenta Sunset. THE MO...
“Paxman Valenta HST in stereo” by video125co
• Paxman Valenta HST in ...
“Napier Deltic engines arrive at the Anson Engine Museum” by TANISLA2
• Napier Deltic engines ...
“Baby Deltic engine start after revised coolant system installed” by napierhero
• Baby Deltic engine sta...
“55 019 deltic start up york 26/10/15” by Nigel Dakin
• 55 019 deltic start up...
“Deltic D9009 Alycidon roars up Whiteball with 'The Torbay and Dart Explorer' 04/07/2015” by Full Steam Ahead
• Deltic D9009 Alycidon ...
“First Cummins QSK95 Marine Installation” by CumminsEngines
• First Cummins QSK95 Ma...
“Raw Footage of Siemens Charger SC-44 4601 Cummins QSK95 Testing @ The TTCI in Pueblo, CO (125 MPH)” by Fan Railer
• Raw Footage of Siemens...
“Indiana Railroad in New Unionville Indiana (Cummins Test Loco)” by Walter Friesel
• Indiana Railroad in Ne...
“CSX Q643 In Blue Island with Cummins Testbed ex Union Pacific Locomotive” by chessie railfan 4802
• CSX Q643 In Blue Islan...
“Cummins QSK95 Demo” by Kevin Burkholder
• Cummins QSK95 Demo
“VP185 HST Cold Start Mega Clag in Leeds Station” by Banjostrings07 HD
• VP185 HST Cold Start M...
“EMT 43064 departs St Pancrass with mega clag!” by Clagmaster
• EMT 43064 departs St P...
“BEST PAXMAN VP 185 THRASH” by GRANDCENTRAL43067
• BEST PAXMAN VP 185 THRASH - ยานยนต์และพาหนะ
No, this isn't a car channel only. I love cars as many of you do, too, but I admire anything with an internal combustion engine. Locomotives are cool as well 😠👍
VisioRacer hey anything with a engine floats my boat. Other than a Prius.
VisioRacer YES MORE OF THESE PLEASE!!!!!
VisioRacer do more of these
VisioRacer steam engines
VisioRacer I agree
Fun fact, EMD, although currently owned by caterpillar, at the time of these engines being designed though, EMD was wholly owned by GM, yes, as in General Motors, GM also owned Detroit diesel at the time, and often shared tech between the 2 companies
Detroit was often considered to be EMD's little brother.
GMC/GM is where the Detroit Diesel nickname Jimmy comes from.
the emd is the big brother because the 6-71 was designed first and there are a lot of borrowed ideas mainly the fuel injectors
The EMD 567 predates the 71 series DD by a year.
yep. we use 16 645 e3s where i work and use detroit diesel generators. the similarity in design between the two makes maintenance fantastic
I have always loved the low frequency rumble of the big EMD diesels.
I know right? The 710G3B on the GT46PAC sounds ultra intimidating
Dope, I like trains.
yeah me too :)
Garrett Carrigan me too dude
yez my dude
Diesel sound better than tesla ...
a Prius sounds better than a Tesla lmao
Pixel Division search for ES64U, it sounds better than diesel trains.
hell yeah hybrids
A tesla assembly the size of that thing will have 20 times more torque for 10 seconds then the battery is flat
and petrol
Anything can fit in a Honda. I promise you.
Bet anyone of these can fit in a Prius?
draders43 sample text or a geo metro
Even a saturn V F-1 gas gen rocket?
Even my lawnmower ?
Anticapitalista 100% a lawnmower. I'll even give the train engine v tec
There are thousands of EMD 567's, which were in production from 1939 to 1965, then the 645 went into production from 1965 to 1984, then the 710 engine went into production from 1984 to still in production today. Still in service all over the world in locomotives, marine, and generator service. A great engine with a fabulous service record.
29,000 EMD 645s were built in total from 1965-1983
I'm glad the HST made this list, it's a great piece of British engineering
I'm glad that the 55 deltic also featured. One of my favourite heritage diesel loco's
Napier Deltic and Paxman Valenta absolute legendary engines.. of course the Glasgow built merlins being the best Engine humans have ever created especially the later 2 stage2 gear ones when they really pushed it. Back them days they never realised the looser low compression Merlins were capable of being blown or supercharged to silly power. The Scottish designers and testers of the original PV engine that was built as a race plane engine for Rolls Royce figured out that if the engine was a well made one as far as crank balance and it sounded good ans started first time every time.. but had initially failed the compression check evenly that it was allowing "blow by" they then noticed they engines could run copious amounts of power before failing as long as oil pressure was on the ball. The rest is history. You can all thank some Very Inteligent Scottish people and that's no lie.
I was expecting a locomotive donut at the intro :P
Alexander Shevtsov
Haha! 😂
MULTI TRACK DRIFTING?!
That would be cool.
All you'd need are two sets of circular tracks, one nested in the other. Put the front bogie on the inner track, and the rear on the outer track. Boom, train donuts!
DEJA VU
Thomas has the dank engine that produces 420 kg/m of torque and redlines at 1337 rpm
You forgot at 69 psi of blowing pressure
@@ellisjackson3355 oh my god NOAH GET THE BOAT
666 pound feet of torque
And is approximately 21 meters long
Thomas the Dank Engine
All you had to do was follow the damn train CJ
gta san andreas lover
The best game! I got it on PS2
There are still loads of class 55's but most of them are only used on preserved/private railways. However some are occasionally used on historic rail tours :)
as a train driver i've gotta add the british rail class 37! it sounds mad at notch 8.
Agreed there. The Class 37's are awesome ! New Zealand rail fan.
or the Deltic..... awesome sound
There's nothing like the sound of a 12-645E3C-powered DFT class notching up with a big load behind it
Niall Duncan but the deltic is already in the video...
Yes, Jake, I was only commenting on how much I love the sound of the Deltic, not saying that I wished he had included it.... :-)
Scary amounts of torque produced by these. Great stuff as always, and nice to see you doing videos of other types of engines, not just automotive ones
Steam, Jet turbine, diesel electric and Electric. Just love locomotives, Oh and this channel
5:09 that is actually a 16 cylinder not a 20 - this is an SD40M (SD45 carbody converted to SD40-2 specs).
Love the sound of 2-stroke EMD diesel engines 😍
THANKS for this! Locomotives can be just as musical as any car or truck, so I am glad you posted this. Keep up your good work!
Clearly one of your best videos. Especially the EMD content. Congrats!!!
Hey I was there for the second EMD 20-645 clip.
My father works at the GE Transportation plant in Grove City, Pennsylvania where they build locomotive engines. He works another position now, but he used to machine the huge cast turbo cases to tolerances on a vertical lathe. They almost never open up to the public, but the one time they did, of course I went and it was amazing. He's told me stories of engines failing in the testing rooms as and how they have to clean the fluids off the walls haha. If I remember correctly, these GE diesel-electric generators make something like 50,000+ ftlbs!!!
I love all your videos. If it's powered by an internal combustion engine or electric motors, I find it fascinating. you should do a video on military vehicles or heavy equipment. You could do a whole series on those two topics alone :-)
Exceptional job on this video! I love that you show the engine and then the train it is in. Thankyou!
Excellent chronology of rail diesels - thank you for putting it all together!
In Germany in the 70s there was an interesting Locomotive, the Class 210 (DB- Baureihe 210). It had an 12 cylinder combustion engine AND a Lycoming T53 gas turbine that was also used in the Huey Helicopter.
When needed, it could start the gas turbine and create an extra 1150 HP to the wheels.
Unfortunately this only was a short lasting project because the gas turbine was not reliable and there is not a single video of this loco on the internet.
Well done presentation! Good audio and facts.
Love locos! Thanks for putting this together
thanks for this video ^^from 0 to 17 i was in algeria and all days before/after school i walked to the station to see the emd loco running ! great noise.
Great Video! If you ever need any more great sounding diesel railway engines, I have a few suggestions.
Not a huge fan of trains but great video nevertheless. I really like that you started narrating.
yeeeesss.....thats music to my ears...
I like the EMD 12-645 best, as most of my childhood it was used for passenger trains from suburbs to the city & always loved the sound as they pushed 5 or so carriages out of a station at what sounded like full throttle.
(until passenger services were replaced by electric trains which we've had ever since.)
" And most likely wont fit in your Honda" you underestimate the power of dream mate
Thumbs up from the son of an Aussie freight train driver, awesome to see appreciation for all kinds of transport.
My favorite one is the EMD 645 V16 3000HP. Love the sound of these!!
Glad you put some world class British loco engines in dude. We've always led with railway design.
Love the vids/Channel!
Im enjoying these new videos with the commentary. Good work friend.
Another sweet upload! Keep it up as always bro👌🏻
Really nice video, as always. I really enjoyed to see the Screaming Valenta here, wich I could know because of an article on Curbside Classic.
Awesome video dude! Been waiting for a video about trains but didn't think it would actually happen. Time to turn up the Bass!
He said himself it is not necessarily a car channel. It is about anything with a combustion engine. He has made videos about trucks, and other really big engines in the past, and he has included a few engines used in trains in the past. So I was just hoping that he would make a video focused on trains. That is all.
No your fine, I was just explaining myself.
Just had to watch this after your newest video👍
Omg one of your best videos!
Well made video, with technical detailes and documentation. ;)
Good one that thanks
awesome vid 😀
Ten začátek mě rozsekal. :D :D
I love the accent, it makes me pay attention.
Yeah, I don't know why Visio gets so much hate for his accent! He's pretty darn informative and enjoyable to watch, and then the accent haters come in and ruin the comment section.
@@IamSnehan For sure Visio puts in maximum effort and Napier Deltic is said in a unique style I love the vids.
@@danielmarshall4587 true. We have EMDs and even a few GEVOs coming to India, and I love the deep and distinctive rumble of those engines.
thank you very much for replying my request with this video 😂😂😂😄😄😄. YOU ARE THE BEST VISIO RACER 💪💪
;)
Only thing missing is Thomas The Tank Engine theme playing.
All the original characters in the "Thomas" stories were steam locos.
@@davidpeters6536 r/whoooosh
@@electric7487 Not really funny enough for a whoooosh.
great video
As a big railway enthusiast, I really enjoyed this video!
Keep it up, i like this videos
Great comp and intro. I hear you clearly, but appreciate the subtitles all the same.
Kolomna 5D49 engine would be also nice...Very nice vid,
You've got many suggestions for the next time!
This is nice :D great vid.
Awesome
Great videos my dood!
this is the best playlist album I ever heard !
Hey VisioRacer. Do you remember me? Thank you for taking my suggestion seriously. Love your vids. Keep them going!!!
Great video!
Some of these sound awesome
Radosť pozerať ale najmä počúvať Tvoje videá / Pleasure to see but especially to listen your videos :)
dude i love this engines in the locomotives especially the brand new cummins quadturbo i love his damn sound but your english became much better you are the Best but as always good video ;-)
I don't know what constitutes a good sounding train engine so i'll just say good work as always Visio
I really like this video. You should upload more unusual engines. Tanks, construction vehicles, old aircraft maybe? Unique stuff like that.
Visio, I don't know where you get your facts and videos from, but I'd watch you do a list on the 12 most impressive lawnmowers if you made them. You're one of my favorite TH-cam channels and I think a lot of us could say the same!
OOOHHH, you should do best sounding tank engines
nice video
nice topic dude, you can make more video like this, thats very very good dude 😉😊
i love train so much 😍😍
I like trains. I like mechanics. I like heavy machinery. So this pleases me very much.
This pleases the nut
The locomotive @5:38 is actually an SD40M-2: a rebuilt SD45 with a 16-cylinder engine.
All the British Class 41 and 43 produced had Paxman Valenta V12 Turbo, not only the prototypes. GNER Class 43 were the last ones powered by original Valenta.
The Valenta VP185 had 4 turbos instead of one, but the original single turbocharger sounds better. That single turbocharger is similar with that used in Alco 251.
The valentas use to fucking scare the shit out of me when I was younger, but now I miss them cause of DAT TURBO THO
Man, those old trains sound awesome.
Loved trains as a kid. The GE GEVOS sound mean
The rumble of an EMD 710 going full out has to be heard to be appreciated!
I love the sound of an EMD 12-645, I hear them all the time on SW900RS'.
If you do another railroad video, be sure to include the ALCo 251. These engines have a sound all their own, and even though ALCo went out of business in 1969, the 251 is still being produced by Fairbanks-Morse today, it's that good of a design.
úžasné video
You need to make a part 2 with Alco locomotives or from their Canadian sister company Montreal Locomotive Works!!
Saber Tooth Lawn Tigers YES i like the way you think I’m a huge ALCOholic my self.(see what I did there)
Don’t think alco is a sister company. They are a competitor.
Napier Deltic makes all these look like a big Scania V8 to be honest.
As a Brit, we're all pretty much used to being smoked out on the platform by an engine. It's the charm of English rail travel!
I've driven haul trucks powered by Caterpillar, Cummins, MTU, Komatsu, and Detroit engines, and I'd love to have heard an EMD powered rig. The 2 stroke, 1325hp detroit 16V149T engine wasn't especially powerful, but it did sound the best of all of them. At that site we also had a vintage Lectra Haul M120 powered by a Cummins unit with an open exhaust that you could hear miles away.
Oh yes the "overhead shots" letting us really drink in the exhaust note. You know your subscribers thank you.
I wonder if you'll make a sequel to this video, which includes any of the English Electric engines? (my favorites are the 16SVT and the 12CSVT, I love how they whistle yet still growl)
9.30 that deltic was filmed near where i live. sweet
I miss the Class 66 which was a common sight in Europe. It had the V12 EMD 710 and I will not forget the sound it made while pulling a freight train through my railway station.
Correct on the New South Wales eXpress Passenger Train having the Paxman VP185 (we know it as the XPT) - I have travelled on the XPT twice and to say the VP185 is a big engine is an understatement! It's massive but it's also smooth
That's my kind of hybrid!
A class 55 actually contains not one, but TWO deltics!
the noise of the deltic on full chat , awesome
You should do airplane engines next! :D
I heard someone said the Ferrari V12's are bad for environment LOL
Merci♥
My personal favourite is the English Electric 12CSVT as fitted to the Class 37.
4 Stroke 850 rpm, 1750 hp and a hell of a bark when under load
th-cam.com/video/OAT6VtnPNV8/w-d-xo.html
How many cylinders?
@@coydog7902 12 cylinders, 10 inch bore, 12 inch stroke. Turbo charged. Intercooled in V configuration
Turbo chargers are awesome
That's one of my favorite engines used in British Rail locomotives, besides its bigger brother (albeit without an intercooler) 16SVT, fitted in the Class 40.
Cool. Check out the Alco 251.
Nice vid! You should look into multiple unit trains. Trains such as the British Rail Class 150 and British Rail Class 185. Even some of the electric trains sound cool.
And delve into the past with the Class 101's and the 108's!
Would be neat to see a steam locomotives video, too!
The Paxman "Screaming" Valenta was used in the production Class 43 aswell. Not just the prototype Class 41. 195 out of the 197 Class 43 locomotives built had them installed when new, but all have since been replaced.