iFlight Defender 25 with a GoPro 11 Mini mounted
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- In this video, I'm testing the O3 Air Unit vs. the GoPro 11 Mini. I have been flying the iFlight Defender 25 for a few months now and have been using the DJI O3 camera on board. I finally got my hands on a GoPro 11 Mini and mounted it using dual-sided velcro.
Velcro for Mount:
amzn.to/3NdVNGr
GoPro 11 Mini:
amzn.to/3NeLNgc
What are your thoughts!? Let me know in the comments.
Increíble control en tu vuelo. Enorabuena
Thanks so much!!
I’d love to see some light acro with the extra weight on there. I’m gonna try this
Yes, I mostly fly in acro. Works great!
Thank you for your reply!
And did you feel the difference in flight performance between 550mah and 900mah when you flew with a GoPro??
Hey! Yes you do feel the extended flight time with the 900mah. I get a solid extra 2min on the 900mah
Brother, do you think if this same dron Iflight Defender 25 is capable to hold a Dji Osmo Action 4 (155 grs)? Thanks a lot in advance
Here's a question.
Compared to DJI AVATA, can you tell the difference in noise when both are equipped with GoPro??
We don't have an Avata unfortunately so I can not tell you the difference in noise. I'd imagine it's similar!
Hi. great flying, i just got same setup but the drone is so sensitive on the sticks (dji cotroller 2) what are you RATES please?
Hey there! I am using the TBS Tango 2 controller with this drone. The RATES are set to default.
If the noise level of DJI AVATA is 10 out of 1 to 10, can you evaluate defender25??
I would say with that scale, the Defender25 is probably at a similar noise level. Maybe a little less. I would rate the noise 9/10
Flight time with gopro mini 11?
I'm getting about 3min for the 550mah batteries and 4-5min on the 900mah battery!
just tried to mount gorpo 11 on that dorne and the drone is freaking out it can't take off is spining like crazy?
Where did you mount the GoPro? I've found the best place to mount it is the front of the battery as seen in the video.
@@skyviewmediaco i Mounted on the actual mount at front
@@chrisderaBreh
to mount at the front your GP11 needs to be a "naked" setup which is lighter than OEM as the internals of the camera is put into a different case and the camera plugs in to the drone's electrical system@@chrisdera You could also possibly run a GP10 Bones OEM at the front at around 60 grams. It looks like Skyview has mounted his just a bit further back to center of gravity to account for the weight of the unmodified GP11 Mini which comes in at 154 grams.