In regards to keeping the grab bars on with the luggage? It could possibly fit but I can't say for certain. We do sell spacer kits for the C-bow that allow you to move it out away from the bike more. Link below. www.motomachines.com/hepco-becker-c-bow-width-spacer-kit
Thank you for the feed back and advice with the spacer kit. The spacer Kits has 4 screws / bolts for secure assembling of the c-bow. Unfortunately the main Carrier of the trident has only 3 screws holes for whatever reason. The Carrier you offer for other bikes has 4 holes. Not reasonable for me, or do you recomment assembling of the c-bow with 3 bolts only??
@@basics2802 its a universal spacer kit, so they put 4 bolts because that is what most of the C-Bow kits use. You'll be just fine using 3 of the 4 bolts.
Very nice easy to mount . But BUT it doesn't fit whit the triumph option rear handle and that to bad . A few inch out and the bag will have slip to the rack .😩
We are planning to do a video on the Evotech Tail Tidy when it comes in so stay tuned for that. In my experience in the past, sometimes there are fitment issues between aftermarket tail tidys and C-Bow carriers, but that is EASILY remedied with the spacer kits that are available on our website.
Yes it is! There is only 1 hard case option for the C-Bow system and it is the Orbit Side case. Each case is 11L of storage for a total of 22L. www.motomachines.com/hepco-becker-orbit-side-cases-c-bow-carrier
We recommend using the specs in your owners manual. Because we didn't have a torque wrench on hand I tightened it to what I thought would be acceptable. But we ALWAYS recommend using a torque wrench. -Michael
I had these bags on my mt09. They are awesome. Great quality.
These bags are awesome. Had them on my mt09.
They look great.
Can you ride 2 up with those side bags installed? If yes, does it constraint the passenger in ant way comfort wise? :D
Yes! You can! As far as comfort goes im not sure, as I've never ridden on the back or taken anyone on the back.
That's looking very nice. I wish was available in India.
There are Hepco & Becker distributors in India.
Can you do this with the Top bag rack as well?
The install? We have another video of the rear rack install.
Do these also work with the evotech tail tidy, as well as the top case attachment set up from hepco?
Is there also an solution if you have installed the oem triumph grab bars for pillion passengers?
In regards to keeping the grab bars on with the luggage? It could possibly fit but I can't say for certain. We do sell spacer kits for the C-bow that allow you to move it out away from the bike more. Link below.
www.motomachines.com/hepco-becker-c-bow-width-spacer-kit
Thank you for the feed back and advice with the spacer kit. The spacer Kits has 4 screws / bolts for secure assembling of the c-bow. Unfortunately the main Carrier of the trident has only 3 screws holes for whatever reason. The Carrier you offer for other bikes has 4 holes. Not reasonable for me, or do you recomment assembling of the c-bow with 3 bolts only??
@@basics2802 its a universal spacer kit, so they put 4 bolts because that is what most of the C-Bow kits use. You'll be just fine using 3 of the 4 bolts.
@@MotoMachines thank you very much Indeed for reply. Great Support!
Very nice easy to mount . But BUT it doesn't fit whit the triumph option rear handle and that to bad . A few inch out and the bag will have slip to the rack .😩
I wonder if this will fit along with the evotech tail tidy.
We are planning to do a video on the Evotech Tail Tidy when it comes in so stay tuned for that. In my experience in the past, sometimes there are fitment issues between aftermarket tail tidys and C-Bow carriers, but that is EASILY remedied with the spacer kits that are available on our website.
I don’t prefer soft bags, is it possible have hard cases if so what is the name of the case and capacity?
Yes it is! There is only 1 hard case option for the C-Bow system and it is the Orbit Side case. Each case is 11L of storage for a total of 22L.
www.motomachines.com/hepco-becker-orbit-side-cases-c-bow-carrier
@@MotoMachines thank you 😊
That’s useful
Looks like you have to leave the Pillion footrests on for this system to work? Dang :( I love the way the bike looks with them off
They work both with and without the footrests!
How are these with a pillion?
They work fine. We also have spacers available for the C-Bow carrier if you need to move it further back, down or up.
Thing!!! How much?
The link to the product is in the description.
Are these available in the UK
We ship internationally!
How much weight can it hold?
5kg/11lbs per bag
What is the tightening torque (frame/footrest)?
We recommend using the specs in your owners manual. Because we didn't have a torque wrench on hand I tightened it to what I thought would be acceptable. But we ALWAYS recommend using a torque wrench.
-Michael
$229 USD. Not bad at all.
Nope, not at all! This bag setup from Hepco is a fantastic value!
Please don‘t use this terrible music, not necessary!
I had these bags on my mt09. They are awesome. Great quality.